<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	>

<channel>
	<title>mistake prevention &#8211; Sugitama-Lab.</title>
	<atom:link href="https://sugitama-lab.tech/en/tag/mistake-prevention/feed/" rel="self" type="application/rss+xml" />
	<link>https://sugitama-lab.tech</link>
	<description>Handy SOLIDWORKS tips, explained</description>
	<lastBuildDate>Tue, 10 Nov 2026 10:03:41 +0000</lastBuildDate>
	<language>en-US</language>
	<sy:updatePeriod>
	hourly	</sy:updatePeriod>
	<sy:updateFrequency>
	1	</sy:updateFrequency>
	

<image>
	<url>https://sugitama-lab.tech/wp-content/uploads/2021/12/cropped-illust_Tool_icon-32x32.png</url>
	<title>mistake prevention &#8211; Sugitama-Lab.</title>
	<link>https://sugitama-lab.tech</link>
	<width>32</width>
	<height>32</height>
</image> 
<site xmlns="com-wordpress:feed-additions:1">205154850</site>	<item>
		<title>SOLIDWORKS System Options for Better Usability: Recommended Settings</title>
		<link>https://sugitama-lab.tech/en/solidworks-system-options-usability/</link>
					<comments>https://sugitama-lab.tech/en/solidworks-system-options-usability/#respond</comments>
		
		<dc:creator><![CDATA[sugitama]]></dc:creator>
		<pubDate>Mon, 09 Nov 2026 22:42:01 +0000</pubDate>
				<category><![CDATA[settings]]></category>
		<category><![CDATA[business efficiency]]></category>
		<category><![CDATA[for beginners]]></category>
		<category><![CDATA[initial settings]]></category>
		<category><![CDATA[mistake prevention]]></category>
		<category><![CDATA[speed & performance]]></category>
		<guid isPermaLink="false">https://sugitama-lab.tech/?p=3690</guid>

					<description><![CDATA[Recommended SOLIDWORKS System Options for better usability: settings that cut down on operations and prevent input mistakes, with the pros and cons of the ones that trade off against speed.]]></description>
										<content:encoded><![CDATA[
<p class="wp-block-paragraph">Before you start designing in SOLIDWORKS, I recommend setting up the System Options.</p>



<p class="wp-block-paragraph">A well-prepared environment lets you skip some steps, avoid mistakes, and reduce the strain on you. In short, it makes design work more efficient.</p>



<p class="wp-block-paragraph">This article explains the SOLIDWORKS System Options, focusing on the settings that improve usability.</p>



<p class="wp-block-paragraph">The settings are simple, and you can finish them in about five minutes. I hope you will give them a try.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray width_full l icon_red"><figure class="icon"><img decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">This article recommends settings from two angles: cutting down on the number of operations, and preventing input mistakes and missed checks.</p>



<p class="wp-block-paragraph">A few of the settings trade off against processing speed, so I list their pros and cons.</p>
</div></div>



<p class="wp-block-paragraph">If you want to make SOLIDWORKS itself run lighter, see the article below.</p>



<p class="wp-block-paragraph">&nbsp;&nbsp;» <a href="https://sugitama-lab.tech/en/solidworks-performance-optimize/"><strong>SOLIDWORKS Performance Optimization: Settings to Make SOLIDWORKS Run Faster</strong></a></p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">What Are System Options?</h2>



<p class="wp-block-paragraph">System Options are settings that apply every time you use SOLIDWORKS.</p>



<p class="wp-block-paragraph">With them, you can switch many of the features, behaviors, and tools built into SOLIDWORKS on or off.</p>



<p class="wp-block-paragraph">If you tune the System Options well, you get benefits like these:</p>



<ul class="wp-block-list">
<li>Simpler operations mean less mouse movement, which saves working time.</li>



<li>It is easier to see what changed and what you are editing, which helps prevent mistakes.</li>



<li>Fewer missed checks and careless mistakes make your work more stable.</li>
</ul>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray width_full l icon_red"><figure class="icon"><img decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">When your System Options are tuned, there is less stress in your work, and design becomes more enjoyable.</p>
</div></div>



<h2 class="wp-block-heading">Setting Up System Options</h2>



<p class="wp-block-paragraph">To open the System Options, choose <strong>Tools &gt; Options</strong>.</p>



<figure class="wp-block-image size-large"><img fetchpriority="high" decoding="async" width="285" height="990" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/perf-sysopt-open-menu.png" alt="The Tools menu with Options selected" class="wp-image-3560" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/perf-sysopt-open-menu.png 285w, https://sugitama-lab.tech/wp-content/uploads/2026/11/perf-sysopt-open-menu-86x300.png 86w" sizes="(max-width: 285px) 100vw, 285px" /></figure>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">Below are my recommended settings for better usability.</p>



<p class="is-style-supplement-normal wp-block-paragraph">Depending on your version of SOLIDWORKS, some of the options in this article may not exist, or their names and positions may differ. If you cannot find an item, you can simply skip it.</p>



<p class="wp-block-paragraph"><strong>The settings in this article put usability (ease of work and accuracy) first.</strong></p>



<p class="wp-block-paragraph">Some settings improve usability when you switch them on or off (or choose a particular value), but they make processing take longer, which can lower your efficiency overall. I mark those with <strong>[Your call]</strong> at the start of the item, and explain the trade-off.</p>



