<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	>

<channel>
	<title>Tips &amp; Features &#8211; Sugitama-Lab.</title>
	<atom:link href="https://sugitama-lab.tech/en/category/tips-en/feed/" rel="self" type="application/rss+xml" />
	<link>https://sugitama-lab.tech</link>
	<description>Handy SOLIDWORKS tips, explained</description>
	<lastBuildDate>Mon, 09 Nov 2026 22:41:59 +0000</lastBuildDate>
	<language>en-US</language>
	<sy:updatePeriod>
	hourly	</sy:updatePeriod>
	<sy:updateFrequency>
	1	</sy:updateFrequency>
	

<image>
	<url>https://sugitama-lab.tech/wp-content/uploads/2021/12/cropped-illust_Tool_icon-32x32.png</url>
	<title>Tips &amp; Features &#8211; Sugitama-Lab.</title>
	<link>https://sugitama-lab.tech</link>
	<width>32</width>
	<height>32</height>
</image> 
<site xmlns="com-wordpress:feed-additions:1">205154850</site>	<item>
		<title>SOLIDWORKS Mouse Gestures: How to Customize Them and My Recommended Setup</title>
		<link>https://sugitama-lab.tech/en/solidworks-mouse-gestures-setup/</link>
					<comments>https://sugitama-lab.tech/en/solidworks-mouse-gestures-setup/#respond</comments>
		
		<dc:creator><![CDATA[sugitama]]></dc:creator>
		<pubDate>Mon, 09 Nov 2026 22:41:59 +0000</pubDate>
				<category><![CDATA[Tips & Features]]></category>
		<category><![CDATA[for beginners]]></category>
		<category><![CDATA[initial settings]]></category>
		<category><![CDATA[makers]]></category>
		<category><![CDATA[students & education]]></category>
		<guid isPermaLink="false">https://sugitama-lab.tech/?p=3683</guid>

					<description><![CDATA[Mouse gestures put your most-used SOLIDWORKS commands under the cursor. Learn how to set them up, and see the 4-gesture setup I use for parts, assemblies, sketches, and drawings.]]></description>
										<content:encoded><![CDATA[
<p class="wp-block-paragraph">When you model and draw in SOLIDWORKS, I recommend getting to know <strong>mouse gestures</strong>.</p>



<p class="wp-block-paragraph">With mouse gestures, the cursor travels a much shorter distance to reach a command, so you spend less time reaching for toolbars. That may also take some load off the wrist that handles the mouse.</p>



<p class="wp-block-paragraph">Mouse gestures already work with the default settings. But if you put the commands <em>you</em> use most into them, they become far more useful.</p>



<p class="wp-block-paragraph">This article explains how to set up mouse gestures, and shows the setup I use myself.</p>



<p class="wp-block-paragraph">The setup itself takes only a few minutes.</p>



<p class="wp-block-paragraph">Let&#8217;s get started.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">What Are Mouse Gestures?</h2>



<p class="wp-block-paragraph">Mouse gestures are a feature that appears when you <strong>right-drag</strong> (hold the right mouse button and move the mouse) in the SOLIDWORKS graphics area, the large area where your model is displayed.</p>



<p class="wp-block-paragraph">A ring of command buttons (the <strong>mouse gesture guide</strong>) appears around the cursor. Just slide the cursor toward a button, and that command starts.</p>



<figure class="wp-block-image size-full"><img fetchpriority="high" decoding="async" width="322" height="308" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/mouse-gesture-wheel-en.png" alt="Mouse gesture guide: a ring of command buttons appears around the cursor when you right-drag" class="wp-image-3679" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/mouse-gesture-wheel-en.png 322w, https://sugitama-lab.tech/wp-content/uploads/2026/11/mouse-gesture-wheel-en-300x287.png 300w" sizes="(max-width: 322px) 100vw, 322px" /></figure>



<p class="wp-block-paragraph">With the default settings, the mouse gestures in a part or assembly look like the figure above.</p>



<p class="wp-block-paragraph">If you put your frequently used commands into mouse gestures, you no longer have to move the mouse all the way to the toolbar every time. That saves time.</p>



<p class="wp-block-paragraph">Mouse work also adds up over a day of design. Some people report wrist problems from heavy mouse use, and fewer long cursor movements may help. I do not know how much, but it could be a side benefit.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">You can set mouse gestures separately for <strong>Part, Assembly, Sketch, and Drawing</strong>. (Part, Assembly, and Drawing are document types. Sketch is the mode you are in while editing a sketch.)</p>



<p class="wp-block-paragraph">This is because each of these has its own commands you use most. You might put Extruded Boss/Base in the part gestures, and Smart Dimension in the sketch gestures.</p>



<p class="wp-block-paragraph">To me, mouse gestures are one of the handiest features in SOLIDWORKS.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">How to Set Up Mouse Gestures</h2>



<p class="is-style-supplement-warning wp-block-paragraph">The images in this article are based on SOLIDWORKS for Makers (2022). Other versions can look a little different. For example, in SOLIDWORKS 2017 the dialog was laid out as a grid, and only 4 and 8 gestures were available.</p>



<h3 class="wp-block-heading">Open the Mouse Gestures Settings</h3>



<ol class="wp-block-list">
<li>Open any file in SOLIDWORKS.</li>



<li>Choose <strong>Tools &gt; Customize</strong>.</li>



<li>Click the <strong>Mouse Gestures</strong> tab. The mouse gesture guide window appears to the right of the dialog.</li>
</ol>



<p class="wp-block-paragraph">Here is what each setting does.</p>



<h5 class="wp-block-heading">1. Turn on mouse gestures</h5>



<p class="wp-block-paragraph">Select <strong>Enable mouse gestures</strong>. This turns the feature on. (It is probably already selected by default.)</p>



<h5 class="wp-block-heading">2. Choose the number of gestures</h5>



<p class="wp-block-paragraph">This sets how many commands are arranged around the ring. The default is four.</p>



<p class="wp-block-paragraph">You can choose from six layouts: 2 gestures (vertical), 2 gestures (horizontal), 3, 4, 8, and 12 gestures. The figure below shows how the commands are arranged in each one.</p>



<figure class="wp-block-image size-full"><img decoding="async" width="1506" height="1067" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/mouse-gesture-layouts-en.png" alt="The mouse gesture guide layouts for 2 (vertical), 2 (horizontal), 3, 4, 8, and 12 gestures in Part, Sketch, Assembly, and Drawing" class="wp-image-3680" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/mouse-gesture-layouts-en.png 1506w, https://sugitama-lab.tech/wp-content/uploads/2026/11/mouse-gesture-layouts-en-300x213.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/mouse-gesture-layouts-en-1024x726.png 1024w, https://sugitama-lab.tech/wp-content/uploads/2026/11/mouse-gesture-layouts-en-768x544.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/mouse-gesture-layouts-en-485x344.png 485w" sizes="(max-width: 1506px) 100vw, 1506px" /></figure>



<p class="wp-block-paragraph">The more gestures you use, the more commands you can reach. But it takes longer to get used to them, and you are more likely to pick the wrong one.</p>



<h5 class="wp-block-heading">3. Narrow the command list by category</h5>



<p class="wp-block-paragraph">The list of commands on the left shows every command available in SOLIDWORKS when the category is set to all commands.</p>



<p class="wp-block-paragraph">If there are too many commands and you cannot find the one you want, change the category (or use the search box). The list narrows down and becomes easier to scan.</p>



<h5 class="wp-block-heading">4. Drag a command onto the guide</h5>



<p class="wp-block-paragraph">From the list, <strong>drag</strong> the command you want and <strong>drop</strong> it on the position you want in the mouse gesture guide on the right. If you drop it on an empty position, the command is added. If you drop it on an occupied position, it replaces the command that was there.</p>



<p class="wp-block-paragraph">Do this for each of Part, Assembly, Sketch, and Drawing to build the layout you want.</p>



<h5 class="wp-block-heading">5. Click OK</h5>



<p class="wp-block-paragraph">Click <strong>OK</strong> to finish.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">My Recommended Mouse Gesture Setup</h2>



<p class="wp-block-paragraph">Here is the setup I use. If you are not sure which commands to assign, or you do not want to spend time deciding, feel free to copy it. If you already use mouse gestures, I hope it gives you some ideas for your own.</p>



<h3 class="wp-block-heading">I Recommend Starting with 4 Gestures</h3>



<p class="wp-block-paragraph">I recommend starting with <strong>4 gestures</strong>.</p>



<p class="wp-block-paragraph">In my opinion, four commands are enough to be useful, and the layout leaves room to grow. Two or three gestures feel a little limiting, while eight is a lot of positions to memorize.</p>



<p class="wp-block-paragraph">With four gestures, you learn the positions as you use them. Soon you can start a command before the guide even appears, and move quickly through modeling and sketching.</p>



<p class="wp-block-paragraph">Four gestures use only <strong>vertical and horizontal</strong> movements. Even if two gestures would be enough for you, setting up four costs little, and straight up, down, left, and right movements are easy to tell apart, so you are less likely to trigger the wrong one than with diagonal movements.</p>



<p class="wp-block-paragraph">If you later want more commands, you can move up to eight gestures, which adds the 45-degree diagonals. If you are already used to four gestures, the switch should go smoothly. (For that reason, I would not choose three gestures.)</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Here Is My Setup</h3>



<figure class="wp-block-image size-full"><img decoding="async" width="502" height="532" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/mouse-gesture-recommended-en.png" alt="My recommended 4-gesture setup for Part, Sketch, Assembly, and Drawing" class="wp-image-3681" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/mouse-gesture-recommended-en.png 502w, https://sugitama-lab.tech/wp-content/uploads/2026/11/mouse-gesture-recommended-en-283x300.png 283w, https://sugitama-lab.tech/wp-content/uploads/2026/11/mouse-gesture-recommended-en-485x514.png 485w" sizes="(max-width: 502px) 100vw, 502px" /></figure>



<p class="wp-block-paragraph">The command in each direction is listed below. (&#8593; means moving the cursor up, &#8595; down, &#8592; left, and &#8594; right.)</p>



<figure class="wp-block-table"><table class="has-fixed-layout"><thead><tr><th>Mode</th><th>&#8593; Up</th><th>&#8595; Down</th><th>&#8592; Left</th><th>&#8594; Right</th></tr></thead><tbody><tr><td><strong>Part</strong></td><td>Measure</td><td>Trimetric</td><td>Hole Wizard</td><td>Sketch</td></tr><tr><td><strong>Assembly</strong></td><td>Measure</td><td>Trimetric</td><td>Mate</td><td>Insert Components</td></tr><tr><td><strong>Drawing</strong></td><td>Smart Dimension</td><td>Zoom to Sheet</td><td>Hole Callout</td><td>Note</td></tr><tr><td><strong>Sketch</strong></td><td>Smart Dimension</td><td>Corner Rectangle</td><td>Line</td><td>Circle</td></tr></tbody></table></figure>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">Here is my reasoning.</p>



