<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	>

<channel>
	<title>for beginners &#8211; Sugitama-Lab.</title>
	<atom:link href="https://sugitama-lab.tech/en/tag/for-beginners/feed/" rel="self" type="application/rss+xml" />
	<link>https://sugitama-lab.tech</link>
	<description>Handy SOLIDWORKS tips, explained</description>
	<lastBuildDate>Tue, 10 Nov 2026 10:03:41 +0000</lastBuildDate>
	<language>en-US</language>
	<sy:updatePeriod>
	hourly	</sy:updatePeriod>
	<sy:updateFrequency>
	1	</sy:updateFrequency>
	

<image>
	<url>https://sugitama-lab.tech/wp-content/uploads/2021/12/cropped-illust_Tool_icon-32x32.png</url>
	<title>for beginners &#8211; Sugitama-Lab.</title>
	<link>https://sugitama-lab.tech</link>
	<width>32</width>
	<height>32</height>
</image> 
<site xmlns="com-wordpress:feed-additions:1">205154850</site>	<item>
		<title>SOLIDWORKS System Options for Better Usability: Recommended Settings</title>
		<link>https://sugitama-lab.tech/en/solidworks-system-options-usability/</link>
					<comments>https://sugitama-lab.tech/en/solidworks-system-options-usability/#respond</comments>
		
		<dc:creator><![CDATA[sugitama]]></dc:creator>
		<pubDate>Mon, 09 Nov 2026 22:42:01 +0000</pubDate>
				<category><![CDATA[settings]]></category>
		<category><![CDATA[business efficiency]]></category>
		<category><![CDATA[for beginners]]></category>
		<category><![CDATA[initial settings]]></category>
		<category><![CDATA[mistake prevention]]></category>
		<category><![CDATA[speed & performance]]></category>
		<guid isPermaLink="false">https://sugitama-lab.tech/?p=3690</guid>

					<description><![CDATA[Recommended SOLIDWORKS System Options for better usability: settings that cut down on operations and prevent input mistakes, with the pros and cons of the ones that trade off against speed.]]></description>
										<content:encoded><![CDATA[
<p class="wp-block-paragraph">Before you start designing in SOLIDWORKS, I recommend setting up the System Options.</p>



<p class="wp-block-paragraph">A well-prepared environment lets you skip some steps, avoid mistakes, and reduce the strain on you. In short, it makes design work more efficient.</p>



<p class="wp-block-paragraph">This article explains the SOLIDWORKS System Options, focusing on the settings that improve usability.</p>



<p class="wp-block-paragraph">The settings are simple, and you can finish them in about five minutes. I hope you will give them a try.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray width_full l icon_red"><figure class="icon"><img decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">This article recommends settings from two angles: cutting down on the number of operations, and preventing input mistakes and missed checks.</p>



<p class="wp-block-paragraph">A few of the settings trade off against processing speed, so I list their pros and cons.</p>
</div></div>



<p class="wp-block-paragraph">If you want to make SOLIDWORKS itself run lighter, see the article below.</p>



<p class="wp-block-paragraph">&nbsp;&nbsp;» <a href="https://sugitama-lab.tech/en/solidworks-performance-optimize/"><strong>SOLIDWORKS Performance Optimization: Settings to Make SOLIDWORKS Run Faster</strong></a></p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">What Are System Options?</h2>



<p class="wp-block-paragraph">System Options are settings that apply every time you use SOLIDWORKS.</p>



<p class="wp-block-paragraph">With them, you can switch many of the features, behaviors, and tools built into SOLIDWORKS on or off.</p>



<p class="wp-block-paragraph">If you tune the System Options well, you get benefits like these:</p>



<ul class="wp-block-list">
<li>Simpler operations mean less mouse movement, which saves working time.</li>



<li>It is easier to see what changed and what you are editing, which helps prevent mistakes.</li>



<li>Fewer missed checks and careless mistakes make your work more stable.</li>
</ul>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray width_full l icon_red"><figure class="icon"><img decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">When your System Options are tuned, there is less stress in your work, and design becomes more enjoyable.</p>
</div></div>



<h2 class="wp-block-heading">Setting Up System Options</h2>



<p class="wp-block-paragraph">To open the System Options, choose <strong>Tools &gt; Options</strong>.</p>



<figure class="wp-block-image size-large"><img fetchpriority="high" decoding="async" width="285" height="990" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/perf-sysopt-open-menu.png" alt="The Tools menu with Options selected" class="wp-image-3560" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/perf-sysopt-open-menu.png 285w, https://sugitama-lab.tech/wp-content/uploads/2026/11/perf-sysopt-open-menu-86x300.png 86w" sizes="(max-width: 285px) 100vw, 285px" /></figure>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">Below are my recommended settings for better usability.</p>



<p class="is-style-supplement-normal wp-block-paragraph">Depending on your version of SOLIDWORKS, some of the options in this article may not exist, or their names and positions may differ. If you cannot find an item, you can simply skip it.</p>



<p class="wp-block-paragraph"><strong>The settings in this article put usability (ease of work and accuracy) first.</strong></p>



<p class="wp-block-paragraph">Some settings improve usability when you switch them on or off (or choose a particular value), but they make processing take longer, which can lower your efficiency overall. I mark those with <strong>[Your call]</strong> at the start of the item, and explain the trade-off.</p>



<p class="wp-block-paragraph">If you would rather give up some convenience for faster processing, see this article instead:</p>



<p class="wp-block-paragraph">&nbsp;&nbsp;» <a href="https://sugitama-lab.tech/en/solidworks-performance-optimize/"><strong>SOLIDWORKS Performance Optimization: Settings to Make SOLIDWORKS Run Faster</strong></a></p>



<p class="wp-block-paragraph">There is no single right answer. Decide based on the size of your models, the specs of your PC, and your own priorities.</p>



<h3 class="wp-block-heading">System Options &gt; General</h3>



<figure class="wp-block-image size-full"><img decoding="async" width="1323" height="668" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-general.png" alt="System Options, General page" class="wp-image-3561" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-general.png 1323w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-general-300x151.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-general-1024x517.png 1024w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-general-768x388.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-general-485x245.png 485w" sizes="(max-width: 1323px) 100vw, 1323px" /></figure>



<ol class="wp-block-list">
<li><strong>Select &#8220;Input dimension value&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">When this is selected, a box for typing the dimension value appears as soon as you place a dimension (SOLIDWORKS calls it the Modify box).</p>



<p class="wp-block-paragraph">You can enter the value right after placing the dimension, which makes the work more efficient.</p>



<ol start="2" class="wp-block-list">
<li><strong>Select &#8220;Automatically edit macro after recording&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">The Visual Basic editor opens right after you record a macro, so you can edit it immediately.</p>



<p class="wp-block-paragraph">When you create a macro, the main flow is to record it and then edit the VBA, so selecting this makes macro editing smoother.</p>



<ol start="3" class="wp-block-list">
<li><strong>Clear &#8220;Enable sounds for SOLIDWORKS events&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">Do the notification sounds that play with every operation bother you?</p>



<p class="wp-block-paragraph">Event sounds are not essential, so turning them off helps you stay focused without being distracted by extra noise.</p>



<ol start="4" class="wp-block-list">
<li><strong>[Your call] Select &#8220;Show thumbnail graphics in Windows Explorer&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">You can check a file’s shape from its thumbnail in Windows Explorer without opening the file.</p>



<p class="wp-block-paragraph">In exchange, SOLIDWORKS has to generate and display the thumbnails, which can make the display slower.</p>