<p class="wp-block-paragraph">If you would rather give up some convenience for faster processing, see this article instead:</p>



<p class="wp-block-paragraph">&nbsp;&nbsp;» <a href="https://sugitama-lab.tech/en/solidworks-performance-optimize/"><strong>SOLIDWORKS Performance Optimization: Settings to Make SOLIDWORKS Run Faster</strong></a></p>



<p class="wp-block-paragraph">There is no single right answer. Decide based on the size of your models, the specs of your PC, and your own priorities.</p>



<h3 class="wp-block-heading">System Options &gt; General</h3>



<figure class="wp-block-image size-full"><img decoding="async" width="1323" height="668" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-general.png" alt="System Options, General page" class="wp-image-3561" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-general.png 1323w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-general-300x151.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-general-1024x517.png 1024w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-general-768x388.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-general-485x245.png 485w" sizes="(max-width: 1323px) 100vw, 1323px" /></figure>



<ol class="wp-block-list">
<li><strong>Select &#8220;Input dimension value&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">When this is selected, a box for typing the dimension value appears as soon as you place a dimension (SOLIDWORKS calls it the Modify box).</p>



<p class="wp-block-paragraph">You can enter the value right after placing the dimension, which makes the work more efficient.</p>



<ol start="2" class="wp-block-list">
<li><strong>Select &#8220;Automatically edit macro after recording&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">The Visual Basic editor opens right after you record a macro, so you can edit it immediately.</p>



<p class="wp-block-paragraph">When you create a macro, the main flow is to record it and then edit the VBA, so selecting this makes macro editing smoother.</p>



<ol start="3" class="wp-block-list">
<li><strong>Clear &#8220;Enable sounds for SOLIDWORKS events&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">Do the notification sounds that play with every operation bother you?</p>



<p class="wp-block-paragraph">Event sounds are not essential, so turning them off helps you stay focused without being distracted by extra noise.</p>



<ol start="4" class="wp-block-list">
<li><strong>[Your call] Select &#8220;Show thumbnail graphics in Windows Explorer&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">You can check a file’s shape from its thumbnail in Windows Explorer without opening the file.</p>



<p class="wp-block-paragraph">In exchange, SOLIDWORKS has to generate and display the thumbnails, which can make the display slower.</p>



<h3 class="wp-block-heading">System Options &gt; Drawings</h3>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="880" height="668" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-drawings.png" alt="System Options, Drawings page" class="wp-image-3562" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-drawings.png 880w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-drawings-300x228.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-drawings-768x583.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-drawings-485x368.png 485w" sizes="auto, (max-width: 880px) 100vw, 880px" /></figure>



<ol start="5" class="wp-block-list">
<li><strong>Clear &#8220;Disable note/dimension inference&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">When you place a note or dimension, SOLIDWORKS shows guide lines that line it up horizontally or vertically with the notes and dimensions already on the sheet.</p>



<p class="wp-block-paragraph">This makes it easier to produce a neat-looking drawing.</p>



<ol start="6" class="wp-block-list">
<li><strong>Select &#8220;Print out-of-sync water mark&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">If a drawing has not been updated to match its 3D model, a watermark saying so is printed on the drawing.</p>



<p class="wp-block-paragraph">This helps you avoid issuing a drawing that no longer matches the model without noticing.</p>



<ol start="7" class="wp-block-list">
<li><strong>Clear &#8220;Reduce spacing when dimensions are deleted or edited (add or change tolerance, text etc…)&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">This stops other dimensions from moving on their own when you delete or edit a dimension on the drawing.</p>



<ol start="8" class="wp-block-list">
<li><strong>Select &#8220;Reuse view letters from deleted auxiliary, detail, and section views&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">Suppose you have &#8220;Detail A&#8221; and &#8220;Detail B&#8221;, delete &#8220;Detail A&#8221;, and then create a new detail view. With this setting off, the new view gets the next letter, &#8220;Detail C&#8221;, and the lettering ends up with gaps that make the drawing harder to read.</p>



<p class="wp-block-paragraph">With the setting on, the free letter &#8220;A&#8221; is used again, so the labels run in order with no gaps.</p>



<h3 class="wp-block-heading">System Options &gt; Drawings &gt; Performance</h3>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="880" height="668" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-drawings-performance.png" alt="System Options, Drawings, Performance page" class="wp-image-3563" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-drawings-performance.png 880w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-drawings-performance-300x228.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-drawings-performance-768x583.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-drawings-performance-485x368.png 485w" sizes="auto, (max-width: 880px) 100vw, 880px" /></figure>



<ol start="9" class="wp-block-list">
<li><strong>[Your call] Select &#8220;Allow auto-update when opening drawings&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">When you open a drawing, changes made to the model are reflected automatically. This helps you avoid the mistake of forgetting to update and issuing a drawing whose shape differs from the 3D model.</p>



<p class="wp-block-paragraph">On the other hand, an update always runs when you open the drawing, so opening files takes longer.</p>



<h3 class="wp-block-heading">System Options &gt; Colors</h3>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="880" height="676" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-colors.png" alt="System Options, Colors page" class="wp-image-3685" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-colors.png 880w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-colors-300x230.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-colors-768x590.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-colors-485x373.png 485w" sizes="auto, (max-width: 880px) 100vw, 880px" /></figure>