<p class="wp-block-paragraph"><strong>Down in Part, Assembly, and Drawing</strong> is a view command: Trimetric (an angled 3D view) in a part or assembly, and Zoom to Sheet in a drawing. When I finish looking at one area in detail and want to move on to another, switching to a familiar view first makes it easier to see where to go next.</p>



<p class="wp-block-paragraph"><strong>Up</strong> is a dimension or measurement command in every mode. During design work I often check clearances and spaces between parts, so I assigned <strong>Measure</strong> and <strong>Smart Dimension</strong>.</p>



<p class="wp-block-paragraph">For the rest, I assigned commands I tend to use in each mode:</p>



<ul class="wp-block-list">
<li><strong>Part:</strong> Sketch and Hole Wizard</li>



<li><strong>Assembly:</strong> Insert Components and Mate</li>



<li><strong>Drawing:</strong> Hole Callout and Note</li>



<li><strong>Sketch:</strong> Line, Corner Rectangle, and Circle</li>
</ul>



<p class="wp-block-paragraph">I also tried to put similar functions in the same direction in every mode, so the gestures are easier to remember.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">Summary</h2>



<p class="wp-block-paragraph">This article explained SOLIDWORKS mouse gestures: how to customize them, and the setup I recommend.</p>



<p class="wp-block-paragraph">Once you get used to mouse gestures, they can save you a lot of mouse travel in everyday SOLIDWORKS work. If you have not tried them yet, they are worth a few minutes.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">Mouse gesture settings are also quite personal, and they vary from designer to designer.</p>



<p class="wp-block-paragraph">That is why I am curious about what other people have set up, and which commands they use.</p>



<p class="wp-block-paragraph">If you have a setup you like, I would love to hear about it in the comments.</p>



<p class="wp-block-paragraph">Thank you for reading to the end.</p>

]]></content:encoded>
					
					<wfw:commentRss>https://sugitama-lab.tech/en/solidworks-mouse-gestures-setup/feed/</wfw:commentRss>
			<slash:comments>0</slash:comments>
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">3683</post-id>	</item>
		<item>
		<title>3 SOLIDWORKS Commands for Troubleshooting Errors: Force Rebuild, SketchXpert, and the Rollback Bar</title>
		<link>https://sugitama-lab.tech/en/solidworks-error-troubleshooting-commands/</link>
					<comments>https://sugitama-lab.tech/en/solidworks-error-troubleshooting-commands/#respond</comments>
		
		<dc:creator><![CDATA[sugitama]]></dc:creator>
		<pubDate>Mon, 09 Nov 2026 22:41:57 +0000</pubDate>
				<category><![CDATA[Tips & Features]]></category>
		<category><![CDATA[operation skills]]></category>
		<guid isPermaLink="false">https://sugitama-lab.tech/?p=3677</guid>

					<description><![CDATA[Three SOLIDWORKS commands to try when an error appears: Force Rebuild (Ctrl + Q), SketchXpert for over defined sketches, and the Rollback Bar for failed features.]]></description>
										<content:encoded><![CDATA[
<p class="wp-block-paragraph">Sooner or later, an error shows up while you are editing a model in SOLIDWORKS. It usually looks like one of these:</p>



<ul class="wp-block-list">
<li>&quot;<strong>A feature failed.</strong>&quot;</li>



<li>&quot;<strong>The sketch turned red.</strong>&quot;</li>



<li>&quot;<strong>The shape of the model looks off, and I am not sure why.</strong>&quot;</li>
</ul>



<p class="wp-block-paragraph">In that moment, you may wonder, <strong>&quot;Where do I even start fixing this?&quot;</strong></p>



<p class="wp-block-paragraph">If you leave the error alone, or patch it up on the spot, it tends to come back later as a lot of rework.</p>



<p class="wp-block-paragraph">SOLIDWORKS has tools that help you find the cause of an error and <strong>fix it safely</strong>.</p>



<p class="wp-block-paragraph">This article explains <strong>three of them</strong> for beginners: Force Rebuild, SketchXpert, and the Rollback Bar.</p>



<p class="wp-block-paragraph">Once you know these three, errors become much less scary. If error messages make you nervous, I recommend reading on.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">A Quick Fix to Try Early: Force Rebuild (Ctrl + Q)</h2>



<p class="wp-block-paragraph">When an error appears, a <strong>Force Rebuild</strong> is one of the first things worth trying.</p>



<p class="wp-block-paragraph">You run it with <strong>Ctrl + Q</strong>.</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_ttl"><div class="box_title"><span class="span__box_title">When Should You Use Force Rebuild?</span></div><div class="cboxcomment">
<ul class="wp-block-list">
<li>You changed a dimension or a mate, but the shape or position of the model did not change.</li>



<li>A file that opened fine before suddenly shows an error.</li>



<li>You did nothing unusual, and an error appears anyway.</li>
</ul>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">To keep things fast, SOLIDWORKS normally recalculates <strong>only the parts of the model that changed</strong>.</p>



<p class="wp-block-paragraph">Because of that, the model&#8217;s internal calculation results can, in rare cases, become inconsistent, and a normal rebuild does not always clear it up.</p>



<p class="wp-block-paragraph">A Force Rebuild recalculates <strong>every feature from the top of the FeatureManager design tree</strong> (the list of features on the left side of the screen), which gives the model a fresh start.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">When a model is complicated, <strong>a Force Rebuild alone can make the error disappear more often than you might expect</strong>.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<figure class="wp-block-table"><table class="has-fixed-layout"><thead><tr><th>Item</th><th>Rebuild (traffic-light icon, Ctrl + B)</th><th>Force Rebuild (Ctrl + Q)</th></tr></thead><tbody><tr><td><strong>What is recalculated</strong></td><td>Only what changed</td><td><strong>Every feature, from the top</strong></td></tr><tr><td><strong>Effect</strong></td><td>Reflects small changes</td><td>Resets the calculation and recalculates it from scratch</td></tr><tr><td><strong>How to run it</strong></td><td>Click the traffic-light icon, or press <code>Ctrl</code> + <code>B</code></td><td><strong>Hold <code>Ctrl</code> and press <code>Q</code></strong></td></tr></tbody></table></figure>



<p class="is-style-supplement-normal wp-block-paragraph">A Force Rebuild recalculates the whole model, so on a complex model it can <strong>take a while</strong>. On a small model it is quick to try. On a large one, you may prefer to try a normal rebuild first and use Force Rebuild when that does not help.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">If a document has several configurations (variations of the same model), there is also <strong>Force Rebuild All Configurations (Ctrl + Shift + Q)</strong>.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">For Sketch Errors: SketchXpert</h2>



<p class="wp-block-paragraph">When a sketch has an error, there is a feature that helps a great deal. It is called <strong>SketchXpert</strong>.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph"><strong>Red or yellow lines</strong> in a sketch usually mean that it is over defined: it has too many dimensions or relations (geometric constraints such as Horizontal or Coincident), and some of them contradict each other.</p>



<p class="wp-block-paragraph">It is not always easy to tell <em>which</em> one is causing the problem just by looking at it.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">How to Use SketchXpert</h3>



<ol class="wp-block-list">
<li>In the sketch with the error, look at the status bar at the bottom of the window. You should see <strong>Over Defined</strong> in red. Click it.</li>



<li><strong>SketchXpert</strong> opens. Click the <strong>Diagnose</strong> button.</li>



<li>SketchXpert proposes several possible solutions. Use the arrow buttons to step through them, and pick the one that gives the <strong>shape you intended</strong>. The graphics area updates to show each solution.</li>



<li>Click <strong>Accept</strong> to apply the solution.</li>
</ol>



<p class="wp-block-paragraph">The relations or dimensions that conflict with the shape you chose are removed, and the error should be resolved. Because SketchXpert removes constraints, check that the result still matches your design intent.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Seeing Every Relation: Display/Delete Relations</h3>



<p class="wp-block-paragraph">Another command worth knowing is <strong>Display/Delete Relations</strong>.</p>



<p class="wp-block-paragraph">Open the sketch in edit mode and choose <strong>Display/Delete Relations</strong> from the <strong>Sketch</strong> tab of the CommandManager.</p>



<p class="wp-block-paragraph">It lists the relations used in the sketch, and its <strong>Filter</strong> lets you narrow the list.</p>



<p class="wp-block-paragraph">This way you can see at a glance which relation is the problem, and delete it right there.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_ttl"><div class="box_title"><span class="span__box_title">When Should You Use These?</span></div><div class="cboxcomment">
<ul class="wp-block-list">
<li>The sketch is shown in <strong>red or yellow</strong>.</li>



<li>You <strong>cannot tell at a glance</strong> which relation is causing the error.</li>



<li>You want to move a sketch line, but it is <strong>fully defined and will not move</strong>. (Display/Delete Relations lets you find and remove the relation that is holding it.)</li>
</ul>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">Keeping every sketch <strong>Fully Defined (black)</strong> is the basic habit behind stable, error-free models.</p>



<p class="wp-block-paragraph">Use these tools to keep your sketches clean.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">For Feature Errors: The Rollback Bar</h2>



<p class="wp-block-paragraph">A SOLIDWORKS model is built from a <strong>history</strong>: features stacked one on top of another.</p>



<p class="wp-block-paragraph">When one feature fails, the features after it often fail in a chain.</p>



<p class="wp-block-paragraph">At the very bottom of the FeatureManager design tree is the <strong>Rollback Bar</strong>, a blue bar. If you drag it up, you can temporarily take the model back to <strong>an earlier point in its history</strong>.</p>



<p class="wp-block-paragraph">The features below the bar are rolled back (they appear grayed out), so the model shows only what was built up to that point.</p>



<p class="wp-block-paragraph">To go back to the present, drag the bar to the bottom again, or right-click a feature and choose <strong>Roll To End</strong>.</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_ttl"><div class="box_title"><span class="span__box_title">When Should You Use the Rollback Bar?</span></div><div class="cboxcomment">
<ul class="wp-block-list">
<li>A feature shows a yellow or red warning, but you cannot tell which change caused it.</li>



<li>You want to edit a feature in the middle of the tree, but you are afraid of breaking the features after it.</li>



<li>You want to check how the model was built.</li>
</ul>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">Debugging with the Rollback Bar has two benefits:</p>



<ol class="wp-block-list">
<li><strong>Isolating the error:</strong> Move the bar back to just <strong>before</strong> the feature that fails. The model then shows only what was built before the error, so you can check the earlier features one by one and find the cause.</li>