<h3 class="wp-block-heading">System Options &gt; Drawings</h3>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="880" height="668" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-drawings.png" alt="System Options, Drawings page" class="wp-image-3562" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-drawings.png 880w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-drawings-300x228.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-drawings-768x583.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-drawings-485x368.png 485w" sizes="auto, (max-width: 880px) 100vw, 880px" /></figure>



<ol start="5" class="wp-block-list">
<li><strong>Clear &#8220;Disable note/dimension inference&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">When you place a note or dimension, SOLIDWORKS shows guide lines that line it up horizontally or vertically with the notes and dimensions already on the sheet.</p>



<p class="wp-block-paragraph">This makes it easier to produce a neat-looking drawing.</p>



<ol start="6" class="wp-block-list">
<li><strong>Select &#8220;Print out-of-sync water mark&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">If a drawing has not been updated to match its 3D model, a watermark saying so is printed on the drawing.</p>



<p class="wp-block-paragraph">This helps you avoid issuing a drawing that no longer matches the model without noticing.</p>



<ol start="7" class="wp-block-list">
<li><strong>Clear &#8220;Reduce spacing when dimensions are deleted or edited (add or change tolerance, text etc…)&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">This stops other dimensions from moving on their own when you delete or edit a dimension on the drawing.</p>



<ol start="8" class="wp-block-list">
<li><strong>Select &#8220;Reuse view letters from deleted auxiliary, detail, and section views&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">Suppose you have &#8220;Detail A&#8221; and &#8220;Detail B&#8221;, delete &#8220;Detail A&#8221;, and then create a new detail view. With this setting off, the new view gets the next letter, &#8220;Detail C&#8221;, and the lettering ends up with gaps that make the drawing harder to read.</p>



<p class="wp-block-paragraph">With the setting on, the free letter &#8220;A&#8221; is used again, so the labels run in order with no gaps.</p>



<h3 class="wp-block-heading">System Options &gt; Drawings &gt; Performance</h3>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="880" height="668" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-drawings-performance.png" alt="System Options, Drawings, Performance page" class="wp-image-3563" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-drawings-performance.png 880w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-drawings-performance-300x228.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-drawings-performance-768x583.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-drawings-performance-485x368.png 485w" sizes="auto, (max-width: 880px) 100vw, 880px" /></figure>



<ol start="9" class="wp-block-list">
<li><strong>[Your call] Select &#8220;Allow auto-update when opening drawings&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">When you open a drawing, changes made to the model are reflected automatically. This helps you avoid the mistake of forgetting to update and issuing a drawing whose shape differs from the 3D model.</p>



<p class="wp-block-paragraph">On the other hand, an update always runs when you open the drawing, so opening files takes longer.</p>



<h3 class="wp-block-heading">System Options &gt; Colors</h3>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="880" height="676" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-colors.png" alt="System Options, Colors page" class="wp-image-3685" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-colors.png 880w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-colors-300x230.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-colors-768x590.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-colors-485x373.png 485w" sizes="auto, (max-width: 880px) 100vw, 880px" /></figure>



<ol start="10" class="wp-block-list">
<li><strong>Select &#8220;Use specified color for changed drawing dimensions on open&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">You can see the design changes at a glance, even if the drawing and the model were not open at the same time.</p>



<p class="wp-block-paragraph">If you change and save the model while the drawing is closed, and then open the drawing, the changed dimensions are shown in the specified color. (If you hover over one, you can also see its previous value.)</p>



<p class="wp-block-paragraph">When you save the drawing and reopen it, the dimensions return to their normal color.</p>



<ol start="11" class="wp-block-list">
<li><strong>Change the background to your liking</strong></li>
</ol>



<p class="wp-block-paragraph">The <strong>Background</strong> list lets you choose how light or dark the screen is.</p>



<p class="wp-block-paragraph">A change in screen brightness can help reduce eye strain during long working hours. Try it and set what suits you.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray width_full l icon_red"><figure class="icon"><img decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">When changed dimensions are easy to spot, you are less likely to make mistakes or miss a check. Item 11 is purely a matter of taste, so any choice is fine.</p>
</div></div>



<h3 class="wp-block-heading">System Options &gt; Sketch</h3>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="880" height="676" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-sketch.png" alt="System Options, Sketch page" class="wp-image-3686" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-sketch.png 880w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-sketch-300x230.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-sketch-768x590.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-sketch-485x373.png 485w" sizes="auto, (max-width: 880px) 100vw, 880px" /></figure>



<ol start="12" class="wp-block-list">
<li><strong>Select &#8220;Auto-rotate view normal to sketch plane on sketch creation and sketch edit&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">The view turns automatically so that you look straight at the sketch plane, which makes planar sketching easier.</p>



<ol start="13" class="wp-block-list">
<li><strong>Clear &#8220;Use fully defined sketches&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">When this is selected, you cannot exit a sketch until its dimensions and relations are fully defined.</p>



<p class="wp-block-paragraph">That helps you avoid forgetting to fully define a sketch (black lines). But in real work there are times when you want to leave a sketch Under Defined (blue lines), so I clear this option.</p>



<ol start="14" class="wp-block-list">
<li><strong>Select &#8220;Scale sketch on first dimension creation&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">When you add the first dimension to a rough sketch, the whole sketch is scaled to match that dimension value.</p>



<p class="wp-block-paragraph">With the option cleared, entering the first dimension changes only that part, and the proportions against the rest of the sketch can break and distort the shape.</p>



<p class="wp-block-paragraph">With it selected, you can draw the shape first and then set the size all at once with the first dimension.</p>



<ol start="15" class="wp-block-list">
<li><strong>Select &#8220;Enable on screen numeric input on entity creation&#8221;</strong></li>



<li><strong>Select &#8220;Create dimension only when value is entered&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">These two settings go together. With them selected, you can enter a dimension and set its value while you are still drawing the sketch.</p>



<p class="wp-block-paragraph">Normally you draw a line, add a dimension with Smart Dimension, and then type the value. With these settings you can enter the dimension as you draw the line, which shortens sketching time.</p>



<ol start="17" class="wp-block-list">
<li><strong>Select &#8220;Preview sketch dimension when selected&#8221; (available in SOLIDWORKS 2024 and later)</strong></li>
</ol>



<p class="wp-block-paragraph">You do not need a dimension command: just select a sketch entity, and a preview of its dimension appears that you can click to type a value.</p>



<p class="wp-block-paragraph">This lets you dimension and constrain sketches efficiently and intuitively.</p>



<h3 class="wp-block-heading">System Options &gt; Display</h3>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="880" height="668" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-display.png" alt="System Options, Display page" class="wp-image-3564" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-display.png 880w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-display-300x228.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-display-768x583.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-display-485x368.png 485w" sizes="auto, (max-width: 880px) 100vw, 880px" /></figure>



<ol start="18" class="wp-block-list">
<li><strong>[Your call] Select &#8220;Dynamic highlight from graphics view&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">This highlights an edge or face when you move the mouse cursor over it, before you click.</p>



<p class="wp-block-paragraph">The highlight is calculated in real time every time the cursor moves, so with large assemblies and other heavy models it can make the display <strong>stutter</strong>.</p>



<h3 class="wp-block-heading">System Options &gt; Performance</h3>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="880" height="668" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-performance.png" alt="System Options, Performance page" class="wp-image-3565" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-performance.png 880w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-performance-300x228.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-performance-768x583.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-performance-485x368.png 485w" sizes="auto, (max-width: 880px) 100vw, 880px" /></figure>



<ol start="19" class="wp-block-list">
<li><strong>[Your call] Select &#8220;Verification on rebuild (enable advanced body checking)&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">Every time the model is rebuilt, SOLIDWORKS runs an additional check for problems such as inconsistent geometry. You can catch model problems early, which helps you avoid designing on without noticing them.</p>