<ol start="10" class="wp-block-list">
<li><strong>Select &#8220;Use specified color for changed drawing dimensions on open&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">You can see the design changes at a glance, even if the drawing and the model were not open at the same time.</p>



<p class="wp-block-paragraph">If you change and save the model while the drawing is closed, and then open the drawing, the changed dimensions are shown in the specified color. (If you hover over one, you can also see its previous value.)</p>



<p class="wp-block-paragraph">When you save the drawing and reopen it, the dimensions return to their normal color.</p>



<ol start="11" class="wp-block-list">
<li><strong>Change the background to your liking</strong></li>
</ol>



<p class="wp-block-paragraph">The <strong>Background</strong> list lets you choose how light or dark the screen is.</p>



<p class="wp-block-paragraph">A change in screen brightness can help reduce eye strain during long working hours. Try it and set what suits you.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray width_full l icon_red"><figure class="icon"><img decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">When changed dimensions are easy to spot, you are less likely to make mistakes or miss a check. Item 11 is purely a matter of taste, so any choice is fine.</p>
</div></div>



<h3 class="wp-block-heading">System Options &gt; Sketch</h3>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="880" height="676" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-sketch.png" alt="System Options, Sketch page" class="wp-image-3686" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-sketch.png 880w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-sketch-300x230.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-sketch-768x590.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-sketch-485x373.png 485w" sizes="auto, (max-width: 880px) 100vw, 880px" /></figure>



<ol start="12" class="wp-block-list">
<li><strong>Select &#8220;Auto-rotate view normal to sketch plane on sketch creation and sketch edit&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">The view turns automatically so that you look straight at the sketch plane, which makes planar sketching easier.</p>



<ol start="13" class="wp-block-list">
<li><strong>Clear &#8220;Use fully defined sketches&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">When this is selected, you cannot exit a sketch until its dimensions and relations are fully defined.</p>



<p class="wp-block-paragraph">That helps you avoid forgetting to fully define a sketch (black lines). But in real work there are times when you want to leave a sketch Under Defined (blue lines), so I clear this option.</p>



<ol start="14" class="wp-block-list">
<li><strong>Select &#8220;Scale sketch on first dimension creation&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">When you add the first dimension to a rough sketch, the whole sketch is scaled to match that dimension value.</p>



<p class="wp-block-paragraph">With the option cleared, entering the first dimension changes only that part, and the proportions against the rest of the sketch can break and distort the shape.</p>



<p class="wp-block-paragraph">With it selected, you can draw the shape first and then set the size all at once with the first dimension.</p>



<ol start="15" class="wp-block-list">
<li><strong>Select &#8220;Enable on screen numeric input on entity creation&#8221;</strong></li>



<li><strong>Select &#8220;Create dimension only when value is entered&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">These two settings go together. With them selected, you can enter a dimension and set its value while you are still drawing the sketch.</p>



<p class="wp-block-paragraph">Normally you draw a line, add a dimension with Smart Dimension, and then type the value. With these settings you can enter the dimension as you draw the line, which shortens sketching time.</p>



<ol start="17" class="wp-block-list">
<li><strong>Select &#8220;Preview sketch dimension when selected&#8221; (available in SOLIDWORKS 2024 and later)</strong></li>
</ol>



<p class="wp-block-paragraph">You do not need a dimension command: just select a sketch entity, and a preview of its dimension appears that you can click to type a value.</p>



<p class="wp-block-paragraph">This lets you dimension and constrain sketches efficiently and intuitively.</p>



<h3 class="wp-block-heading">System Options &gt; Display</h3>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="880" height="668" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-display.png" alt="System Options, Display page" class="wp-image-3564" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-display.png 880w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-display-300x228.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-display-768x583.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-display-485x368.png 485w" sizes="auto, (max-width: 880px) 100vw, 880px" /></figure>



<ol start="18" class="wp-block-list">
<li><strong>[Your call] Select &#8220;Dynamic highlight from graphics view&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">This highlights an edge or face when you move the mouse cursor over it, before you click.</p>



<p class="wp-block-paragraph">The highlight is calculated in real time every time the cursor moves, so with large assemblies and other heavy models it can make the display <strong>stutter</strong>.</p>



<h3 class="wp-block-heading">System Options &gt; Performance</h3>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="880" height="668" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-performance.png" alt="System Options, Performance page" class="wp-image-3565" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-performance.png 880w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-performance-300x228.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-performance-768x583.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-performance-485x368.png 485w" sizes="auto, (max-width: 880px) 100vw, 880px" /></figure>



<ol start="19" class="wp-block-list">
<li><strong>[Your call] Select &#8220;Verification on rebuild (enable advanced body checking)&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">Every time the model is rebuilt, SOLIDWORKS runs an additional check for problems such as inconsistent geometry. You can catch model problems early, which helps you avoid designing on without noticing them.</p>



<p class="wp-block-paragraph">The time taken by that check is added to every rebuild.</p>



<ol start="20" class="wp-block-list">
<li><strong>[Your call] Set &#8220;Mate animation speed&#8221; to Fast</strong></li>
</ol>



<p class="wp-block-paragraph">When you apply a mate in an assembly, you can watch the animation of how the part moves into position. Because you can see whether it assembled in the intended orientation and position, you are less likely to miss a wrong mate.</p>