<li><strong>Editing safely:</strong> To edit a feature in the middle of the tree, move the bar to just after that feature. After you edit it, you can check right away whether the features that follow still work.</li>
</ol>



<p class="wp-block-paragraph">&nbsp;</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">Think of the Rollback Bar as a <strong>time machine</strong> for your model.</p>



<p class="wp-block-paragraph">When an error appears, go back in time, find the cause, fix it, and then return to the present.</p>
</div></div>



<h2 class="wp-block-heading">Summary</h2>



<p class="wp-block-paragraph">This article introduced three commands to try when an error appears.</p>



<p class="wp-block-paragraph">Together, they can make debugging and editing a model easier.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<figure class="wp-block-table"><table class="has-fixed-layout"><thead><tr><th>Command</th><th>What it helps with</th></tr></thead><tbody><tr><td><strong>Force Rebuild (Ctrl + Q)</strong></td><td>Inconsistent calculation results in the model</td></tr><tr><td><strong>SketchXpert</strong></td><td>Over defined sketches (conflicting relations and dimensions)</td></tr><tr><td><strong>Rollback Bar</strong></td><td>Failed features, and edits in the middle of the tree</td></tr></tbody></table></figure>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">If you get comfortable with these commands, you can work through errors and keep your models stable and clean.</p>



<p class="wp-block-paragraph">The next time you hit trouble, give these three a try!</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">Once you can deal with errors on your own, you are no longer held back by them, and you can edit with confidence.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">Thank you for reading to the end.</p>

]]></content:encoded>
					
					<wfw:commentRss>https://sugitama-lab.tech/en/solidworks-error-troubleshooting-commands/feed/</wfw:commentRss>
			<slash:comments>0</slash:comments>
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">3677</post-id>	</item>
		<item>
		<title>How to Use SOLIDWORKS Remotely: Free Tailscale VPN and Remote Desktop Setup</title>
		<link>https://sugitama-lab.tech/en/solidworks-remote-desktop-tailscale/</link>
					<comments>https://sugitama-lab.tech/en/solidworks-remote-desktop-tailscale/#respond</comments>
		
		<dc:creator><![CDATA[sugitama]]></dc:creator>
		<pubDate>Mon, 09 Nov 2026 22:41:50 +0000</pubDate>
				<category><![CDATA[Tips & Features]]></category>
		<category><![CDATA[for beginners]]></category>
		<category><![CDATA[intermediate & advanced]]></category>
		<category><![CDATA[makers]]></category>
		<category><![CDATA[remote work]]></category>
		<guid isPermaLink="false">https://sugitama-lab.tech/?p=3667</guid>

					<description><![CDATA[Take SOLIDWORKS anywhere without a mobile workstation: connect to your home PC with the free Tailscale VPN and Remote Desktop, and even power it on remotely.]]></description>
										<content:encoded><![CDATA[
<p class="wp-block-paragraph">For a designer who normally works at a desk in the office, working from a caf&eacute; is an appealing idea.</p>



<p class="wp-block-paragraph">But if you want to use SOLIDWORKS outside the office, there is a big obstacle.</p>



<p class="wp-block-paragraph">A PC that runs SOLIDWORKS smoothly is <strong>too heavy to carry around</strong>, and a <strong>mobile workstation is too expensive</strong>.</p>



<p class="wp-block-paragraph">There is, however, a way to <strong>keep using the desktop you already have at home, at a low cost and safely</strong>.</p>



<p class="wp-block-paragraph">This article explains how to carry SOLIDWORKS with you using a VPN app called <strong>Tailscale</strong> and <strong>Remote Desktop</strong> (the Remote Desktop Protocol, or RDP).</p>



<p class="wp-block-paragraph">With this setup, you can fix a drawing on a business trip, or do some hobby modeling from the living-room sofa.</p>



<p class="wp-block-paragraph">If you are interested in working from anywhere, please read on.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">A Third Option for Using SOLIDWORKS Away from Your Desk</h2>



<p class="wp-block-paragraph">There are three main ways to use SOLIDWORKS outside the office.</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_ttl"><div class="box_title"><span class="span__box_title">Three Ways to Take SOLIDWORKS with You</span></div><div class="cboxcomment">
<ol class="wp-block-list">
<li><strong>Carry a mobile workstation</strong><br>Pros: High performance anywhere, and no dependence on an internet connection.<br>Cons: The PC is heavy, expensive, and drains the battery quickly.</li>



<li><strong>Use a cloud-based 3D CAD (such as SOLIDWORKS xDesign)</strong><br>Pros: It runs in a browser, so an ordinary laptop is enough.<br>Cons: The usability and functions differ from the desktop version, and moving your existing data takes effort.</li>



<li><strong>Control your office or home workstation remotely (Remote Desktop)</strong><br>Pros: You keep using your familiar PC environment and data, and the PC you carry can be low-spec.<br>Cons: How comfortable it feels depends on the speed of your internet connection.</li>
</ol>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">This article covers the third option, using <strong>Remote Desktop (RDP)</strong>.</p>



<p class="wp-block-paragraph">From a lightweight laptop or tablet, you call up the screen of the high-performance workstation at home and operate it.</p>



<p class="wp-block-paragraph">That frees you from both the heavy luggage and the big expense.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">Tailscale: A Simple, Safe Way to Connect</h2>



<p class="wp-block-paragraph">RDP itself is a standard feature of Windows.</p>



<p class="wp-block-paragraph">However, exposing it directly to the internet is risky.</p>



<p class="wp-block-paragraph">To use RDP safely, you need to put proper security around it.</p>



<p class="wp-block-paragraph">Without it, an attacker may be able to steal your information or take over your PC and accounts.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">This is where a <strong>VPN (virtual private network)</strong> comes in.</p>



<p class="wp-block-paragraph">A VPN is a technology that builds your own private &quot;tunnel&quot; through the public internet.</p>



<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="1280" height="625" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/tailscale-vpn-tunnel-en.png" alt="Illustration of an encrypted tunnel carrying traffic from a laptop in a cafe to a home workstation, across the busy internet" class="wp-image-3663" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/tailscale-vpn-tunnel-en.png 1280w, https://sugitama-lab.tech/wp-content/uploads/2026/11/tailscale-vpn-tunnel-en-300x146.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/tailscale-vpn-tunnel-en-1024x500.png 1024w, https://sugitama-lab.tech/wp-content/uploads/2026/11/tailscale-vpn-tunnel-en-768x375.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/tailscale-vpn-tunnel-en-485x237.png 485w" sizes="auto, (max-width: 1280px) 100vw, 1280px" /></figure>



<p class="wp-block-paragraph">Until recently, building a safe VPN environment on your own was difficult.</p>



<ul class="wp-block-list stk-list-icon--bad">
<li>You had to buy a router that supports VPN.</li>



<li>You needed technical network settings such as &quot;port forwarding&quot; and &quot;DDNS&quot; (manual router and address settings that open your home network to the internet).</li>
</ul>



<p class="wp-block-paragraph">Other VPN products exist, but with <strong>Tailscale</strong>, which I recommend here, you can set up a VPN environment very easily.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_ttl"><div class="box_title"><span class="span__box_title">Three Reasons to Use Tailscale</span></div><div class="cboxcomment">
<ol class="wp-block-list">
<li><strong>No extra equipment</strong>:<br><strong>No expensive router is needed.</strong> You just install the software on the PCs you already have.</li>



<li><strong>No complicated setup</strong>:<br>Port forwarding and other <strong>difficult settings are not required</strong>. You just install it and log in.</li>



<li><strong>Free for personal use</strong>:<br>Tailscale&#8217;s Personal plan is <strong>free</strong>. For the current limits, see the <a href="https://tailscale.com/pricing" target="_blank" rel="noreferrer noopener"><strong>official pricing page</strong></a>.</li>
</ol>
</div></div>



<p class="wp-block-paragraph">With Tailscale, PCs in different places can quickly form a secure network, as if they were connected by a LAN cable in the same room.</p>



<p class="is-style-supplement-warning wp-block-paragraph"><strong>Before you start:</strong> The free Personal plan is meant for personal use. If you plan to connect a PC that belongs to your employer, check Tailscale&#8217;s terms and your company&#8217;s IT policy first. Also turn on two-step verification for the Google or Microsoft account you use to log in to Tailscale, because that account is the key to your private network.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">Step by Step: Build the Remote Environment with Tailscale</h2>



<p class="wp-block-paragraph">Now let&#8217;s build the environment.</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_ttl"><div class="box_title"><span class="span__box_title">What You Need (Important)</span></div><div class="cboxcomment">
<ul class="wp-block-list">
<li><strong>Host PC (the one you control remotely)</strong>: the workstation at home with SOLIDWORKS installed
<ul class="wp-block-list">
<li><strong>Very important: its edition of Windows must be Pro, Enterprise, or Education.</strong> Windows 10 reached the end of support on October 14, 2025, so Windows 11 Pro is the safer choice.</li>



<li>The Home edition does not include the Remote Desktop host feature, so such a PC cannot be controlled remotely. Check your edition under Settings &gt; System &gt; About.</li>



<li>If you have the Home edition, you need to upgrade to Pro through the Microsoft Store (paid).</li>
</ul>
</li>



<li><strong>Client PC (the one you operate from)</strong>: the laptop you carry
<ul class="wp-block-list">
<li>This can be anything: Windows Home, a Mac, an iPad, and so on.</li>
</ul>
</li>
</ul>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Step 1: Install Tailscale and Connect</h3>



<p class="wp-block-paragraph">Do the following on both the host PC and the client PC.</p>



<ol class="wp-block-list">
<li>Go to the <a href="https://tailscale.com/" target="_blank" rel="noreferrer noopener"><strong>official Tailscale website</strong></a>, then download and install the app. (On a Mac or iPad, you can also get it from the App Store.)</li>



<li>Start the app and log in with a Google or Microsoft account, for example.<br><strong>Use the same account on the host side and the client side.</strong></li>



<li>After you log in, the Tailscale <a href="https://login.tailscale.com/admin" target="_blank" rel="noreferrer noopener">admin console</a> shows the connected PCs. Note the Tailscale IP address of your host PC (it starts with 100.), because you will need it in Step 3.</li>



<li><strong>Disable key expiry for the host PC</strong> in the admin console. By default, each device has to sign in to Tailscale again about every 180 days, and connections stop working until it does. If that happens while you are away from home, you cannot fix it remotely. (See Tailscale&#8217;s <a href="https://tailscale.com/kb/1028/key-expiry" target="_blank" rel="noreferrer noopener">key expiry documentation</a>.)</li>