<p class="wp-block-paragraph">The time taken by that check is added to every rebuild.</p>



<ol start="20" class="wp-block-list">
<li><strong>[Your call] Set &#8220;Mate animation speed&#8221; to Fast</strong></li>
</ol>



<p class="wp-block-paragraph">When you apply a mate in an assembly, you can watch the animation of how the part moves into position. Because you can see whether it assembled in the intended orientation and position, you are less likely to miss a wrong mate.</p>



<p class="wp-block-paragraph">If the operation feels sluggish, turning the animation off may improve performance.</p>



<h3 class="wp-block-heading">System Options &gt; Assemblies</h3>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="880" height="668" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-assemblies.png" alt="System Options, Assemblies page" class="wp-image-3566" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-assemblies.png 880w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-assemblies-300x228.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-assemblies-768x583.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-assemblies-485x368.png 485w" sizes="auto, (max-width: 880px) 100vw, 880px" /></figure>



<ol start="21" class="wp-block-list">
<li><strong>Select &#8220;Move components by dragging&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">Within the remaining degrees of freedom (the directions the part can still move), you can drag a part or subassembly with the mouse to move it.</p>



<p class="wp-block-paragraph">You do not have to call up a move command each time, so you can move parts intuitively.</p>



<ol start="22" class="wp-block-list">
<li><strong>[Your call] Select &#8220;Update model graphics when saving files&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">This updates the model’s display data (graphics data) to the latest state whenever you save an assembly.</p>



<p class="wp-block-paragraph">If that display data is out of date, you may see the pre-change shape when you open the assembly in lightweight mode (a mode that loads only part of each component’s data so it opens faster), or in another viewer such as eDrawings.</p>



<p class="wp-block-paragraph">With this selected, the data is refreshed at every save, which helps prevent the mismatch of opening a file and finding an old shape. Refreshing the data at every save may add to the save time, so decide based on how large your assemblies are.</p>



<h3 class="wp-block-heading">System Options &gt; External References</h3>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="880" height="668" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-external-references.png" alt="System Options, External References page" class="wp-image-3567" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-external-references.png 880w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-external-references-300x228.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-external-references-768x583.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-external-references-485x368.png 485w" sizes="auto, (max-width: 880px) 100vw, 880px" /></figure>



<ol start="23" class="wp-block-list">
<li><strong>Clear &#8220;Don’t prompt to save read-only referenced documents (discard changes)&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">You may edit a file without noticing that it was opened read-only.</p>



<p class="wp-block-paragraph">With this option cleared, SOLIDWORKS warns you that the file is open read-only, which helps you avoid losing the edits you made.</p>



<ol start="24" class="wp-block-list">
<li><strong>Select &#8220;Update component names when documents are replaced&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">When you swap a part in an assembly with the Replace command, the name in the tree is updated to the new file name automatically.</p>



<ol start="25" class="wp-block-list">
<li><strong>Clear &#8220;Force referenced document to save to the same version as the parent document.&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">Suppose you open and save an assembly made in an older version of SOLIDWORKS. With this option selected, all the parts and subassemblies in the assembly are converted to the current version and saved, including files you did not edit.</p>



<p class="wp-block-paragraph">With the option cleared, only the files you edited are saved in the current version, and the referenced files you did not touch stay in their original version.</p>



<p class="wp-block-paragraph">This can shorten save times. It also helps when you share files with someone who uses an older version of SOLIDWORKS: you will not accidentally upgrade a file to a version they cannot open.</p>



<h3 class="wp-block-heading">System Options &gt; FeatureManager</h3>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="880" height="682" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-featuremanager.png" alt="System Options, FeatureManager page" class="wp-image-3568" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-featuremanager.png 880w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-featuremanager-300x232.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-featuremanager-768x595.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-featuremanager-485x376.png 485w" sizes="auto, (max-width: 880px) 100vw, 880px" /></figure>



<ol start="26" class="wp-block-list">
<li><strong>Select &#8220;Scroll selected item into view&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">When you click a part or face in the 3D model, the matching item in the FeatureManager design tree (the list of parts and features on the left side of the screen) scrolls into view and is highlighted.</p>



<p class="wp-block-paragraph">In an assembly, you do not have to hunt for &#8220;which part in the tree is this?&#8221;</p>



<ol start="27" class="wp-block-list">
<li><strong>[Your call] Select &#8220;Dynamic highlight&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">When you move the mouse cursor over an edge, a face, or an item in the FeatureManager design tree, the target is highlighted before you click.</p>



<p class="wp-block-paragraph">It helps you avoid mistakes such as clicking and finding you selected a different face than you meant.</p>



<p class="wp-block-paragraph">However, the highlight is calculated in real time every time the cursor moves, so <strong>SOLIDWORKS can become sluggish</strong>.</p>



<h3 class="wp-block-heading">System Options &gt; View</h3>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="880" height="690" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-view.png" alt="System Options, View page" class="wp-image-3687" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-view.png 880w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-view-300x235.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-view-768x602.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-view-485x380.png 485w" sizes="auto, (max-width: 880px) 100vw, 880px" /></figure>



<ol start="28" class="wp-block-list">
<li><strong>Select &#8220;Reverse mouse wheel zoom direction&#8221;</strong></li>
</ol>



<p class="wp-block-paragraph">Turning the mouse wheel zooms a 3D model or a drawing in and out.</p>



<p class="wp-block-paragraph">The default zoom direction in SOLIDWORKS may feel opposite to what you are used to in other apps, such as Excel, so some people find it awkward.</p>



<p class="wp-block-paragraph">If you select this option, the wheel direction can match those apps, which makes it easier to use. (Which direction feels natural is a matter of habit, so skip this if the default suits you.)</p>



<h3 class="wp-block-heading">System Options &gt; Backup/Recover/Version</h3>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="880" height="690" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-backup-recover.png" alt="System Options, Backup/Recover/Version page" class="wp-image-3688" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-backup-recover.png 880w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-backup-recover-300x235.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-backup-recover-768x602.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-backup-recover-485x380.png 485w" sizes="auto, (max-width: 880px) 100vw, 880px" /></figure>



<ol start="29" class="wp-block-list">
<li><strong>Select &#8220;Save auto-recover information every:&#8221; and enter the interval you want</strong></li>
</ol>



<p class="wp-block-paragraph">When you work with several large files open, or run complex operations, SOLIDWORKS can crash or freeze.</p>



<p class="wp-block-paragraph">To protect the file you are editing in such cases, I recommend saving auto-recover information.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray width_full l icon_red"><figure class="icon"><img decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">Unfortunately, SOLIDWORKS can freeze or shut down unexpectedly.</p>



<p class="wp-block-paragraph">I set mine to 20 minutes, since I can live with redoing about that much work, including the mental cost.</p>
</div></div>



<p class="wp-block-paragraph">Each auto-save makes SOLIDWORKS slower for a moment, so do not set the interval too short.</p>



<p class="is-style-supplement-warning wp-block-paragraph">Even with auto-save enabled, there are cases where nothing is saved automatically.<br><strong>Saving as you edit</strong> is the best protection.</p>



<h3 class="wp-block-heading">System Options &gt; Messages/Errors/Warnings</h3>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="880" height="682" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-messages-errors-warnings.png" alt="System Options, Messages/Errors/Warnings page" class="wp-image-3569" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-messages-errors-warnings.png 880w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-messages-errors-warnings-300x232.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-messages-errors-warnings-768x595.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/system-options-messages-errors-warnings-485x376.png 485w" sizes="auto, (max-width: 880px) 100vw, 880px" /></figure>



<ol start="30" class="wp-block-list">
<li><strong>Select &#8220;Remind me when a document has not been saved for:&#8221; and enter the time you want</strong></li>