<p class="wp-block-paragraph">If the operation feels sluggish, turning the animation off may improve performance.</p>



<h3 class="wp-block-heading">System Options &gt; Assemblies</h3>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="880" height="668" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-assemblies.png" alt="System Options, Assemblies page" class="wp-image-3566" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-assemblies.png 880w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-assemblies-300x228.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-assemblies-768x583.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-assemblies-485x368.png 485w" sizes="auto, (max-width: 880px) 100vw, 880px" /></figure>



<ol start="21" class="wp-block-list">
<li><strong>Select &#8220;Move components by dragging&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">Within the remaining degrees of freedom (the directions the part can still move), you can drag a part or subassembly with the mouse to move it.</p>



<p class="wp-block-paragraph">You do not have to call up a move command each time, so you can move parts intuitively.</p>



<ol start="22" class="wp-block-list">
<li><strong>[Your call] Select &#8220;Update model graphics when saving files&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">This updates the model’s display data (graphics data) to the latest state whenever you save an assembly.</p>



<p class="wp-block-paragraph">If that display data is out of date, you may see the pre-change shape when you open the assembly in lightweight mode (a mode that loads only part of each component’s data so it opens faster), or in another viewer such as eDrawings.</p>



<p class="wp-block-paragraph">With this selected, the data is refreshed at every save, which helps prevent the mismatch of opening a file and finding an old shape. Refreshing the data at every save may add to the save time, so decide based on how large your assemblies are.</p>



<h3 class="wp-block-heading">System Options &gt; External References</h3>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="880" height="668" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-external-references.png" alt="System Options, External References page" class="wp-image-3567" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-external-references.png 880w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-external-references-300x228.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-external-references-768x583.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-external-references-485x368.png 485w" sizes="auto, (max-width: 880px) 100vw, 880px" /></figure>



<ol start="23" class="wp-block-list">
<li><strong>Clear &#8220;Don’t prompt to save read-only referenced documents (discard changes)&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">You may edit a file without noticing that it was opened read-only.</p>



<p class="wp-block-paragraph">With this option cleared, SOLIDWORKS warns you that the file is open read-only, which helps you avoid losing the edits you made.</p>



<ol start="24" class="wp-block-list">
<li><strong>Select &#8220;Update component names when documents are replaced&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">When you swap a part in an assembly with the Replace command, the name in the tree is updated to the new file name automatically.</p>



<ol start="25" class="wp-block-list">
<li><strong>Clear &#8220;Force referenced document to save to the same version as the parent document.&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">Suppose you open and save an assembly made in an older version of SOLIDWORKS. With this option selected, all the parts and subassemblies in the assembly are converted to the current version and saved, including files you did not edit.</p>



<p class="wp-block-paragraph">With the option cleared, only the files you edited are saved in the current version, and the referenced files you did not touch stay in their original version.</p>



<p class="wp-block-paragraph">This can shorten save times. It also helps when you share files with someone who uses an older version of SOLIDWORKS: you will not accidentally upgrade a file to a version they cannot open.</p>



<h3 class="wp-block-heading">System Options &gt; FeatureManager</h3>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="880" height="682" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-featuremanager.png" alt="System Options, FeatureManager page" class="wp-image-3568" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-featuremanager.png 880w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-featuremanager-300x232.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-featuremanager-768x595.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-featuremanager-485x376.png 485w" sizes="auto, (max-width: 880px) 100vw, 880px" /></figure>



<ol start="26" class="wp-block-list">
<li><strong>Select &#8220;Scroll selected item into view&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">When you click a part or face in the 3D model, the matching item in the FeatureManager design tree (the list of parts and features on the left side of the screen) scrolls into view and is highlighted.</p>



<p class="wp-block-paragraph">In an assembly, you do not have to hunt for &#8220;which part in the tree is this?&#8221;</p>



<ol start="27" class="wp-block-list">
<li><strong>[Your call] Select &#8220;Dynamic highlight&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">When you move the mouse cursor over an edge, a face, or an item in the FeatureManager design tree, the target is highlighted before you click.</p>



<p class="wp-block-paragraph">It helps you avoid mistakes such as clicking and finding you selected a different face than you meant.</p>



<p class="wp-block-paragraph">However, the highlight is calculated in real time every time the cursor moves, so <strong>SOLIDWORKS can become sluggish</strong>.</p>



<h3 class="wp-block-heading">System Options &gt; View</h3>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="880" height="690" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-view.png" alt="System Options, View page" class="wp-image-3687" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-view.png 880w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-view-300x235.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-view-768x602.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-view-485x380.png 485w" sizes="auto, (max-width: 880px) 100vw, 880px" /></figure>



<ol start="28" class="wp-block-list">
<li><strong>Select &#8220;Reverse mouse wheel zoom direction&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">Turning the mouse wheel zooms a 3D model or a drawing in and out.</p>



<p class="wp-block-paragraph">The default zoom direction in SOLIDWORKS may feel opposite to what you are used to in other apps, such as Excel, so some people find it awkward.</p>



<p class="wp-block-paragraph">If you select this option, the wheel direction can match those apps, which makes it easier to use. (Which direction feels natural is a matter of habit, so skip this if the default suits you.)</p>