<li>On the host PC, also turn on <strong>Run unattended</strong> so that Tailscale keeps running even when nobody is signed in to Windows. I explain how in the note near the end of this article.</li>
</ol>



<p class="wp-block-paragraph">That is all it takes to open your own private tunnel.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Step 2: Set Up the Home Workstation (Host Side)</h3>



<p class="wp-block-paragraph">Set up the workstation at home so that it accepts remote operation.</p>



<p class="wp-block-paragraph"><strong>(This feature requires the Pro edition or higher.)</strong></p>



<ol class="wp-block-list">
<li>Open Windows <strong>Settings</strong> &rarr; <strong>System</strong> &rarr; <strong>Remote Desktop</strong>.</li>



<li>Turn on the <strong>Remote Desktop</strong> switch, and select Confirm if Windows asks.</li>



<li>While you are there, check the power settings (Settings &rarr; System &rarr; Power). If the PC goes to sleep, you cannot connect, so set it not to sleep while it is plugged in.</li>
</ol>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Step 3: Connect from the PC You Carry (Client Side)</h3>



<p class="wp-block-paragraph">Now it is time to connect.</p>



<ol class="wp-block-list">
<li>On the PC you carry, start <strong>Remote Desktop Connection</strong>. (It is a standard Windows app. On a Mac or iPhone/iPad, use Microsoft&#8217;s <strong>Windows App</strong> instead.)</li>



<li>In the &quot;Computer&quot; field, enter <strong>the Tailscale IP address of the home workstation (the number that starts with 100.) that you noted in Step 1</strong>, then click Connect. (On a Mac or iPad, install Tailscale and sign in with the same account first, then add the 100.x address as a new PC in Windows App.)</li>



<li>Enter the user name and password of the workstation at home. If you sign in to Windows with a Microsoft account, use that account&#8217;s email address and password, not a PIN. A Windows account without a password usually cannot be used for Remote Desktop.</li>



<li>If a certificate warning appears the first time (it says the identity of the remote computer cannot be verified), it is expected when you connect by IP address. If you are sure the address is your own PC&#8217;s, you can continue.</li>
</ol>



<p class="is-style-supplement-normal wp-block-paragraph">The 100.x address is assigned to the home workstation by Tailscale, and it stays the same even when the device switches networks, so you do not need to look it up every time.</p>



<p class="wp-block-paragraph">If the connection succeeds, the SOLIDWORKS screen of your home workstation should fill the screen of your laptop.</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_simple"><div class="box_title"><span class="span__box_title">Column: What If 3D Operation Feels Heavy?</span></div><div class="cboxcomment">
<p class="wp-block-paragraph">The standard Windows Remote Desktop (RDP) gives a clear picture, but it is not very good at heavy drawing, such as spinning a model around in SOLIDWORKS.</p>



<p class="wp-block-paragraph">If it feels choppy and hard to work with, try <strong>Parsec</strong>, a remote-access app made for gamers, instead of RDP.</p>



<p class="wp-block-paragraph">It is designed for <strong>low latency</strong>, so it may make 3D CAD operation feel smoother. Parsec is a separate tool with its own account and settings, so follow its own instructions to set it up. How well either tool performs depends on your PC and your connection, so try both.</p>



<p class="wp-block-paragraph">Parsec is <strong>free for personal, non-commercial use</strong>. According to <a href="https://parsec.app/pricing" target="_blank" rel="noreferrer noopener">Parsec&#8217;s pricing page</a>, commercial use requires a paid plan.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">The Physical Problem: How to Turn the PC On</h2>



<p class="wp-block-paragraph">The last big obstacle when building a remote-work environment is this.</p>



<p class="wp-block-paragraph">How do you press the power button of a PC in an empty house or office?</p>



<p class="wp-block-paragraph">You want to turn the PC on remotely, only when you need it. You can do that by combining a <strong>smart plug</strong> with a setting in the PC&#8217;s <strong>BIOS</strong> (the firmware setup screen that you can open before Windows starts).</p>



<p class="wp-block-paragraph">Once this is set up, your remote-work environment is complete.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">How It Works</h3>



<p class="wp-block-paragraph">Many desktop PCs have a function that <strong>starts the PC automatically when power returns after it has been cut, such as in a power outage</strong>. We use that function.</p>



<ol class="wp-block-list">
<li>Put a <strong>smart plug</strong> between the PC and the wall outlet.</li>



<li>From wherever you are, turn the smart plug <strong>ON</strong> with its smartphone app.</li>



<li>Power flows to the PC, the PC decides that power has been restored after an outage, and it <strong>starts up by itself</strong>.</li>
</ol>



<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="1280" height="720" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/smart-plug-remote-power-en.png" alt="Diagram: wall outlet, smart plug, and the PC power plug, with a phone switching the smart plug on remotely" class="wp-image-3664" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/smart-plug-remote-power-en.png 1280w, https://sugitama-lab.tech/wp-content/uploads/2026/11/smart-plug-remote-power-en-300x169.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/smart-plug-remote-power-en-1024x576.png 1024w, https://sugitama-lab.tech/wp-content/uploads/2026/11/smart-plug-remote-power-en-768x432.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/smart-plug-remote-power-en-485x273.png 485w" sizes="auto, (max-width: 1280px) 100vw, 1280px" /></figure>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">BIOS Settings</h3>



<p class="wp-block-paragraph">To use this function, you need to change a setting in the <strong>BIOS</strong> (also called UEFI) of the workstation. Check that your PC has this option before you buy a plug. It may be named differently, such as &quot;After Power Loss&quot; or &quot;AC Recovery.&quot;</p>



<ol class="wp-block-list">
<li>Turn on the PC and, while the maker&#8217;s logo is showing, press the <strong>F2</strong> or <strong>Delete</strong> key repeatedly to enter the BIOS screen. (The key differs by model and maker, so check the PC maker&#8217;s website for details.)</li>



<li>Look for a tab such as <strong>Power Management</strong>.</li>



<li>Find an item such as <strong>AC Power Loss Recovery</strong> or <strong>Restore on AC Power Loss</strong>, and change the setting to <strong>Power On</strong> (or <strong>Always On</strong> or <strong>Last State</strong>, depending on the PC).</li>



<li>Save the settings and exit the BIOS.</li>
</ol>



<p class="is-style-supplement-normal wp-block-paragraph">If your PC starts too fast to catch the key, on Windows 11 you can open the BIOS from Settings &rarr; System &rarr; Recovery &rarr; Advanced startup &rarr; Restart now, then Troubleshoot &rarr; Advanced options &rarr; UEFI Firmware Settings.</p>



<p class="wp-block-paragraph">Now you are ready. Turn the PC on from your phone, wait a few minutes, and connect with Remote Desktop over Tailscale. With this flow, you can start working anytime, anywhere.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_simple"><div class="box_title"><span class="span__box_title">Before You Leave: Test the Whole Chain</span></div><div class="cboxcomment">
<ol class="wp-block-list">
<li>Set up the smart plug following its maker&#8217;s instructions, and make sure you can switch it from your phone <strong>using mobile data</strong>, not only your home Wi-Fi.</li>



<li>Shut down the PC, turn the plug off, then turn it on from your phone and confirm that the PC starts by itself.</li>



<li>From another PC or network, connect with Remote Desktop over Tailscale, and check that it also works after the PC has restarted without anyone signing in.</li>
</ol>
</div></div>



<p class="wp-block-paragraph">All of these steps need physical access to the home PC, so do them while you are still at home.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">A Smart Plug Also Helps with Security</h3>



<p class="wp-block-paragraph">Physically cutting the power to the PC with a smart plug is also a good security measure.</p>



<p class="wp-block-paragraph">A PC that is always connected to the internet and waiting in sleep mode can never be made completely risk-free, however well you defend it with a VPN.</p>



<p class="wp-block-paragraph">But if you turn off the power at the source with the smart plug, <strong>nobody can reach the PC from outside while it is off</strong>.</p>



<p class="wp-block-paragraph">To protect confidential data, I think that cutting the power when you are not using the PC is <strong>a very simple and very safe way</strong> to operate it.</p>



<p class="wp-block-paragraph">Note that the smart plug itself is controlled through an app account, so protect that account with a strong password and two-step verification too.</p>



<p class="is-style-supplement-warning wp-block-paragraph"><strong>Tip:</strong> When you finish working, always <strong>shut down</strong> from the Windows Start menu. Turn the smart plug OFF only after the PC has finished shutting down completely.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">How to Choose a Smart Plug</h3>



<p class="wp-block-paragraph">Many smart plugs are on sale, but there are two things to check when you use one with a high-spec PC such as a workstation.</p>



<ol class="wp-block-list">
<li><strong>Its rating must be clearly higher than what the PC needs.</strong> Check the input rating (amps or watts) on the label of the PC&#8217;s power supply, and choose a plug whose rated current and wattage are clearly above it for your local mains voltage. A plug rated too low may cut out or overheat when the PC starts up or runs under heavy load. Choose a plug that carries a safety certification recognized in your country.</li>



<li><strong>It should show power consumption (wattage).</strong> When you turn the plug on from a distance, watching the reading in the app rise from 0 W to something like 80 W tells you the PC has started.</li>
</ol>



<p class="wp-block-paragraph">&nbsp;</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_simple"><div class="box_title"><span class="span__box_title">Note: Starting the PC with a Smart Plug</span></div><div class="cboxcomment">
<p class="wp-block-paragraph">If the PC may restart or be powered on while nobody is signed in to Windows (for example, when you start it remotely with a smart plug, or after a Windows update restart), you need to set Tailscale to <strong>&quot;Run unattended.&quot;</strong></p>



<p class="wp-block-paragraph">With the default settings, Tailscale starts in the background when you sign in to Windows.</p>



<p class="wp-block-paragraph">So when the PC has only just been powered on, Tailscale is not running yet, and a Remote Desktop connection fails because the PC cannot be found.</p>



<p class="wp-block-paragraph">With &quot;Run unattended&quot; enabled, Tailscale keeps running in the background even before sign-in, so you can connect with Remote Desktop from the Windows sign-in screen.</p>



<p class="wp-block-paragraph">Right-click the Tailscale icon in the system tray (it may be hidden under the ^ arrow), point to <strong>Preferences</strong>, select <strong>Run unattended</strong>, and select Yes when the app asks. A check mark appears next to the item when it is on.</p>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="652" height="398" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/tailscale-run-unattended.png" alt="The Tailscale tray menu in Windows with Preferences open and Run unattended checked" class="wp-image-3665" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/tailscale-run-unattended.png 652w, https://sugitama-lab.tech/wp-content/uploads/2026/11/tailscale-run-unattended-300x183.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/tailscale-run-unattended-485x296.png 485w" sizes="auto, (max-width: 652px) 100vw, 652px" /></figure>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">Summary</h2>