<li><strong>Select &#8220;Automatically dismiss notifications after:&#8221; and enter the time you want</strong></li>
</ol>



<p class="wp-block-paragraph">If you keep editing a file and the time you entered passes without a save, a message prompting you to save appears at the lower right of the screen.</p>



<p class="wp-block-paragraph">This reminder should not cost as much as saving auto-recover information, so a shorter interval than the auto-save interval should be fine.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray width_full l icon_red"><figure class="icon"><img decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">The messages can feel a little annoying, but they keep you from forgetting to save, so I recommend setting them up.</p>



<p class="wp-block-paragraph">Honestly, they do not get in the way much.</p>
</div></div>



<h2 class="wp-block-heading">Bonus: Document Properties</h2>



<p class="wp-block-paragraph">Finally, here is a setting that helps prevent mistakes with overridden dimensions.</p>



<p class="wp-block-paragraph">Document Properties are set from the <strong>Document Properties</strong> tab of <strong>Tools &gt; Options</strong>. Open a file first, and then set the Document Properties.</p>



<ol start="32" class="wp-block-list">
<li><strong>Select the option that highlights overridden dimensions in a different color (found on the Dimensions page; available in SOLIDWORKS 2024 and later)</strong></li>
</ol>



<p class="wp-block-paragraph">Overridden dimensions (dimensions whose displayed value has been typed over instead of measured from the model) are shown in a different color. You can see at a glance which dimensions are temporarily or provisionally overridden, which helps you avoid unpleasant surprises.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray width_full l icon_red"><figure class="icon"><img decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">Used together with the System Options &gt; Colors settings, this makes changes even easier to spot.</p>
</div></div>



<h2 class="wp-block-heading">Summary</h2>



<p class="wp-block-paragraph">This article explained the SOLIDWORKS System Options, especially the settings that improve usability.</p>



<p class="wp-block-paragraph">Setting up your environment before you start real design work can reduce effort and help prevent mistakes.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray width_full l icon_red"><figure class="icon"><img decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">If you have recommended settings that I did not cover, I would be glad if you shared them in the comments.</p>
</div></div>



<p class="is-style-supplement-normal wp-block-paragraph">If you care more about the processing speed of SOLIDWORKS itself than about usability, see this article: <a href="https://sugitama-lab.tech/en/solidworks-performance-optimize/"><strong>SOLIDWORKS Performance Optimization: Settings to Make SOLIDWORKS Run Faster</strong></a></p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">Thank you for reading to the end.</p>
]]></content:encoded>
					
					<wfw:commentRss>https://sugitama-lab.tech/en/solidworks-system-options-usability/feed/</wfw:commentRss>
			<slash:comments>0</slash:comments>
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">3690</post-id>	</item>
		<item>
		<title>SOLIDWORKS Mouse Gestures: How to Customize Them and My Recommended Setup</title>
		<link>https://sugitama-lab.tech/en/solidworks-mouse-gestures-setup/</link>
					<comments>https://sugitama-lab.tech/en/solidworks-mouse-gestures-setup/#respond</comments>
		
		<dc:creator><![CDATA[sugitama]]></dc:creator>
		<pubDate>Mon, 09 Nov 2026 22:41:59 +0000</pubDate>
				<category><![CDATA[Tips & Features]]></category>
		<category><![CDATA[for beginners]]></category>
		<category><![CDATA[initial settings]]></category>
		<category><![CDATA[makers]]></category>
		<category><![CDATA[students & education]]></category>
		<guid isPermaLink="false">https://sugitama-lab.tech/?p=3683</guid>

					<description><![CDATA[Mouse gestures put your most-used SOLIDWORKS commands under the cursor. Learn how to set them up, and see the 4-gesture setup I use for parts, assemblies, sketches, and drawings.]]></description>
										<content:encoded><![CDATA[
<p class="wp-block-paragraph">When you model and draw in SOLIDWORKS, I recommend getting to know <strong>mouse gestures</strong>.</p>



<p class="wp-block-paragraph">With mouse gestures, the cursor travels a much shorter distance to reach a command, so you spend less time reaching for toolbars. That may also take some load off the wrist that handles the mouse.</p>



<p class="wp-block-paragraph">Mouse gestures already work with the default settings. But if you put the commands <em>you</em> use most into them, they become far more useful.</p>



<p class="wp-block-paragraph">This article explains how to set up mouse gestures, and shows the setup I use myself.</p>



<p class="wp-block-paragraph">The setup itself takes only a few minutes.</p>



<p class="wp-block-paragraph">Let&#8217;s get started.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">What Are Mouse Gestures?</h2>



<p class="wp-block-paragraph">Mouse gestures are a feature that appears when you <strong>right-drag</strong> (hold the right mouse button and move the mouse) in the SOLIDWORKS graphics area, the large area where your model is displayed.</p>



<p class="wp-block-paragraph">A ring of command buttons (the <strong>mouse gesture guide</strong>) appears around the cursor. Just slide the cursor toward a button, and that command starts.</p>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="322" height="308" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/mouse-gesture-wheel-en.png" alt="Mouse gesture guide: a ring of command buttons appears around the cursor when you right-drag" class="wp-image-3679" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/mouse-gesture-wheel-en.png 322w, https://sugitama-lab.tech/wp-content/uploads/2026/11/mouse-gesture-wheel-en-300x287.png 300w" sizes="auto, (max-width: 322px) 100vw, 322px" /></figure>



<p class="wp-block-paragraph">With the default settings, the mouse gestures in a part or assembly look like the figure above.</p>



<p class="wp-block-paragraph">If you put your frequently used commands into mouse gestures, you no longer have to move the mouse all the way to the toolbar every time. That saves time.</p>



<p class="wp-block-paragraph">Mouse work also adds up over a day of design. Some people report wrist problems from heavy mouse use, and fewer long cursor movements may help. I do not know how much, but it could be a side benefit.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">You can set mouse gestures separately for <strong>Part, Assembly, Sketch, and Drawing</strong>. (Part, Assembly, and Drawing are document types. Sketch is the mode you are in while editing a sketch.)</p>



<p class="wp-block-paragraph">This is because each of these has its own commands you use most. You might put Extruded Boss/Base in the part gestures, and Smart Dimension in the sketch gestures.</p>



<p class="wp-block-paragraph">To me, mouse gestures are one of the handiest features in SOLIDWORKS.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">How to Set Up Mouse Gestures</h2>



<p class="is-style-supplement-warning wp-block-paragraph">The images in this article are based on SOLIDWORKS for Makers (2022). Other versions can look a little different. For example, in SOLIDWORKS 2017 the dialog was laid out as a grid, and only 4 and 8 gestures were available.</p>



<h3 class="wp-block-heading">Open the Mouse Gestures Settings</h3>



<ol class="wp-block-list">
<li>Open any file in SOLIDWORKS.</li>



<li>Choose <strong>Tools &gt; Customize</strong>.</li>



<li>Click the <strong>Mouse Gestures</strong> tab. The mouse gesture guide window appears to the right of the dialog.</li>
</ol>



<p class="wp-block-paragraph">Here is what each setting does.</p>



<h5 class="wp-block-heading">1. Turn on mouse gestures</h5>



<p class="wp-block-paragraph">Select <strong>Enable mouse gestures</strong>. This turns the feature on. (It is probably already selected by default.)</p>



<h5 class="wp-block-heading">2. Choose the number of gestures</h5>



<p class="wp-block-paragraph">This sets how many commands are arranged around the ring. The default is four.</p>