<h3 class="wp-block-heading">System Options &gt; Backup/Recover/Version</h3>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="880" height="690" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-backup-recover.png" alt="System Options, Backup/Recover/Version page" class="wp-image-3688" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-backup-recover.png 880w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-backup-recover-300x235.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-backup-recover-768x602.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-backup-recover-485x380.png 485w" sizes="auto, (max-width: 880px) 100vw, 880px" /></figure>



<ol start="29" class="wp-block-list">
<li><strong>Select &#8220;Save auto-recover information every:&#8221; and enter the interval you want</strong></li>
</ol>



<p class="wp-block-paragraph">When you work with several large files open, or run complex operations, SOLIDWORKS can crash or freeze.</p>



<p class="wp-block-paragraph">To protect the file you are editing in such cases, I recommend saving auto-recover information.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray width_full l icon_red"><figure class="icon"><img decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">Unfortunately, SOLIDWORKS can freeze or shut down unexpectedly.</p>



<p class="wp-block-paragraph">I set mine to 20 minutes, since I can live with redoing about that much work, including the mental cost.</p>
</div></div>



<p class="wp-block-paragraph">Each auto-save makes SOLIDWORKS slower for a moment, so do not set the interval too short.</p>



<p class="is-style-supplement-warning wp-block-paragraph">Even with auto-save enabled, there are cases where nothing is saved automatically.<br><strong>Saving as you edit</strong> is the best protection.</p>



<h3 class="wp-block-heading">System Options &gt; Messages/Errors/Warnings</h3>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="880" height="682" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-messages-errors-warnings.png" alt="System Options, Messages/Errors/Warnings page" class="wp-image-3569" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-messages-errors-warnings.png 880w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-messages-errors-warnings-300x232.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-messages-errors-warnings-768x595.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-messages-errors-warnings-485x376.png 485w" sizes="auto, (max-width: 880px) 100vw, 880px" /></figure>



<ol start="30" class="wp-block-list">
<li><strong>Select &#8220;Remind me when a document has not been saved for:&#8221; and enter the time you want</strong></li>



<li><strong>Select &#8220;Automatically dismiss notifications after:&#8221; and enter the time you want</strong></li>
</ol>



<p class="wp-block-paragraph">If you keep editing a file and the time you entered passes without a save, a message prompting you to save appears at the lower right of the screen.</p>



<p class="wp-block-paragraph">This reminder should not cost as much as saving auto-recover information, so a shorter interval than the auto-save interval should be fine.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray width_full l icon_red"><figure class="icon"><img decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">The messages can feel a little annoying, but they keep you from forgetting to save, so I recommend setting them up.</p>



<p class="wp-block-paragraph">Honestly, they do not get in the way much.</p>
</div></div>



<h2 class="wp-block-heading">Bonus: Document Properties</h2>



<p class="wp-block-paragraph">Finally, here is a setting that helps prevent mistakes with overridden dimensions.</p>



<p class="wp-block-paragraph">Document Properties are set from the <strong>Document Properties</strong> tab of <strong>Tools &gt; Options</strong>. Open a file first, and then set the Document Properties.</p>



<ol start="32" class="wp-block-list">
<li><strong>Select the option that highlights overridden dimensions in a different color (found on the Dimensions page; available in SOLIDWORKS 2024 and later)</strong></li>
</ol>



<p class="wp-block-paragraph">Overridden dimensions (dimensions whose displayed value has been typed over instead of measured from the model) are shown in a different color. You can see at a glance which dimensions are temporarily or provisionally overridden, which helps you avoid unpleasant surprises.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray width_full l icon_red"><figure class="icon"><img decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">Used together with the System Options &gt; Colors settings, this makes changes even easier to spot.</p>
</div></div>



<h2 class="wp-block-heading">Summary</h2>



<p class="wp-block-paragraph">This article explained the SOLIDWORKS System Options, especially the settings that improve usability.</p>



<p class="wp-block-paragraph">Setting up your environment before you start real design work can reduce effort and help prevent mistakes.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray width_full l icon_red"><figure class="icon"><img decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">If you have recommended settings that I did not cover, I would be glad if you shared them in the comments.</p>
</div></div>



<p class="is-style-supplement-normal wp-block-paragraph">If you care more about the processing speed of SOLIDWORKS itself than about usability, see this article: <a href="https://sugitama-lab.tech/en/solidworks-performance-optimize/"><strong>SOLIDWORKS Performance Optimization: Settings to Make SOLIDWORKS Run Faster</strong></a></p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">Thank you for reading to the end.</p>
]]></content:encoded>
					
					<wfw:commentRss>https://sugitama-lab.tech/en/solidworks-system-options-usability/feed/</wfw:commentRss>
			<slash:comments>0</slash:comments>
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">3690</post-id>	</item>
		<item>
		<title>SOLIDWORKS Sketch Constraints: The One Idea That Prevents Design Mistakes</title>
		<link>https://sugitama-lab.tech/en/solidworks-sketch-constraints/</link>
					<comments>https://sugitama-lab.tech/en/solidworks-sketch-constraints/#respond</comments>
		
		<dc:creator><![CDATA[sugitama]]></dc:creator>
		<pubDate>Fri, 06 Nov 2026 05:48:00 +0000</pubDate>
				<category><![CDATA[Tips & Features]]></category>
		<category><![CDATA[mistake prevention]]></category>
		<category><![CDATA[operation skills]]></category>
		<guid isPermaLink="false">https://sugitama-lab.tech/?p=3624</guid>