<p class="wp-block-paragraph">This article explained how to use SOLIDWORKS while working remotely, getting the most out of the high-performance environment you already own, without buying an expensive mobile workstation.</p>



<p class="wp-block-paragraph">The main extra item you need is a <strong>smart plug</strong>, which you use to turn the PC on remotely.</p>



<p class="wp-block-paragraph">If your PC at home runs the Home edition, you also need to pay for the upgrade to Pro, but the total cost should still be much lower than that of a mobile workstation.</p>



<p class="wp-block-paragraph"><strong>Tailscale</strong>, the core of the network, is free to try.</p>



<p class="wp-block-paragraph">Why not start by installing Tailscale this weekend? Your options for how you work could widen a lot.</p>



<p class="wp-block-paragraph">Thank you for reading to the end.</p>

]]></content:encoded>
					
					<wfw:commentRss>https://sugitama-lab.tech/en/solidworks-remote-desktop-tailscale/feed/</wfw:commentRss>
			<slash:comments>0</slash:comments>
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">3667</post-id>	</item>
		<item>
		<title>eDrawings Free Viewer: How to Install and Use It to Open SOLIDWORKS Files</title>
		<link>https://sugitama-lab.tech/en/edrawings-free-viewer/</link>
					<comments>https://sugitama-lab.tech/en/edrawings-free-viewer/#respond</comments>
		
		<dc:creator><![CDATA[sugitama]]></dc:creator>
		<pubDate>Fri, 06 Nov 2026 06:43:07 +0000</pubDate>
				<category><![CDATA[Tips & Features]]></category>
		<category><![CDATA[AR]]></category>
		<category><![CDATA[review]]></category>
		<category><![CDATA[sharing]]></category>
		<category><![CDATA[VR]]></category>
		<guid isPermaLink="false">https://sugitama-lab.tech/?p=3631</guid>

					<description><![CDATA[What the free eDrawings Viewer can and can't do, how to install it, and the basic steps for viewing, measuring, and marking up SOLIDWORKS models.]]></description>
										<content:encoded><![CDATA[
<p class="wp-block-paragraph">&#8220;I&#8217;ve heard of eDrawings, but what can it actually do?&#8221;</p>



<p class="wp-block-paragraph">&#8220;Can I really view 3D data for free, even without SOLIDWORKS?&#8221;</p>



<p class="wp-block-paragraph">Sound familiar?</p>



<p class="wp-block-paragraph">eDrawings is a viewer app that lets you view 3D models and drawings created in SOLIDWORKS for free.</p>



<p class="wp-block-paragraph">You don&#8217;t need a SOLIDWORKS license. Anyone can download it and start using it right away.</p>



<p class="wp-block-paragraph">If you want to install it right now, you can get it for free from the <a href="https://www.edrawingsviewer.com/download-edrawings"><strong>official download page</strong></a>. The steps are explained in &#8220;<a href="#install"><strong>How to Install eDrawings</strong></a>.&#8221;</p>



<p class="wp-block-paragraph">This article explains eDrawings in a way that is easy for beginners to follow: the basics, what the free version can and can&#8217;t do, how to install it, basic operations, and what to do when a file won&#8217;t open.</p>



<p class="wp-block-paragraph">It is also useful if you check SOLIDWORKS data in a role outside design, such as assembly, manufacturing, inspection, or sales.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray width_full l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">I can&#8217;t count how many times people on the shop floor have told me, &#8220;I can&#8217;t open this data&#8230;&#8221; Every time, eDrawings is what I recommend. If you read this article, I might finally stop getting asked (haha).</p>
</div></div>



<h2 class="wp-block-heading">The Short Answer: What the Free Version of eDrawings Can Do</h2>



<p class="wp-block-paragraph">The free version of eDrawings (Viewer) lets you do the following.</p>



<ul class="wp-block-list">
<li>View SOLIDWORKS files (.SLDPRT/.SLDASM/.SLDDRW), eDrawings files (.eDRW/.ePRT/.eASM), and DWG/DXF files</li>



<li>Rotate, pan, and zoom 3D models</li>



<li>Play assembly animations</li>



<li>Section views, measuring, and markup (annotating) (desktop version)</li>
</ul>



<p class="wp-block-paragraph">According to the official feature comparison table, section views, measuring, and markup are also included in the desktop version of eDrawings Viewer (the free version).</p>



<p class="wp-block-paragraph">eDrawings can also open many other formats, such as STEP, IGES, STL, and OBJ, according to the official help&#8217;s list of supported file types (some formats, such as STL and OBJ, have limited functionality).</p>



<p class="wp-block-paragraph">I recommend first checking how much of what you need the free version covers, and then considering Professional if you need more.</p>



<p class="wp-block-paragraph">The detailed differences are explained in the comparison table below.</p>



<h2 class="wp-block-heading">What Is eDrawings? A Free 3D Viewer Especially for Non-Designers</h2>



<p class="wp-block-paragraph">eDrawings is a free viewer app that lets you look at 3D models and drawings created in SOLIDWORKS.</p>



<p class="wp-block-paragraph">Even people who don&#8217;t have SOLIDWORKS can open and check files freely.</p>



<h3 class="wp-block-heading">Why eDrawings Helps Even If You&#8217;re Not a Designer</h3>



<p class="wp-block-paragraph">People who work on the shop floor benefit a lot from being able to view design data directly.</p>



<figure class="wp-block-table"><table><thead><tr><th>Your role</th><th>What eDrawings solves</th></tr></thead><tbody><tr><td>Assembly / manufacturing</td><td>Check how parts overlap and the order of assembly in a 3D model, which is hard to picture from paper drawings. This can reduce assembly mistakes</td></tr><tr><td>Inspection / quality control</td><td>Measure dimensions on the 3D model (possible even in the free desktop version). This makes it easier to compare the design with the actual part</td></tr><tr><td>Sales / customer support</td><td>Show a product&#8217;s 3D model on a tablet on the spot and convey the product&#8217;s appeal intuitively</td></tr></tbody></table></figure>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">

<p class="wp-block-paragraph">Sales and inspection people often tell me, &#8220;I can&#8217;t picture the real part from a drawing alone.&#8221; Just being able to spin it around in 3D makes a big difference in how well it gets across.</p>

</div></div>



<h3 class="wp-block-heading">What Kinds of Files Can You View?</h3>



<p class="wp-block-paragraph">The main file formats you can open with eDrawings are as follows.</p>



<ul class="wp-block-list">
<li>SOLIDWORKS files (.SLDPRT, .SLDASM, .SLDDRW)</li>



<li>2D CAD files (.DWG, .DXF)</li>



<li>eDrawings files (.eDRW, .ePRT, .eASM)</li>



<li>Other formats listed in the official help, such as STEP, IGES, STL, OBJ, and files from other CAD systems</li>
</ul>



<p class="wp-block-paragraph">eDrawings files are lightweight, so they are easy to send by email and run smoothly even on a smartphone.</p>



<h2 class="wp-block-heading">Comparison Table: Free vs. Professional vs. Mobile</h2>



<p class="wp-block-paragraph">eDrawings comes in three types: the free version (Viewer), the paid Professional version, and the mobile version (smartphones and tablets). The available features differ.</p>



<p class="wp-block-paragraph">This is worth checking before you install.</p>



<figure class="wp-block-table"><table><thead><tr><th>Feature</th><th>Free (Viewer)</th><th>Professional</th><th>Mobile</th></tr></thead><tbody><tr><td>Rotate, pan, and zoom 3D models</td><td>Yes</td><td>Yes</td><td>Yes</td></tr><tr><td>Play animations</td><td>Yes</td><td>Yes</td><td>Yes</td></tr><tr><td>Section view (Dynamic Cross Sectioning)</td><td>Yes (desktop)</td><td>Yes</td><td>Yes (Professional mobile app)</td></tr><tr><td>Measuring (Measure Tool)</td><td>Yes (desktop)</td><td>Yes</td><td>Yes (Professional mobile app)</td></tr><tr><td>Markup (Markup Tool)</td><td>Yes (desktop)</td><td>Yes</td><td>Yes (Professional mobile app)</td></tr><tr><td>Save as web HTML</td><td>No</td><td>Yes</td><td>N/A</td></tr><tr><td>AR (augmented reality) display</td><td>N/A (not supported on desktop)</td><td>N/A (not supported on desktop)</td><td>Yes</td></tr><tr><td>Price</td><td>Free</td><td>Included with SOLIDWORKS Professional (not sold separately)</td><td>Please check the App Store or Google Play for the latest price</td></tr></tbody></table></figure>



<p class="wp-block-paragraph">Section view, measuring, and markup can be used in the free version (Viewer) on the desktop. On smartphones and tablets, the official feature comparison table lists them only for the Professional mobile app.</p>



<p class="wp-block-paragraph">It&#8217;s reassuring to run through this table once and check whether the free version alone is enough for you.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray width_full l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">Among the people I work with, assembly, inspection, and sales staff almost always find the free version is enough. Section view and measuring also work in the free desktop version, so try it first. Consider Professional only when you find you need something the free version lacks, such as saving as web HTML.</p>
</div></div>



<h2 id="install" class="wp-block-heading">How to Install eDrawings</h2>



<h3 class="wp-block-heading">Installing on a Computer (Windows/Mac)</h3>



<p class="wp-block-paragraph"><strong>Step 1: Go to the official site</strong></p>



<p class="wp-block-paragraph">Open the official eDrawings download page.</p>



<p class="wp-block-paragraph">URL: <a href="https://www.edrawingsviewer.com/download-edrawings">https://www.edrawingsviewer.com/download-edrawings</a></p>



<p class="wp-block-paragraph"><strong>Step 2: Download the app</strong></p>



<p class="wp-block-paragraph">In the &#8220;eDrawings Viewer&#8221; section, click &#8220;Win Users&#8221; for Windows. On a Mac, click &#8220;Mac Users.&#8221;</p>



<p class="wp-block-paragraph">Follow the instructions that appear to continue the download.</p>



<p class="wp-block-paragraph"><strong>Step 3: Launch the installer</strong></p>



<p class="wp-block-paragraph">Open the downloaded file to launch the installer.</p>



<p class="wp-block-paragraph">Basically, you just follow the on-screen instructions and click &#8220;Next&#8221; and &#8220;I Agree.&#8221; There are no difficult settings.</p>



<p class="wp-block-paragraph"><strong>Step 4: Launch eDrawings</strong></p>



<p class="wp-block-paragraph">After the installation finishes, the eDrawings icon appears on your desktop and in the Start menu.</p>



<p class="wp-block-paragraph">Click the icon to launch it, and you&#8217;re ready.</p>



<p class="wp-block-paragraph">Also, the specs of your computer matter for running eDrawings comfortably.</p>