<p class="wp-block-paragraph">You can choose from six layouts: 2 gestures (vertical), 2 gestures (horizontal), 3, 4, 8, and 12 gestures. The figure below shows how the commands are arranged in each one.</p>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="1506" height="1067" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/mouse-gesture-layouts-en.png" alt="The mouse gesture guide layouts for 2 (vertical), 2 (horizontal), 3, 4, 8, and 12 gestures in Part, Sketch, Assembly, and Drawing" class="wp-image-3680" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/mouse-gesture-layouts-en.png 1506w, https://sugitama-lab.tech/wp-content/uploads/2026/11/mouse-gesture-layouts-en-300x213.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/mouse-gesture-layouts-en-1024x726.png 1024w, https://sugitama-lab.tech/wp-content/uploads/2026/11/mouse-gesture-layouts-en-768x544.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/mouse-gesture-layouts-en-485x344.png 485w" sizes="auto, (max-width: 1506px) 100vw, 1506px" /></figure>



<p class="wp-block-paragraph">The more gestures you use, the more commands you can reach. But it takes longer to get used to them, and you are more likely to pick the wrong one.</p>



<h5 class="wp-block-heading">3. Narrow the command list by category</h5>



<p class="wp-block-paragraph">The list of commands on the left shows every command available in SOLIDWORKS when the category is set to all commands.</p>



<p class="wp-block-paragraph">If there are too many commands and you cannot find the one you want, change the category (or use the search box). The list narrows down and becomes easier to scan.</p>



<h5 class="wp-block-heading">4. Drag a command onto the guide</h5>



<p class="wp-block-paragraph">From the list, <strong>drag</strong> the command you want and <strong>drop</strong> it on the position you want in the mouse gesture guide on the right. If you drop it on an empty position, the command is added. If you drop it on an occupied position, it replaces the command that was there.</p>



<p class="wp-block-paragraph">Do this for each of Part, Assembly, Sketch, and Drawing to build the layout you want.</p>



<h5 class="wp-block-heading">5. Click OK</h5>



<p class="wp-block-paragraph">Click <strong>OK</strong> to finish.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">My Recommended Mouse Gesture Setup</h2>



<p class="wp-block-paragraph">Here is the setup I use. If you are not sure which commands to assign, or you do not want to spend time deciding, feel free to copy it. If you already use mouse gestures, I hope it gives you some ideas for your own.</p>



<h3 class="wp-block-heading">I Recommend Starting with 4 Gestures</h3>



<p class="wp-block-paragraph">I recommend starting with <strong>4 gestures</strong>.</p>



<p class="wp-block-paragraph">In my opinion, four commands are enough to be useful, and the layout leaves room to grow. Two or three gestures feel a little limiting, while eight is a lot of positions to memorize.</p>



<p class="wp-block-paragraph">With four gestures, you learn the positions as you use them. Soon you can start a command before the guide even appears, and move quickly through modeling and sketching.</p>



<p class="wp-block-paragraph">Four gestures use only <strong>vertical and horizontal</strong> movements. Even if two gestures would be enough for you, setting up four costs little, and straight up, down, left, and right movements are easy to tell apart, so you are less likely to trigger the wrong one than with diagonal movements.</p>



<p class="wp-block-paragraph">If you later want more commands, you can move up to eight gestures, which adds the 45-degree diagonals. If you are already used to four gestures, the switch should go smoothly. (For that reason, I would not choose three gestures.)</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Here Is My Setup</h3>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="502" height="532" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/mouse-gesture-recommended-en.png" alt="My recommended 4-gesture setup for Part, Sketch, Assembly, and Drawing" class="wp-image-3681" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/mouse-gesture-recommended-en.png 502w, https://sugitama-lab.tech/wp-content/uploads/2026/11/mouse-gesture-recommended-en-283x300.png 283w, https://sugitama-lab.tech/wp-content/uploads/2026/11/mouse-gesture-recommended-en-485x514.png 485w" sizes="auto, (max-width: 502px) 100vw, 502px" /></figure>



<p class="wp-block-paragraph">The command in each direction is listed below. (&#8593; means moving the cursor up, &#8595; down, &#8592; left, and &#8594; right.)</p>



<figure class="wp-block-table"><table class="has-fixed-layout"><thead><tr><th>Mode</th><th>&#8593; Up</th><th>&#8595; Down</th><th>&#8592; Left</th><th>&#8594; Right</th></tr></thead><tbody><tr><td><strong>Part</strong></td><td>Measure</td><td>Trimetric</td><td>Hole Wizard</td><td>Sketch</td></tr><tr><td><strong>Assembly</strong></td><td>Measure</td><td>Trimetric</td><td>Mate</td><td>Insert Components</td></tr><tr><td><strong>Drawing</strong></td><td>Smart Dimension</td><td>Zoom to Sheet</td><td>Hole Callout</td><td>Note</td></tr><tr><td><strong>Sketch</strong></td><td>Smart Dimension</td><td>Corner Rectangle</td><td>Line</td><td>Circle</td></tr></tbody></table></figure>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">Here is my reasoning.</p>



<p class="wp-block-paragraph"><strong>Down in Part, Assembly, and Drawing</strong> is a view command: Trimetric (an angled 3D view) in a part or assembly, and Zoom to Sheet in a drawing. When I finish looking at one area in detail and want to move on to another, switching to a familiar view first makes it easier to see where to go next.</p>



<p class="wp-block-paragraph"><strong>Up</strong> is a dimension or measurement command in every mode. During design work I often check clearances and spaces between parts, so I assigned <strong>Measure</strong> and <strong>Smart Dimension</strong>.</p>



<p class="wp-block-paragraph">For the rest, I assigned commands I tend to use in each mode:</p>



<ul class="wp-block-list">
<li><strong>Part:</strong> Sketch and Hole Wizard</li>



<li><strong>Assembly:</strong> Insert Components and Mate</li>



<li><strong>Drawing:</strong> Hole Callout and Note</li>



<li><strong>Sketch:</strong> Line, Corner Rectangle, and Circle</li>
</ul>



<p class="wp-block-paragraph">I also tried to put similar functions in the same direction in every mode, so the gestures are easier to remember.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">Summary</h2>



<p class="wp-block-paragraph">This article explained SOLIDWORKS mouse gestures: how to customize them, and the setup I recommend.</p>



<p class="wp-block-paragraph">Once you get used to mouse gestures, they can save you a lot of mouse travel in everyday SOLIDWORKS work. If you have not tried them yet, they are worth a few minutes.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">Mouse gesture settings are also quite personal, and they vary from designer to designer.</p>



<p class="wp-block-paragraph">That is why I am curious about what other people have set up, and which commands they use.</p>



<p class="wp-block-paragraph">If you have a setup you like, I would love to hear about it in the comments.</p>



<p class="wp-block-paragraph">Thank you for reading to the end.</p>

]]></content:encoded>
					
					<wfw:commentRss>https://sugitama-lab.tech/en/solidworks-mouse-gestures-setup/feed/</wfw:commentRss>
			<slash:comments>0</slash:comments>
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">3683</post-id>	</item>
		<item>
		<title>SOLIDWORKS File Management: Pitfalls to Avoid and How to Manage Your Files</title>
		<link>https://sugitama-lab.tech/en/solidworks-file-management-tips/</link>
					<comments>https://sugitama-lab.tech/en/solidworks-file-management-tips/#respond</comments>
		
		<dc:creator><![CDATA[sugitama]]></dc:creator>
		<pubDate>Mon, 09 Nov 2026 22:41:55 +0000</pubDate>
				<category><![CDATA[settings]]></category>
		<category><![CDATA[file management]]></category>
		<category><![CDATA[for beginners]]></category>
		<category><![CDATA[initial settings]]></category>
		<guid isPermaLink="false">https://sugitama-lab.tech/?p=3674</guid>