					<description><![CDATA[Learn the basics of sketch constraints in SOLIDWORKS and the one design-intent idea that keeps your models from breaking when dimensions change.]]></description>
										<content:encoded><![CDATA[
<p class="wp-block-paragraph">Have you ever run into this when you adapt an existing design in SOLIDWORKS?</p>



<div class="wp-block-stk-plugin-cbox-notitle cbox is-style-glay_box type_normal"><div class="cboxcomment">
<ul class="wp-block-list">
<li>You change a shape or dimension slightly, and <strong>the whole model falls apart</strong>.</li>



<li>You change a shape or dimension slightly, and it turns into an <strong>unintended shape</strong>.</li>



<li>You change a shape or dimension slightly, and <strong>errors appear everywhere</strong>.</li>
</ul>
</div></div>



<p class="wp-block-paragraph">In fact, the cause of many of these problems is <strong>sketch constraints</strong>.</p>



<p class="wp-block-paragraph">The sketch is the foundation of a 3D shape.</p>



<p class="wp-block-paragraph">If your understanding of sketches is vague, you end up with a <strong><span class="pre--maker span-stk-maker-blue">&#8220;fragile model&#8221;</span></strong> that cannot handle design changes, no matter how carefully you model.</p>



<p class="wp-block-paragraph">If you build up features without understanding sketch constraints, even a small dimension change can make the entire model fall apart.</p>



<p class="wp-block-paragraph">When that happens, <strong>you spend a lot of time and effort fixing the model</strong>.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">I believe the cause of fragile models is a missing perspective: <strong>&#8220;communicating your design intent to SOLIDWORKS.&#8221;</strong></p>



<p class="wp-block-paragraph">This is hard to pick up just by learning the operations in a tutorial.</p>



<p class="wp-block-paragraph">I&#8217;m a mechanical engineer who uses SOLIDWORKS every day and holds the Certified SOLIDWORKS Professional (CSWP) certification. In this article, I explain <strong>&#8220;the basics of sketch constraints&#8221;</strong> that even beginners can put into practice right away, and <strong>&#8220;the one idea that reduces design mistakes.&#8221;</strong></p>



<p class="wp-block-paragraph">By reading this article, you will gain more than just operating skills: <strong>a way of thinking that helps you build models that are resilient to design changes and easy to reuse</strong>.</p>



<p class="wp-block-paragraph">Once you can build a <strong>&#8220;robust model&#8221;</strong> that doesn&#8217;t break easily, you can dramatically cut the time and effort you spend on dimension and shape changes.</p>



<p class="wp-block-paragraph">If your dimension changes never seem to go smoothly, this article is for you.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">Let&#8217;s level up as designers together. It starts with how you build a single sketch.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">What Are Sketch Constraints? Basics for Beginners</h2>



<p class="wp-block-paragraph">In SOLIDWORKS, sketch constraints are rules that fix the position, shape, and relationships of sketch entities (lines, circles, points, and so on).</p>



<p class="wp-block-paragraph">In SOLIDWORKS, geometric constraints are called <strong>relations</strong> and dimensional constraints are simply <strong>dimensions</strong>. This article uses &#8220;constraints&#8221; for both.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Understanding Constraint Status</h3>



<p class="wp-block-paragraph">You can tell whether a sketch entity is completely fixed by the color of its line.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_simple"><div class="box_title"><span class="span__box_title">Sketch constraint status</span></div><div class="cboxcomment">
<ul class="wp-block-list">
<li><strong>Fully Defined</strong>: All degrees of freedom are constrained and the entity cannot move. It is displayed in <strong>black</strong>.</li>



<li class="has-stk-palette-nine-color has-text-color has-link-color wp-elements-1"><strong>Under Defined</strong>: Degrees of freedom remain, so the entity may move unexpectedly when you drag it with the mouse. It is displayed in <strong>blue</strong>.</li>
</ul>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">In a sketch, <strong>aim to make every line and point you draw Fully Defined</strong>.</p>



<p class="wp-block-paragraph">If Under Defined entities remain, the sketch may look fixed at first glance, but when you later change a dimension or add another feature, the shape can change in unexpected directions and lead to design mistakes.</p>



<p class="wp-block-paragraph">Judge whether a sketch is finished by checking that <strong>all of the sketch entities are black</strong>, not by how the shape looks.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">You can also spot an Under Defined sketch in the FeatureManager design tree. If Under Defined sketch entities remain, a <strong>(-)</strong> mark appears before the sketch name.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">The Two Types of Constraints and Their Roles</h3>



<p class="wp-block-paragraph">To fully define a sketch, you add constraints to the sketch entities.</p>



<p class="wp-block-paragraph">Constraints fall into the following two broad types.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<figure class="wp-block-table is-style-stk-table-border stk-table-thdesign"><table class="has-black-color has-mainttltext-background-color has-text-color has-background has-link-color has-fixed-layout"><tbody><tr><td>Dimensional constraints (Dimensions)</td><td>Determine size</td><td>Specify length, angle, diameter, and so on as numerical values</td></tr><tr><td>Geometric constraints (Relations)</td><td>Determine relationships between entities</td><td>Specify Parallel, Perpendicular, Tangent, Concentric, Symmetric, and so on</td></tr></tbody></table></figure>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">Many beginners tend to reach for dimensional constraints, which are easy to see.</p>