<p class="wp-block-paragraph">If it runs slowly or freezes, it&#8217;s also worth checking the recommended PC specs for SOLIDWORKS.</p>



<h3 class="wp-block-heading">Installing on a Smartphone or Tablet (iOS/Android)</h3>



<p class="wp-block-paragraph">On smartphones and tablets, eDrawings comes in a Viewer version and a Professional version.</p>



<p class="wp-block-paragraph">Section view, measuring, and markup are available in the Professional mobile app.</p>



<p class="wp-block-paragraph">Note: Prices may change, so please be sure to check the latest price on the App Store or Google Play.</p>



<ol class="wp-block-list">
<li>Open the app store: the App Store on iPhone/iPad, or Google Play on Android</li>



<li>Type &#8220;eDrawings&#8221; in the search box and search</li>



<li>Tap the &#8220;Get&#8221; or &#8220;Install&#8221; button</li>
</ol>



<h3 class="wp-block-heading">Launch It and Open a File</h3>



<p class="wp-block-paragraph">After launching eDrawings, double-click an eDrawings file (such as .eDRW or .ePRT) sent by a designer, or choose File &gt; Open in the app, and the 3D model appears.</p>



<p class="wp-block-paragraph">SOLIDWORKS native files (such as .SLDPRT) can also be opened in eDrawings as they are.</p>



<h2 class="wp-block-heading">Benefits of eDrawings for Non-Designers</h2>



<h3 class="wp-block-heading">Benefit 1: Fewer Misunderstandings on the Assembly and Manufacturing Floor</h3>



<p class="wp-block-paragraph"><strong>Checking in 3D means fewer mistakes</strong></p>



<p class="wp-block-paragraph">You can zoom in on a 3D model from any angle you like.</p>



<p class="wp-block-paragraph">How parts overlap and where bolt holes sit relative to each other become obvious at a glance. Questions like &#8220;which way does this part go on?&#8221; are answered on the spot, which can reduce assembly mistakes.</p>



<p class="wp-block-paragraph"><strong>Section view lets you check the internal structure (desktop version)</strong></p>



<p class="wp-block-paragraph">With the &#8220;Section&#8221; feature, you can cut through the model and check internal structures that are normally hidden.</p>



<p class="wp-block-paragraph">You can accurately understand things you could only imagine from paper drawings, such as how wiring and pipes are routed.</p>



<h3 class="wp-block-heading">Benefit 2: Smoother Communication with the Design Department</h3>



<p class="wp-block-paragraph"><strong>Point out exactly &#8220;this spot&#8221; (desktop version)</strong></p>



<p class="wp-block-paragraph">eDrawings has a &#8220;Markup&#8221; (annotation) feature.</p>



<p class="wp-block-paragraph">You can write questions such as &#8220;I think this hole&#8217;s diameter differs from the drawing&#8221; or &#8220;these parts interfere here and won&#8217;t assemble&#8221; directly at the relevant spot on the 3D model and send it back to the designer.</p>



<p class="wp-block-paragraph"><strong>No need for long explanations by phone or email</strong></p>



<p class="wp-block-paragraph">With a marked-up 3D model, the designer can quickly identify the problem spot, which helps reduce rework.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray width_full l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">The &#8220;he said, she said&#8221; mix-ups are quietly stressful, aren&#8217;t they? When someone marks up the 3D model directly, I understand the situation in one go, and it really helps.</p>
</div></div>



<h3 class="wp-block-heading">Benefit 3: No Need to Carry Heavy Materials or Prototypes</h3>



<p class="wp-block-paragraph"><strong>Your smartphone or tablet becomes a portable, interactive catalog</strong></p>



<p class="wp-block-paragraph">With the mobile app, you can show customers a product&#8217;s 3D model on a single tablet, without carrying a heavy prototype or a thick catalog.</p>



<p class="wp-block-paragraph">Rotating the model or showing it taken apart right in front of the customer makes the product&#8217;s appeal easier to convey.</p>



<p class="wp-block-paragraph"><strong>Light data makes sharing easy</strong></p>



<p class="wp-block-paragraph">eDrawings files are typically smaller than the original SOLIDWORKS files.</p>



<p class="wp-block-paragraph">You can easily attach them to email or share them via the cloud.</p>



<h3 class="wp-block-heading">Benefit 4: Check the Installation Layout on the Spot with AR (Mobile Version)</h3>



<p class="wp-block-paragraph">Through the camera of your smartphone or tablet, you can overlay a 3D model on a real space.</p>



<p class="wp-block-paragraph">For example, when bringing a new fixture onto a production line, you can check on the spot how it would sit, such as &#8220;how much workspace would be left if we put this fixture here?&#8221;</p>



<h2 class="wp-block-heading">Basic eDrawings Operations</h2>



<h3 class="wp-block-heading">Basic Operation 1: Move the 3D Model Freely</h3>



<figure class="wp-block-table"><table><thead><tr><th>Operation</th><th>How to do it</th><th>Use case</th></tr></thead><tbody><tr><td>Rotate (orbit)</td><td>Drag while holding the left mouse button</td><td>Checking interference from behind a part or from a specific angle</td></tr><tr><td>Move (pan)</td><td>Drag while holding the right mouse button</td><td>Moving a part that runs off the screen to the center</td></tr><tr><td>Zoom in and out</td><td>Turn the mouse wheel</td><td>Checking the shape of small holes and fillets</td></tr></tbody></table></figure>



<p class="wp-block-paragraph">On a smartphone or tablet, you can rotate with one finger, pan with two fingers, and zoom in and out by pinching with two fingers.</p>



<h3 class="wp-block-heading">Basic Operation 2: View a Section to Check the Internal Structure (Desktop Version)</h3>



<ol class="wp-block-list">
<li>Click the &#8220;Section&#8221; button (an icon that looks like a utility knife) on the toolbar at the top of the screen</li>



<li>Click the face where you want to show the section (for example, a side face of the model)</li>



<li>Drag the arrow that appears to adjust the position of the section</li>
</ol>



<p class="wp-block-paragraph">Ways to use section views include the following.</p>



<ul class="wp-block-list">
<li>Checking wiring and piping routes: if they are modeled, you can check whether cables and pipes inside an enclosure interfere with other parts</li>



<li>Checking welded areas: if the model includes them, you can check in advance the shape of parts that will be hidden by welding or bonding</li>
</ul>



<h3 class="wp-block-heading">Basic Operation 3: Measure Dimensions with the Measure Tool (Desktop Version)</h3>



<ol class="wp-block-list">
<li>Click the &#8220;Measure&#8221; button (an icon that looks like a ruler) on the toolbar</li>



<li>Click the points, lines, or faces you want to measure, one after another</li>



<li>The distance, angle, area, and so on between the clicked elements appear in a corner of the screen</li>
</ol>



<p class="wp-block-paragraph">Note: Section view, measuring, and markup can be used in the free version (Viewer) on the desktop. On a smartphone or tablet, they are available in the Professional mobile app.</p>



<h3 class="wp-block-heading">Basic Operation 4: Check Motion with Animation</h3>



<p class="wp-block-paragraph">Click the &#8220;Play&#8221; button (the ▶ icon) at the bottom of the screen, and you can watch the model automatically come apart or move as it was designed.</p>



<p class="wp-block-paragraph">Ways to use animation include the following.</p>



<ul class="wp-block-list">
<li>Previewing assembly steps: before assembling a complex machine, you can watch the disassembly animation and learn the steps in advance</li>



<li>Understanding how a product works: useful for sales staff when explaining a product&#8217;s movement to customers</li>
</ul>



<h2 class="wp-block-heading">Advanced: How to Send Feedback to the Designer with Markup (Desktop Version)</h2>



<p class="wp-block-paragraph">When you want to ask about a design, you can use eDrawings&#8217; &#8220;Markup&#8221; feature to write your question directly on the 3D model and send it back to the designer.</p>



<h3 class="wp-block-heading">How to Use the Markup Feature</h3>



<p class="wp-block-paragraph"><strong>Step 1: Enter markup mode</strong></p>



<p class="wp-block-paragraph">Click the &#8220;Markup&#8221; button (a pen icon) on the toolbar, and markup tools such as &#8220;Freehand,&#8221; &#8220;Text,&#8221; and &#8220;Dimension&#8221; appear, for example on the right side of the screen.</p>



<p class="wp-block-paragraph"><strong>Step 2: Point out the problem spot</strong></p>



<figure class="wp-block-table"><table><thead><tr><th>Tool</th><th>How to use it</th><th>Use case</th></tr></thead><tbody><tr><td>Freehand</td><td>Draw lines with the mouse, for example circling the problem spot in red so it stands out</td><td>Intuitive comments such as &#8220;I think this corner needs a bigger radius (R)&#8221;</td></tr><tr><td>Text</td><td>Click anywhere on the 3D model and type a comment</td><td>Specific instructions such as &#8220;please check the tolerance of this hole&#8221;</td></tr><tr><td>Dimension</td><td>Click the points or lines you want to measure and write in the dimension</td><td>Questions about dimensions such as &#8220;this distance differs from the drawing&#8221;</td></tr></tbody></table></figure>



<p class="wp-block-paragraph"><strong>Step 3: Save the view</strong></p>



<p class="wp-block-paragraph">Click the &#8220;Add View&#8221; button on the markup toolbar, and your markup is saved together with the angle of the 3D model at that moment.</p>



<p class="wp-block-paragraph">Important: markups can become invisible when you change the angle of the model. Be sure to save the view at the angle where your point is clearest.</p>



<p class="wp-block-paragraph"><strong>Step 4: Send the file back to the designer</strong></p>



<ol class="wp-block-list">
<li>Choose File &gt; &#8220;Save As&#8221;</li>



<li>Keep the file type as an eDrawings file (.eDRW, .ePRT, or .eASM, depending on the original file)</li>



<li>Send the saved file back to the designer by email or similar, and you&#8217;re done</li>
</ol>



<p class="wp-block-paragraph">The designer can open the eDrawings file they receive and check your markup just by clicking the saved view.</p>



<h2 class="wp-block-heading">What to Do When a File Won&#8217;t Open</h2>



<p class="wp-block-paragraph">eDrawings supports many file formats, but sometimes you may run into the problem that &#8220;the file won&#8217;t open.&#8221;</p>