					<description><![CDATA[SOLIDWORKS files are quirky: rename or move one carelessly and your assemblies lose their links. Learn the pitfalls to avoid and how to manage your files safely.]]></description>
										<content:encoded><![CDATA[
<p class="wp-block-paragraph">If you use SOLIDWORKS, you probably appreciate how convenient it is as a CAD tool. But you have probably also run into the other side of it.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">SOLIDWORKS can be pretty quirky!</p>
</div></div>



<p class="wp-block-paragraph">Things do not always work the way you would expect. One of the clearest examples is <strong>file management</strong>.</p>



<p class="wp-block-paragraph">Maybe a file name was changed without you noticing, and an assembly then showed errors about missing references (broken links to its parts).</p>



<p class="wp-block-paragraph">Repairing files takes time and effort, so you want to prevent that kind of trouble whenever you can.</p>



<p class="wp-block-paragraph">This article explains the points to watch when you handle SOLIDWORKS files, and how to manage them.</p>



<p class="wp-block-paragraph">If you know the quirks of SOLIDWORKS files, you can avoid errors before they happen and save yourself a lot of rework.</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_ttl"><div class="box_title"><span class="span__box_title">Pitfalls to Watch For</span></div><div class="cboxcomment">
<ul class="wp-block-list">
<li>Once you save a file, do not rename it or move its folder (if you can help it).</li>



<li>Save the model file and its drawing file in the same folder, with the same name.</li>



<li>Use plain letters, numbers, hyphens, and underscores in file names.</li>



<li>A rename updates an assembly only if that assembly is open at the time.</li>



<li>Do not save files with the same name in different folders.</li>
</ul>
</div></div>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_ttl"><div class="box_title"><span class="span__box_title">How to Manage Your Files</span></div><div class="cboxcomment">
<ul class="wp-block-list">
<li>Do not rename or move SOLIDWORKS files in Windows File Explorer. Use SOLIDWORKS File Utilities instead.</li>



<li>Set rules for where to save files and how to name them.</li>
</ul>
</div></div>



<p class="wp-block-paragraph">If you work with SOLIDWORKS files without knowing these points, you may end up with a lot of errors and spend a lot of time fixing them.</p>



<p class="wp-block-paragraph">So if you are a beginner, I especially recommend reading to the end.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">Pitfalls (Quirks) of SOLIDWORKS File Management</h2>



<p class="wp-block-paragraph">File management in SOLIDWORKS is very quirky.</p>



<p class="wp-block-paragraph">If you move folders or rename files without knowing this, repairing the data can take a lot of time, and in the worst case you may not be able to open the files at all.</p>



<p class="wp-block-paragraph">Let&#8217;s start with the quirks themselves.</p>



<h3 class="wp-block-heading">Once You Save a File, Do Not Rename It or Move Its Folder</h3>



<p class="wp-block-paragraph">After you save a SOLIDWORKS file, I recommend that you do not rename it, move it to another folder, or rename the folder.</p>



<p class="wp-block-paragraph">In SOLIDWORKS, you can insert other files into an assembly or a part file.</p>



<p class="wp-block-paragraph">For example, you can insert part files and other assemblies into an assembly. You can also insert other parts into a part.</p>



<p class="wp-block-paragraph">The inserted parts and assemblies are linked by their <strong>folder hierarchy and file names</strong>. (These links are called <strong>references</strong>.)</p>



<p class="wp-block-paragraph">If you change a file name or a folder name, the reference is broken.</p>



<p class="wp-block-paragraph">So unless you have a good reason, it is wise not to rename or move a file once you have saved it.</p>



<p class="wp-block-paragraph">The first time you save, check the save location and the file name carefully before you save.</p>



<p class="wp-block-paragraph">Save your files on the assumption that you will not rename or move them.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Save the Model File and the Drawing File in the Same Folder, with the Same Name</h3>



<p class="wp-block-paragraph">It is best to save the 3D model you created in SOLIDWORKS and the drawing file made from it <strong>in the same folder</strong>.</p>



<p class="wp-block-paragraph">This comes from the parent-child relationship between the files.</p>



<p class="wp-block-paragraph">In SOLIDWORKS, a drawing is created from a 3D model, so the 3D model is the <strong>parent</strong> and the drawing is the <strong>child</strong>.</p>



<p class="wp-block-paragraph">The drawing refers to the 3D model, so it is easy to open the model from the drawing. (In the FeatureManager design tree of the drawing, right-click the model under the drawing view and choose <strong>Open Part</strong> or <strong>Open Assembly</strong>.)</p>



<p class="wp-block-paragraph">You can also open the drawing from the 3D model (right-click the model and choose <strong>Open Drawing</strong>). Strictly speaking, though, this means &quot;you can open the drawing that has the <strong>same name</strong> and is in the <strong>same folder</strong> as the 3D model.&quot;</p>



<p class="wp-block-paragraph">If the drawing is saved under a different name than the 3D model, or in a different folder, you cannot open the drawing from the 3D model.</p>



<p class="wp-block-paragraph">So I recommend saving the model file and the drawing file in the same folder, and under the same name.</p>



<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="1960" height="867" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/file-structure-same-name-en.png" alt="Folder tree diagram showing a part file and its drawing file saved with the same name in the same folder" class="wp-image-3672" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/file-structure-same-name-en.png 1960w, https://sugitama-lab.tech/wp-content/uploads/2026/11/file-structure-same-name-en-300x133.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/file-structure-same-name-en-1024x453.png 1024w, https://sugitama-lab.tech/wp-content/uploads/2026/11/file-structure-same-name-en-768x340.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/file-structure-same-name-en-1536x679.png 1536w, https://sugitama-lab.tech/wp-content/uploads/2026/11/file-structure-same-name-en-485x215.png 485w" sizes="auto, (max-width: 1960px) 100vw, 1960px" /></figure>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">Save the model file and the drawing file under the same name, so that you can open the drawing from the 3D model.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Use Plain Letters and Numbers in File Names</h3>



<p class="wp-block-paragraph">When you name files, it is best to stick to plain letters, numbers, hyphens, and underscores (basic ASCII characters).</p>



<p class="wp-block-paragraph">This was a problem in older versions of SOLIDWORKS: when a file name or folder name contained certain double-byte characters (such as Japanese characters), errors could occur, such as being unable to open the file.</p>



<p class="wp-block-paragraph">This has improved in recent versions, and you rarely see it now.</p>



<p class="wp-block-paragraph">However, many workplaces still use older versions of SOLIDWORKS, and you may need to hand files to suppliers or customers.</p>



<p class="wp-block-paragraph">It is an error that is easy to avoid, so I recommend using plain letters and numbers in file names.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">To avoid errors, stick to plain letters and numbers in file names.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">A Rename Updates an Assembly Only If the Assembly Is Open</h3>



<p class="wp-block-paragraph">Suppose there is an assembly file named &quot;Assy-A&quot;, and one of its components is a part file named &quot;Part-B&quot;. Let&#8217;s say you want to rename &quot;Part-B&quot; to &quot;Part-C&quot;.</p>



<p class="wp-block-paragraph">In this case, the result is different depending on whether &quot;Assy-A&quot; is open in SOLIDWORKS or not.</p>



<h4 class="wp-block-heading">Example 1: Renaming while Assy-A is open</h4>



<p class="wp-block-paragraph">With &quot;Assy-A&quot; open in SOLIDWORKS, you open &quot;Part-B&quot; from the assembly (right-click it and choose <strong>Open Part</strong>) and rename it using <strong>File &gt; Save As</strong>. The component in Assy-A is automatically replaced from Part-B with Part-C.</p>