<p class="wp-block-paragraph">However, <strong>experienced designers use geometric constraints heavily</strong>.</p>



<p class="wp-block-paragraph">The reason ties into the one idea I describe in the next section.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">The One Constraint Mindset Experienced Designers Use</h2>



<p class="wp-block-paragraph">What experienced designers always have in mind when they constrain a sketch is to <strong>express the <span class="pre--maker span-stk-maker-pink">&#8220;design intent&#8221;</span> with constraints</strong>.</p>



<p class="wp-block-paragraph">This is not a box-ticking goal like &#8220;make the sketch black.&#8221;</p>



<p class="wp-block-paragraph">What matters is telling SOLIDWORKS exactly <strong>the intent the designer has built in</strong>: <strong>&#8220;this part should always sit in this position relative to that part.&#8221;</strong></p>



<p class="wp-block-paragraph">And to convey the design intent accurately, there are many situations where choosing a geometric constraint rather than a dimensional constraint is the better option.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Why Choose Geometric Constraints</h3>



<p class="wp-block-paragraph">Geometric constraints are a good choice when <strong>&#8220;you want to keep a relationship even if the dimensions change.&#8221;</strong></p>



<p class="wp-block-paragraph">For example, suppose your design intent is &#8220;the two holes always have the same diameter and sit symmetrically about the centerline.&#8221;</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-red_box type_simple"><div class="box_title"><span class="span__box_title">Dimensional constraints only</span></div><div class="cboxcomment">
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="987" height="569" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/sketch-dimensions-only.png" alt="Sketch with a separate Ø12 dimension on each of the two holes" class="wp-image-3621" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/sketch-dimensions-only.png 987w, https://sugitama-lab.tech/wp-content/uploads/2026/11/sketch-dimensions-only-300x173.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/sketch-dimensions-only-768x443.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/sketch-dimensions-only-485x280.png 485w" sizes="auto, (max-width: 987px) 100vw, 987px" /></figure>



<p class="is-style-supplement-warning wp-block-paragraph">Every time you change the diameter of one hole, you have to change the diameter of the other hole by hand as well.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-green_box type_simple"><div class="box_title"><span class="span__box_title">Using geometric constraints (Equal, Symmetric)</span></div><div class="cboxcomment">
<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="864" height="514" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/sketch-equal-symmetric.png" alt="Sketch with one Ø12 dimension, Equal and Symmetric relations, and a centerline between the holes" class="wp-image-3622" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/sketch-equal-symmetric.png 864w, https://sugitama-lab.tech/wp-content/uploads/2026/11/sketch-equal-symmetric-300x178.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/sketch-equal-symmetric-768x457.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/sketch-equal-symmetric-485x289.png 485w" sizes="auto, (max-width: 864px) 100vw, 864px" /></figure>



<p class="is-style-supplement-succes wp-block-paragraph">Just change the diameter of one hole, and the other hole is updated automatically.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">With geometric constraints, you can <strong>reduce the number of places where you have to enter dimensions</strong>. In the plate above, one diameter dimension is enough instead of two.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">Dimension changes happen frequently during design.</p>



<p class="wp-block-paragraph">A model that has to be corrected by hand every time is very likely to cause design mistakes when you miss an update.</p>



<p class="wp-block-paragraph">Geometric constraints let you lock in the <strong>fundamental relationships</strong> of the model.</p>



<p class="wp-block-paragraph">That removes the need to type dimensions by hand and gives you a <strong>&#8220;robust model&#8221; that stands up to design changes</strong>.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Step by Step: Reaching &#8220;Fully Defined&#8221; as Quickly as Possible</h3>



<p class="wp-block-paragraph">To build a robust model, follow the steps below and aim to make the sketch <strong>Fully Defined (black)</strong>.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<div class="stk_step is-style-step_design1" style="--first_num:0">
<div class="stk_step__child"><div class="stk_step__label"><span class="__labeltext">STEP</span></div><div class="stk_step__content">
<p class="wp-block-paragraph"><strong>Decide the sketch&#8217;s anchor (fixed point)</strong></p>



<p class="wp-block-paragraph">Fix (constrain) the reference point of the sketch to the origin or to an edge of another feature.</p>
</div></div>



<div class="stk_step__child"><div class="stk_step__label"><span class="__labeltext">STEP</span></div><div class="stk_step__content">
<p class="wp-block-paragraph"><strong>Define relationships with geometric constraints</strong></p>



<p class="wp-block-paragraph">Apply geometric constraints such as Parallel, Perpendicular, Symmetric, and Tangent first, to define the relationships between entities.</p>
</div></div>



<div class="stk_step__child"><div class="stk_step__label"><span class="__labeltext">STEP</span></div><div class="stk_step__content">
<p class="wp-block-paragraph"><strong>Set the size with dimensional constraints</strong></p>



<p class="wp-block-paragraph">Use dimensional constraints to fill in the remaining degrees of freedom and turn the whole sketch black (Fully Defined).</p>
</div></div>



<div class="stk_step__child"><div class="stk_step__label"><span class="__labeltext">STEP</span></div><div class="stk_step__content">
<p class="wp-block-paragraph"><strong>Sketch complete</strong></p>
</div></div>
</div>