<p class="wp-block-paragraph">Here are the common causes and fixes.</p>



<figure class="wp-block-table"><table><thead><tr><th>Cause of the problem</th><th>What to do</th></tr></thead><tbody><tr><td>The file was created in a CAD version newer than eDrawings supports</td><td>The official help lists the supported versions for each file type (for example, DXF/DWG files up to AutoCAD 2018). Ask the designer to send a SOLIDWORKS file or an eDrawings file instead</td></tr><tr><td>The file format isn&#8217;t supported at all</td><td>eDrawings doesn&#8217;t support every CAD file. Ask the designer to send a SOLIDWORKS file or an eDrawings file (such as .eDRW)</td></tr><tr><td>Your eDrawings version is old</td><td>If the designer created the file with the latest eDrawings, an older eDrawings on your side may not be able to open it. When you hear &#8220;the file won&#8217;t open,&#8221; first try updating eDrawings to the latest version</td></tr></tbody></table></figure>



<p class="wp-block-paragraph">When a file won&#8217;t open, first check whether the file format and its version are within the supported range listed in the official help.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray width_full l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">I often get panicked messages saying &#8220;It won&#8217;t open!&#8221; Stay calm and use this table to narrow down the cause.</p>
</div></div>



<h2 class="wp-block-heading">Advanced Features to Get More Out of eDrawings</h2>



<h3 class="wp-block-heading">Advanced Feature 1: Show a Model on Site with AR (Mobile Version Only)</h3>



<ol class="wp-block-list">
<li>Open a 3D model in the mobile version of eDrawings</li>



<li>Tap the &#8220;AR&#8221; button at the bottom of the screen</li>



<li>The camera starts, so point it at the real space (such as a workbench or an installation spot)</li>



<li>The open 3D model appears in the space in front of you</li>
</ol>



<p class="wp-block-paragraph">Ways to use AR include the following.</p>



<ul class="wp-block-list">
<li>Installation simulation: before bringing in a new machine or fixture, you can check on the spot whether &#8220;it would get in the way if we put it here&#8221;</li>



<li>Checking the sense of size: when conveying a product&#8217;s size to a customer, you can give a more accurate and impactful explanation than with a catalog or drawing</li>
</ul>



<h3 class="wp-block-heading">Advanced Feature 2: Share with Anyone Easily as HTML (Professional Version)</h3>



<p class="wp-block-paragraph">If you want people who don&#8217;t have the eDrawings app to see a 3D model too, you can ask for it to be exported as HTML.</p>



<ul class="wp-block-list">
<li>Ask the designer: a designer who uses eDrawings Professional can save the 3D model as a web HTML file that opens in a web browser</li>



<li>No app needed on the receiving end: without installing any special app, you can rotate and zoom the 3D model in a web browser such as Chrome or Edge</li>
</ul>



<p class="wp-block-paragraph">Examples of how to use HTML output include sharing with outside partner companies (you can easily provide 3D information even to companies that find it hard to install apps for security reasons) and embedding in documents (placing a link to the 3D model in a report or manual makes the document easier to understand).</p>



<p class="wp-block-paragraph">To create one in eDrawings Professional, choose File &gt; Save As and set the file type to web HTML.</p>



<h2 class="wp-block-heading">Things to Keep in Mind When Using eDrawings</h2>



<p class="wp-block-paragraph">eDrawings is, after all, a &#8220;viewer&#8221; (software for looking at things).</p>



<p class="wp-block-paragraph">You can&#8217;t change the shape of a model, rewrite dimensions, or delete parts.</p>



<p class="wp-block-paragraph">If you want a part of the design changed, use the markup feature to write your point and be sure to give the feedback to the designer.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray width_full l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">Now and then someone asks me to &#8220;just fix it directly in eDrawings,&#8221; but that&#8217;s not possible (haha). Please remember it as a tool for looking and communicating.</p>
</div></div>



<h2 class="wp-block-heading">Summary</h2>



<p class="wp-block-paragraph">This article covered what the free version of eDrawings can do, how to install it, basic operations, and what to do when a file won&#8217;t open.</p>



<p class="wp-block-paragraph">eDrawings is more than just a &#8220;free viewer.&#8221;</p>



<p class="wp-block-paragraph">It is a handy tool that solves the problem of &#8220;I can&#8217;t read the design data&#8221; and closes the gap between designers and the shop floor.</p>



<ul class="wp-block-list">
<li>On the assembly floor: checking assembly steps in a 3D model can help reduce assembly mistakes and save time</li>



<li>In sales: showing a 3D model on a tablet makes explanations to customers easier to follow</li>



<li>In any department: giving accurate feedback with the markup feature can reduce back-and-forth and errors for designers, and help speed up product development</li>
</ul>



<h3 class="wp-block-heading">Next Steps</h3>



<ol class="wp-block-list">
<li>First, install the free version</li>



<li>Ask a designer to send you an &#8220;eDrawings file&#8221;</li>



<li>Try how far the free version takes you, and consider Professional if you need it</li>
</ol>



<p class="wp-block-paragraph">Let&#8217;s make the most of eDrawings and turn &#8220;we&#8217;re stuck&#8221; into &#8220;it&#8217;s done.&#8221;</p>



<p class="wp-block-paragraph">Thank you for reading to the end.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray width_full l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">If you have an example of how you use it at your workplace, please tell me in the comments. I&#8217;m looking forward to it.</p>
</div></div>

]]></content:encoded>
					
					<wfw:commentRss>https://sugitama-lab.tech/en/edrawings-free-viewer/feed/</wfw:commentRss>
			<slash:comments>0</slash:comments>
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">3631</post-id>	</item>
		<item>
		<title>SOLIDWORKS Sketch Constraints: The One Idea That Prevents Design Mistakes</title>
		<link>https://sugitama-lab.tech/en/solidworks-sketch-constraints/</link>
					<comments>https://sugitama-lab.tech/en/solidworks-sketch-constraints/#respond</comments>
		
		<dc:creator><![CDATA[sugitama]]></dc:creator>
		<pubDate>Fri, 06 Nov 2026 05:48:00 +0000</pubDate>
				<category><![CDATA[Tips & Features]]></category>
		<category><![CDATA[mistake prevention]]></category>
		<category><![CDATA[operation skills]]></category>
		<guid isPermaLink="false">https://sugitama-lab.tech/?p=3624</guid>

					<description><![CDATA[Learn the basics of sketch constraints in SOLIDWORKS and the one design-intent idea that keeps your models from breaking when dimensions change.]]></description>
										<content:encoded><![CDATA[
<p class="wp-block-paragraph">Have you ever run into this when you adapt an existing design in SOLIDWORKS?</p>



<div class="wp-block-stk-plugin-cbox-notitle cbox is-style-glay_box type_normal"><div class="cboxcomment">
<ul class="wp-block-list">
<li>You change a shape or dimension slightly, and <strong>the whole model falls apart</strong>.</li>



<li>You change a shape or dimension slightly, and it turns into an <strong>unintended shape</strong>.</li>



<li>You change a shape or dimension slightly, and <strong>errors appear everywhere</strong>.</li>
</ul>
</div></div>



<p class="wp-block-paragraph">In fact, the cause of many of these problems is <strong>sketch constraints</strong>.</p>



<p class="wp-block-paragraph">The sketch is the foundation of a 3D shape.</p>



<p class="wp-block-paragraph">If your understanding of sketches is vague, you end up with a <strong><span class="pre--maker span-stk-maker-blue">&#8220;fragile model&#8221;</span></strong> that cannot handle design changes, no matter how carefully you model.</p>



<p class="wp-block-paragraph">If you build up features without understanding sketch constraints, even a small dimension change can make the entire model fall apart.</p>



<p class="wp-block-paragraph">When that happens, <strong>you spend a lot of time and effort fixing the model</strong>.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">I believe the cause of fragile models is a missing perspective: <strong>&#8220;communicating your design intent to SOLIDWORKS.&#8221;</strong></p>



<p class="wp-block-paragraph">This is hard to pick up just by learning the operations in a tutorial.</p>



<p class="wp-block-paragraph">I&#8217;m a mechanical engineer who uses SOLIDWORKS every day and holds the Certified SOLIDWORKS Professional (CSWP) certification. In this article, I explain <strong>&#8220;the basics of sketch constraints&#8221;</strong> that even beginners can put into practice right away, and <strong>&#8220;the one idea that reduces design mistakes.&#8221;</strong></p>



<p class="wp-block-paragraph">By reading this article, you will gain more than just operating skills: <strong>a way of thinking that helps you build models that are resilient to design changes and easy to reuse</strong>.</p>



<p class="wp-block-paragraph">Once you can build a <strong>&#8220;robust model&#8221;</strong> that doesn&#8217;t break easily, you can dramatically cut the time and effort you spend on dimension and shape changes.</p>



<p class="wp-block-paragraph">If your dimension changes never seem to go smoothly, this article is for you.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">Let&#8217;s level up as designers together. It starts with how you build a single sketch.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">What Are Sketch Constraints? Basics for Beginners</h2>



<p class="wp-block-paragraph">In SOLIDWORKS, sketch constraints are rules that fix the position, shape, and relationships of sketch entities (lines, circles, points, and so on).</p>



<p class="wp-block-paragraph">In SOLIDWORKS, geometric constraints are called <strong>relations</strong> and dimensional constraints are simply <strong>dimensions</strong>. This article uses &#8220;constraints&#8221; for both.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Understanding Constraint Status</h3>



<p class="wp-block-paragraph">You can tell whether a sketch entity is completely fixed by the color of its line.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_simple"><div class="box_title"><span class="span__box_title">Sketch constraint status</span></div><div class="cboxcomment">
<ul class="wp-block-list">
<li><strong>Fully Defined</strong>: All degrees of freedom are constrained and the entity cannot move. It is displayed in <strong>black</strong>.</li>



<li class="has-stk-palette-nine-color has-text-color has-link-color wp-elements-1"><strong>Under Defined</strong>: Degrees of freedom remain, so the entity may move unexpectedly when you drag it with the mouse. It is displayed in <strong>blue</strong>.</li>
</ul>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">In a sketch, <strong>aim to make every line and point you draw Fully Defined</strong>.</p>



<p class="wp-block-paragraph">If Under Defined entities remain, the sketch may look fixed at first glance, but when you later change a dimension or add another feature, the shape can change in unexpected directions and lead to design mistakes.</p>



<p class="wp-block-paragraph">Judge whether a sketch is finished by checking that <strong>all of the sketch entities are black</strong>, not by how the shape looks.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">You can also spot an Under Defined sketch in the FeatureManager design tree. If Under Defined sketch entities remain, a <strong>(-)</strong> mark appears before the sketch name.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">The Two Types of Constraints and Their Roles</h3>



<p class="wp-block-paragraph">To fully define a sketch, you add constraints to the sketch entities.</p>