<p class="wp-block-paragraph">Renaming a component while Assy-A is open is reflected automatically. (Assy-A gets an asterisk (*) to show that it has been edited, so save Assy-A to keep the change.)</p>



<p class="wp-block-paragraph">In other words, <strong>the reference is kept</strong>.</p>



<h4 class="wp-block-heading">Example 2: Renaming without opening Assy-A</h4>



<p class="wp-block-paragraph">Suppose you open only &quot;Part-B&quot; in SOLIDWORKS, without opening &quot;Assy-A&quot;, and rename it with <strong>Save As</strong>. The component in Assy-A is still Part-B.</p>



<p class="wp-block-paragraph">When you open Assy-A in SOLIDWORKS later, a message saying that Part-B cannot be found appears.</p>



<p class="wp-block-paragraph">The reference inside Assy-A still points to Part-B, so <strong>the reference is not kept</strong>.</p>



<p class="wp-block-paragraph">If the model you want to rename is referenced by other models, whether the references are kept depends on whether the referencing models are open or closed.</p>



<p class="wp-block-paragraph">Decide before you save whether you want to keep the references or not, and choose the process accordingly.</p>



<p class="is-style-supplement-normal wp-block-paragraph">If no other file (assembly, part, or drawing) refers to a part, nothing else is affected, so you can rename it any way you like.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Do Not Save Files with the Same Name in Different Folders</h3>



<p class="wp-block-paragraph">In SOLIDWORKS, avoid saving files under the same name, even when they are in different folders.</p>



<p class="wp-block-paragraph">When you create a design variant, you may build another model from a base 3D model.</p>



<p class="wp-block-paragraph">One way is to keep the file name and just change the folder you save to, but this is <strong>not recommended</strong>.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">When the file names are the same, a file from the wrong folder often gets loaded by accident.</p>



<p class="wp-block-paragraph">You lose track of which one you are editing, and that is how trouble starts.</p>
</div></div>



<p class="wp-block-paragraph">When you create a variant model, always change the file name when you save.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">How to Manage SOLIDWORKS Files</h2>



<p class="wp-block-paragraph">As described above, SOLIDWORKS files are very quirky.</p>



<p class="wp-block-paragraph">If you keep moving folders and renaming files without thinking, you may reach a point where you cannot repair the models.</p>



<p class="wp-block-paragraph">Still, there will be times when you need to move or rename files.</p>



<p class="wp-block-paragraph">Here is how to manage SOLIDWORKS files properly. Managing files this way helps you prevent trouble and errors.</p>



<h3 class="wp-block-heading">Use SOLIDWORKS File Utilities When You Rename or Move Files</h3>



<p class="wp-block-paragraph">When you handle SOLIDWORKS files, do not rename or move them in Windows File Explorer.</p>



<p class="wp-block-paragraph">Use <strong>SOLIDWORKS File Utilities</strong> instead. It lets you rename, replace, and move SOLIDWORKS files while it tries to keep the references between them. This is exactly the situation in Example 2 above.</p>



<p class="wp-block-paragraph">You use it from the right-click menu in File Explorer: right-click a SOLIDWORKS file, choose <strong>SOLIDWORKS</strong>, pick a File Utilities command such as <strong>Rename</strong> or <strong>Move</strong>, and enter the new name or location. (On Windows 11, you may need to select <strong>Show more options</strong> first. If the menu is missing, File Utilities may not be installed, and you can add it with the SOLIDWORKS Installation Manager.)</p>



<p class="is-style-supplement-normal wp-block-paragraph">File Utilities replaced <strong>SOLIDWORKS Explorer</strong>, a separate file management application that was retired in SOLIDWORKS 2020. If you find older articles about SOLIDWORKS Explorer, use File Utilities instead (unless you still use SOLIDWORKS 2019 or earlier). See <a href="https://help.solidworks.com/2020/english/WhatsNew/c_explorer_replaced_by_utilities.htm" target="_blank" rel="noreferrer noopener">SOLIDWORKS Explorer replaced by SOLIDWORKS File Utilities</a> and <a href="https://help.solidworks.com/2025/english/SolidWorks/sldworks/c_solidworks_file_utilities.htm" target="_blank" rel="noreferrer noopener">SOLIDWORKS File Utilities</a> in the SOLIDWORKS Help.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Set Rules for Where to Save Files and How to Name Them</h3>



<p class="wp-block-paragraph">As I said before, it is best to save SOLIDWORKS files on the assumption that you will not rename them or move their folders.</p>



<p class="wp-block-paragraph">You can rename or move them afterward with File Utilities, but that takes time and effort.</p>



<p class="wp-block-paragraph">To avoid unnecessary work, I recommend setting clear rules for saving files.</p>



<p class="wp-block-paragraph">For example: &quot;Name files as <strong>ProjectName_PartName_RevisionNumber</strong>,&quot; or &quot;Save part files in a folder hierarchy of <strong>project name &gt; assembly name &gt; part</strong>.&quot; (If you put the revision number in the file name, every new revision means a rename, which goes against the first rule above. Think about whether it belongs in the name.)</p>



<p class="wp-block-paragraph">It is best to choose file names and a folder hierarchy that let other people understand what each part or assembly is just by looking at the names.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">Summary</h2>



<p class="wp-block-paragraph">This article explained the points to watch in SOLIDWORKS file management, and how to manage files.</p>



<p class="wp-block-paragraph">Here is the summary of SOLIDWORKS file management.</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_simple"><div class="box_title"><span class="span__box_title">SOLIDWORKS File Management at a Glance</span></div><div class="cboxcomment">
<ul class="wp-block-list">
<li>Once you save a file, do not rename it or move its folder (if you can help it).</li>



<li>Save the model data and the drawing data in the same folder, with the same name.</li>



<li>Use plain letters, numbers, hyphens, and underscores in file names.</li>



<li>A rename updates an assembly only if that assembly is open at the time.</li>



<li>Do not rename or move files in File Explorer. Use SOLIDWORKS File Utilities.</li>



<li>Set rules for where to save files and how to name them.</li>
</ul>
</div></div>



<p class="wp-block-paragraph">If you understand the quirks of SOLIDWORKS files, you can manage them correctly.</p>



<p class="wp-block-paragraph">Steer clear of preventable errors and trouble, and manage your files efficiently.</p>



<p class="wp-block-paragraph">Thank you for reading to the end.</p>

]]></content:encoded>
					
					<wfw:commentRss>https://sugitama-lab.tech/en/solidworks-file-management-tips/feed/</wfw:commentRss>
			<slash:comments>0</slash:comments>
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">3674</post-id>	</item>
		<item>
		<title>SOLIDWORKS Templates: How to Create a Custom Document Template and What to Set Up</title>
		<link>https://sugitama-lab.tech/en/solidworks-document-template-guide/</link>
					<comments>https://sugitama-lab.tech/en/solidworks-document-template-guide/#respond</comments>
		
		<dc:creator><![CDATA[sugitama]]></dc:creator>
		<pubDate>Mon, 09 Nov 2026 22:41:53 +0000</pubDate>
				<category><![CDATA[settings]]></category>
		<category><![CDATA[for beginners]]></category>
		<category><![CDATA[initial settings]]></category>
		<category><![CDATA[speed & performance]]></category>
		<guid isPermaLink="false">https://sugitama-lab.tech/?p=3670</guid>

					<description><![CDATA[Stop repeating the same settings in every new file. Learn how to create, save, and use a SOLIDWORKS document template, and which settings are worth building into it.]]></description>
										<content:encoded><![CDATA[
<p class="wp-block-paragraph">Every time you create a new file in SOLIDWORKS, do you find yourself repeating the same settings changes?</p>