<p class="wp-block-paragraph">By drawing your sketches this way, <strong>your work becomes more efficient</strong>, and you end up with a sketch that <strong>clearly reflects your design intent</strong>.</p>



<p class="wp-block-paragraph"></p>



<h2 class="wp-block-heading">3 Constraint Techniques That Prevent Design Mistakes</h2>



<p class="wp-block-paragraph">Here are three concrete constraint techniques that experienced designers actually use to prevent design mistakes before they happen.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Technique 1: Use Symmetric Constraints and Midpoints</h3>



<p class="wp-block-paragraph">Define symmetric shapes with a <strong>Symmetric</strong> constraint.</p>



<p class="wp-block-paragraph">With a Symmetric constraint about a centerline, changing a dimension on one side automatically updates the shape on the other side.</p>



<p class="wp-block-paragraph">Also, when you want to place something at the center, use a <strong>Midpoint</strong> constraint.</p>



<p class="wp-block-paragraph">It is handy because whatever you place stays centered even when the dimensions change.</p>



<p class="wp-block-paragraph">Symmetric constraints and Midpoint constraints are very useful techniques when you model symmetric shapes.</p>



<p class="wp-block-paragraph">They halve the number of places you need to fix when the design changes, which helps prevent design mistakes caused by missed corrections.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">It isn&#8217;t a sketch technique, but when you extrude, using <strong>Mid Plane</strong> also gives you symmetry in the 3D shape. Please give it a try.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Technique 2: Use Centerlines and Points</h3>



<p class="wp-block-paragraph">Insert <strong>centerlines (construction geometry) and points</strong>, which don&#8217;t affect the actual shape, into the sketch and base your constraints on them.</p>



<p class="wp-block-paragraph">For example, when you define the center position of a hole, don&#8217;t dimension the hole itself. Instead, <strong>dimension from a centerline</strong> and put the hole&#8217;s center point on that centerline.</p>



<p class="wp-block-paragraph">This not only makes the hole position easy to change, but also makes <strong>the design reference clear</strong> and <strong>makes your intent easier for other designers to understand</strong>.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">Placing holes along a centerline is easy to see at a glance, so I use it a lot myself.</p>



<p class="wp-block-paragraph">If you turn on <strong>Automatic relations</strong> in <strong>System Options</strong>, simply drawing a horizontal or vertical centerline adds the matching constraint automatically.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">Also, if you add an <strong>Equal</strong> constraint to centerlines, you can easily <strong>place items at equal intervals</strong>.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Technique 3: Constrain with External References in Mind</h3>



<p class="wp-block-paragraph">Sketching with the assembly in mind can also prevent design mistakes in a single part.</p>



<ul class="wp-block-list">
<li>Single-part constraints: constraints that stay inside the sketch.</li>



<li>External references: constraints that reference something outside the part (a feature of another part or of the assembly).</li>
</ul>



<p class="wp-block-paragraph">By defining intent such as &#8220;this part&#8217;s hole always aligns with the pin of another part in the assembly&#8221; through an external reference, you can prevent design mistakes such as interference and misalignment when the assembly is put together.</p>



<p class="wp-block-paragraph">However, be careful: heavy use of external references can <strong>make files heavier to work with and errors more likely</strong>.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">External references are a double-edged sword.</p>



<p class="wp-block-paragraph">They are useful when used well, but they have <strong>downsides</strong>, so making everything an external reference isn&#8217;t a good idea.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">Summary</h2>



<p class="wp-block-paragraph">In this article, I explained <strong>the basics of sketch constraints</strong> and <strong>&#8220;the one idea that reduces design mistakes.&#8221;</strong></p>



<p class="wp-block-paragraph">The key tips for sketches that prevent design mistakes are as follows.</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_ttl"><div class="box_title"><span class="span__box_title">Sketching tips that prevent design mistakes</span></div><div class="cboxcomment">
<ol class="wp-block-list">
<li>Always make the sketch <strong>Fully Defined (black)</strong></li>



<li><strong>Prioritize geometric constraints</strong>, and set the size with dimensional constraints last</li>



<li>Constrain the sketch so that your <strong>design intent</strong> comes across</li>
</ol>
</div></div>



<p class="wp-block-paragraph">If you can put your design intent into the sketch accurately, you can build a robust model that is less prone to errors and mistakes.</p>



<p class="wp-block-paragraph">Please keep this in mind the next time you sketch.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="is-style-default wp-block-paragraph">However, the constraint techniques in this article don&#8217;t apply to every case, so please use them <strong>case by case</strong>.</p>



<p class="wp-block-paragraph">What matters is thinking about <strong>&#8220;how can I put my design intent into the sketch accurately?&#8221;</strong></p>



<p class="wp-block-paragraph">Rather than following this article to the letter, I hope you&#8217;ll take it as <strong>a way of thinking you can apply when you design</strong>.</p>



<p class="wp-block-paragraph">Thank you for reading to the end.</p>

]]></content:encoded>
					
					<wfw:commentRss>https://sugitama-lab.tech/en/solidworks-sketch-constraints/feed/</wfw:commentRss>
			<slash:comments>0</slash:comments>
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">3624</post-id>	</item>
	</channel>
</rss>