<p class="wp-block-paragraph">Constraints fall into the following two broad types.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<figure class="wp-block-table is-style-stk-table-border stk-table-thdesign"><table class="has-black-color has-mainttltext-background-color has-text-color has-background has-link-color has-fixed-layout"><tbody><tr><td>Dimensional constraints (Dimensions)</td><td>Determine size</td><td>Specify length, angle, diameter, and so on as numerical values</td></tr><tr><td>Geometric constraints (Relations)</td><td>Determine relationships between entities</td><td>Specify Parallel, Perpendicular, Tangent, Concentric, Symmetric, and so on</td></tr></tbody></table></figure>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">Many beginners tend to reach for dimensional constraints, which are easy to see.</p>



<p class="wp-block-paragraph">However, <strong>experienced designers use geometric constraints heavily</strong>.</p>



<p class="wp-block-paragraph">The reason ties into the one idea I describe in the next section.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">The One Constraint Mindset Experienced Designers Use</h2>



<p class="wp-block-paragraph">What experienced designers always have in mind when they constrain a sketch is to <strong>express the <span class="pre--maker span-stk-maker-pink">&#8220;design intent&#8221;</span> with constraints</strong>.</p>



<p class="wp-block-paragraph">This is not a box-ticking goal like &#8220;make the sketch black.&#8221;</p>



<p class="wp-block-paragraph">What matters is telling SOLIDWORKS exactly <strong>the intent the designer has built in</strong>: <strong>&#8220;this part should always sit in this position relative to that part.&#8221;</strong></p>



<p class="wp-block-paragraph">And to convey the design intent accurately, there are many situations where choosing a geometric constraint rather than a dimensional constraint is the better option.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Why Choose Geometric Constraints</h3>



<p class="wp-block-paragraph">Geometric constraints are a good choice when <strong>&#8220;you want to keep a relationship even if the dimensions change.&#8221;</strong></p>



<p class="wp-block-paragraph">For example, suppose your design intent is &#8220;the two holes always have the same diameter and sit symmetrically about the centerline.&#8221;</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-red_box type_simple"><div class="box_title"><span class="span__box_title">Dimensional constraints only</span></div><div class="cboxcomment">
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="987" height="569" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/sketch-dimensions-only.png" alt="Sketch with a separate Ø12 dimension on each of the two holes" class="wp-image-3621" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/sketch-dimensions-only.png 987w, https://sugitama-lab.tech/wp-content/uploads/2026/11/sketch-dimensions-only-300x173.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/sketch-dimensions-only-768x443.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/sketch-dimensions-only-485x280.png 485w" sizes="auto, (max-width: 987px) 100vw, 987px" /></figure>



<p class="is-style-supplement-warning wp-block-paragraph">Every time you change the diameter of one hole, you have to change the diameter of the other hole by hand as well.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-green_box type_simple"><div class="box_title"><span class="span__box_title">Using geometric constraints (Equal, Symmetric)</span></div><div class="cboxcomment">
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="864" height="514" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/sketch-equal-symmetric.png" alt="Sketch with one Ø12 dimension, Equal and Symmetric relations, and a centerline between the holes" class="wp-image-3622" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/sketch-equal-symmetric.png 864w, https://sugitama-lab.tech/wp-content/uploads/2026/11/sketch-equal-symmetric-300x178.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/sketch-equal-symmetric-768x457.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/sketch-equal-symmetric-485x289.png 485w" sizes="auto, (max-width: 864px) 100vw, 864px" /></figure>



<p class="is-style-supplement-succes wp-block-paragraph">Just change the diameter of one hole, and the other hole is updated automatically.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">With geometric constraints, you can <strong>reduce the number of places where you have to enter dimensions</strong>. In the plate above, one diameter dimension is enough instead of two.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">Dimension changes happen frequently during design.</p>



<p class="wp-block-paragraph">A model that has to be corrected by hand every time is very likely to cause design mistakes when you miss an update.</p>



<p class="wp-block-paragraph">Geometric constraints let you lock in the <strong>fundamental relationships</strong> of the model.</p>



<p class="wp-block-paragraph">That removes the need to type dimensions by hand and gives you a <strong>&#8220;robust model&#8221; that stands up to design changes</strong>.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Step by Step: Reaching &#8220;Fully Defined&#8221; as Quickly as Possible</h3>



<p class="wp-block-paragraph">To build a robust model, follow the steps below and aim to make the sketch <strong>Fully Defined (black)</strong>.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<div class="stk_step is-style-step_design1" style="--first_num:0">
<div class="stk_step__child"><div class="stk_step__label"><span class="__labeltext">STEP</span></div><div class="stk_step__content">
<p class="wp-block-paragraph"><strong>Decide the sketch&#8217;s anchor (fixed point)</strong></p>



<p class="wp-block-paragraph">Fix (constrain) the reference point of the sketch to the origin or to an edge of another feature.</p>
</div></div>



<div class="stk_step__child"><div class="stk_step__label"><span class="__labeltext">STEP</span></div><div class="stk_step__content">
<p class="wp-block-paragraph"><strong>Define relationships with geometric constraints</strong></p>



<p class="wp-block-paragraph">Apply geometric constraints such as Parallel, Perpendicular, Symmetric, and Tangent first, to define the relationships between entities.</p>
</div></div>



<div class="stk_step__child"><div class="stk_step__label"><span class="__labeltext">STEP</span></div><div class="stk_step__content">
<p class="wp-block-paragraph"><strong>Set the size with dimensional constraints</strong></p>



<p class="wp-block-paragraph">Use dimensional constraints to fill in the remaining degrees of freedom and turn the whole sketch black (Fully Defined).</p>
</div></div>



<div class="stk_step__child"><div class="stk_step__label"><span class="__labeltext">STEP</span></div><div class="stk_step__content">
<p class="wp-block-paragraph"><strong>Sketch complete</strong></p>
</div></div>
</div>



<p class="wp-block-paragraph">By drawing your sketches this way, <strong>your work becomes more efficient</strong>, and you end up with a sketch that <strong>clearly reflects your design intent</strong>.</p>



<p class="wp-block-paragraph"></p>



<h2 class="wp-block-heading">3 Constraint Techniques That Prevent Design Mistakes</h2>



<p class="wp-block-paragraph">Here are three concrete constraint techniques that experienced designers actually use to prevent design mistakes before they happen.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Technique 1: Use Symmetric Constraints and Midpoints</h3>



<p class="wp-block-paragraph">Define symmetric shapes with a <strong>Symmetric</strong> constraint.</p>



<p class="wp-block-paragraph">With a Symmetric constraint about a centerline, changing a dimension on one side automatically updates the shape on the other side.</p>



<p class="wp-block-paragraph">Also, when you want to place something at the center, use a <strong>Midpoint</strong> constraint.</p>



<p class="wp-block-paragraph">It is handy because whatever you place stays centered even when the dimensions change.</p>



<p class="wp-block-paragraph">Symmetric constraints and Midpoint constraints are very useful techniques when you model symmetric shapes.</p>



<p class="wp-block-paragraph">They halve the number of places you need to fix when the design changes, which helps prevent design mistakes caused by missed corrections.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">It isn&#8217;t a sketch technique, but when you extrude, using <strong>Mid Plane</strong> also gives you symmetry in the 3D shape. Please give it a try.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Technique 2: Use Centerlines and Points</h3>



<p class="wp-block-paragraph">Insert <strong>centerlines (construction geometry) and points</strong>, which don&#8217;t affect the actual shape, into the sketch and base your constraints on them.</p>



<p class="wp-block-paragraph">For example, when you define the center position of a hole, don&#8217;t dimension the hole itself. Instead, <strong>dimension from a centerline</strong> and put the hole&#8217;s center point on that centerline.</p>



<p class="wp-block-paragraph">This not only makes the hole position easy to change, but also makes <strong>the design reference clear</strong> and <strong>makes your intent easier for other designers to understand</strong>.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">Placing holes along a centerline is easy to see at a glance, so I use it a lot myself.</p>



<p class="wp-block-paragraph">If you turn on <strong>Automatic relations</strong> in <strong>System Options</strong>, simply drawing a horizontal or vertical centerline adds the matching constraint automatically.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">Also, if you add an <strong>Equal</strong> constraint to centerlines, you can easily <strong>place items at equal intervals</strong>.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Technique 3: Constrain with External References in Mind</h3>



<p class="wp-block-paragraph">Sketching with the assembly in mind can also prevent design mistakes in a single part.</p>



<ul class="wp-block-list">
<li>Single-part constraints: constraints that stay inside the sketch.</li>



<li>External references: constraints that reference something outside the part (a feature of another part or of the assembly).</li>
</ul>



<p class="wp-block-paragraph">By defining intent such as &#8220;this part&#8217;s hole always aligns with the pin of another part in the assembly&#8221; through an external reference, you can prevent design mistakes such as interference and misalignment when the assembly is put together.</p>



<p class="wp-block-paragraph">However, be careful: heavy use of external references can <strong>make files heavier to work with and errors more likely</strong>.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">External references are a double-edged sword.</p>



<p class="wp-block-paragraph">They are useful when used well, but they have <strong>downsides</strong>, so making everything an external reference isn&#8217;t a good idea.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">Summary</h2>



<p class="wp-block-paragraph">In this article, I explained <strong>the basics of sketch constraints</strong> and <strong>&#8220;the one idea that reduces design mistakes.&#8221;</strong></p>



<p class="wp-block-paragraph">The key tips for sketches that prevent design mistakes are as follows.</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_ttl"><div class="box_title"><span class="span__box_title">Sketching tips that prevent design mistakes</span></div><div class="cboxcomment">
<ol class="wp-block-list">
<li>Always make the sketch <strong>Fully Defined (black)</strong></li>



<li><strong>Prioritize geometric constraints</strong>, and set the size with dimensional constraints last</li>



<li>Constrain the sketch so that your <strong>design intent</strong> comes across</li>
</ol>
</div></div>



<p class="wp-block-paragraph">If you can put your design intent into the sketch accurately, you can build a robust model that is less prone to errors and mistakes.</p>



<p class="wp-block-paragraph">Please keep this in mind the next time you sketch.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="is-style-default wp-block-paragraph">However, the constraint techniques in this article don&#8217;t apply to every case, so please use them <strong>case by case</strong>.</p>



<p class="wp-block-paragraph">What matters is thinking about <strong>&#8220;how can I put my design intent into the sketch accurately?&#8221;</strong></p>



<p class="wp-block-paragraph">Rather than following this article to the letter, I hope you&#8217;ll take it as <strong>a way of thinking you can apply when you design</strong>.</p>



<p class="wp-block-paragraph">Thank you for reading to the end.</p>

]]></content:encoded>
					
					<wfw:commentRss>https://sugitama-lab.tech/en/solidworks-sketch-constraints/feed/</wfw:commentRss>
			<slash:comments>0</slash:comments>
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">3624</post-id>	</item>
	</channel>
</rss>