<p class="wp-block-paragraph">If you change the units every time, or fix the drawing border every time, that is a big loss of time.</p>



<p class="wp-block-paragraph">If you want to work efficiently in SOLIDWORKS, I strongly recommend setting up your own <strong>document template</strong>.</p>



<p class="wp-block-paragraph">The default templates are designed to be general-purpose. For production work, they often lack something you need, or do not match your company&#8217;s standards.</p>



<p class="wp-block-paragraph">Customizing them gives you these benefits.</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_ttl"><div class="box_title"><span class="span__box_title">What You Gain from an Optimized Template</span></div><div class="cboxcomment">
<ul class="wp-block-list">
<li><strong>Less time spent</strong>: You no longer have to change the same settings each time.</li>



<li><strong>Fewer mistakes</strong>: You avoid errors such as the wrong unit system or the wrong drafting standard.</li>



<li><strong>Consistent quality</strong>: A whole team or company can share the same drawing appearance and properties.</li>
</ul>
</div></div>



<p class="wp-block-paragraph">This article explains how to create and use a SOLIDWORKS document template, and which settings I recommend putting in it, from the viewpoint of everyday work.</p>



<p class="wp-block-paragraph">Customizing your templates is an easy way to improve your efficiency.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">What Is a SOLIDWORKS Template?</h2>



<p class="wp-block-paragraph">SOLIDWORKS has several kinds of templates.</p>



<p class="wp-block-paragraph">This article focuses on the <strong>document template</strong>.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">The document template is the main one.</p>



<p class="wp-block-paragraph">There are other kinds of templates too, such as the bill of materials template.</p>
</div></div>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_ttl"><div class="box_title"><span class="span__box_title">What You Can Set in a Document Template</span></div><div class="cboxcomment">
<ul class="wp-block-list">
<li><strong>Document Properties</strong>: mainly the drafting standard, the unit system, and the dimension style</li>



<li><strong>File properties</strong>: the items you want to store as information about the model</li>



<li><strong>Display state of the 3D model</strong>: the background brightness, the display style, the items shown in the FeatureManager design tree, and so on</li>



<li><strong>Drawing border and line styles</strong> for drawings</li>
</ul>
</div></div>



<p class="wp-block-paragraph">If you set up your document template well, you can unify the look of your models and drawings the way you or your company like.</p>



<p class="wp-block-paragraph">It also makes your work more efficient, both in design and in the steps after design.</p>



<p class="wp-block-paragraph">For example, a common drafting standard, unit system, and drawing border are essential when you handle drawings. A common font, line style, and arrow size also change how easy a drawing is to read.</p>



<p class="wp-block-paragraph">Whether the background is light or dark also affects how tired your eyes get while you model.</p>



<p class="wp-block-paragraph">You need to set up a document template separately for each of the three file types: <strong>part, assembly, and drawing</strong>.</p>



<p class="wp-block-paragraph">In addition, if you need four drawing sizes, for example A1, A2, A3, and A4, you need to create four drawing templates.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">So you need two model templates and four drawing templates (for A1 to A4).</p>



<p class="wp-block-paragraph">It is not difficult, but it takes a little effort to make them.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">Document Properties vs. System Options</h2>



<p class="wp-block-paragraph">SOLIDWORKS has another kind of setting: <strong>System Options</strong>.</p>



<p class="wp-block-paragraph">Let&#8217;s get a rough idea of how Document Properties and System Options differ.</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_simple"><div class="box_title"><span class="span__box_title">The Difference at a Glance</span></div><div class="cboxcomment">
<ul class="wp-block-list">
<li><strong>System Options</strong><br>These apply to all files, both existing and new. They are stored in the registry, not in the file. You can think of them as settings for each user, each device, or each PC.</li>



<li><strong>Document Properties</strong><br>These are stored in the file. Even on a PC with different settings, the file is used and displayed under the same conditions. The unit system or the dimension display style does not change because of a PC&#8217;s settings.</li>
</ul>
</div></div>



<p class="wp-block-paragraph">Because a template stores Document Properties, the settings you build into it travel with every file you create from it.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">How to Save and Use a Document Template</h2>



<p class="wp-block-paragraph">Let&#8217;s look at how to make a document template.</p>



<p class="wp-block-paragraph">You do not start from zero. You customize one of the default SOLIDWORKS templates for your own use.</p>



<p class="wp-block-paragraph">The steps below use a part template as an example.</p>



<h3 class="wp-block-heading">Save a Template</h3>



<ol class="wp-block-list">
<li>Click <strong>New</strong> and create a new part from any existing part template (the default one is fine).</li>



<li>Set the items you want in <strong>Document Properties</strong>. If there are other settings you want, such as file properties or the display state, set those too.</li>



<li>As an example, let&#8217;s change the drafting standard. Click <strong>Tools &gt; Options</strong> and open the <strong>Document Properties</strong> tab.</li>
</ol>



<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="1021" height="339" src="https://sugitama-lab.tech/wp-content/uploads/2026/10/perf-sysopt-open-menu.png" alt="Tools menu in SOLIDWORKS with the Options command highlighted" class="wp-image-3224" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/10/perf-sysopt-open-menu.png 1021w, https://sugitama-lab.tech/wp-content/uploads/2026/10/perf-sysopt-open-menu-300x100.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/10/perf-sysopt-open-menu-768x255.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/10/perf-sysopt-open-menu-485x161.png 485w" sizes="auto, (max-width: 1021px) 100vw, 1021px" /></figure>



<ol start="4" class="wp-block-list">
<li>Go to <strong>Drafting</strong> and change <strong>Overall drafting standard</strong> to the one you use (for example, ISO, ANSI, DIN, or JIS). Then click <strong>OK</strong> to close the window.</li>



<li>Click <strong>File &gt; Save As</strong>. Set <strong>Save as type</strong> to <strong>Part Templates (*.prtdot)</strong>.</li>



<li>Browse to a folder of your own (create one first if you need to), and save the file there.</li>
</ol>



<p class="wp-block-paragraph">Give the folder a name that tells you at a glance what kind of templates are inside. I explain why in the next section.</p>



<p class="wp-block-paragraph">In this example, I saved a document template file named <strong>Sugitama_Parts.prtdot</strong> in a folder named <strong>sugitama_template</strong>.</p>



<p class="is-style-supplement-normal wp-block-paragraph">Assembly templates use <strong>Assembly Templates (*.asmdot)</strong> and drawing templates use <strong>Drawing Templates (*.drwdot)</strong> as the file type. SOLIDWORKS may suggest its default template folder when you choose a template type. It is safer to keep your own templates in a folder outside the SOLIDWORKS installation folder, so that an upgrade or reinstall cannot overwrite them.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Use the Template</h3>



<p class="wp-block-paragraph">After you save a template, make it available in SOLIDWORKS. To use a template you created, you need to change a System Option.</p>



<ol class="wp-block-list">
<li>Click <strong>Tools &gt; Options</strong> to open the System Options.</li>



<li>On the <strong>System Options</strong> tab, select <strong>File Locations</strong>.</li>



<li>Make sure <strong>Show folders for</strong> is set to <strong>Document Templates</strong>, and click <strong>Add</strong>.</li>



<li>In the folder window that opens, select the folder that holds your templates and click <strong>Select Folder</strong>.</li>



<li>Check that the folder you selected is now in the list, and click <strong>OK</strong>.</li>



<li>Click <strong>File &gt; New</strong>. If the dialog is not already in the Advanced view, switch to <strong>Advanced</strong>.</li>
</ol>



<p class="wp-block-paragraph">A new tab named <strong>sugitama_template</strong> appears, and the template <strong>Sugitama_Parts</strong> is now available.</p>



<p class="is-style-supplement-normal wp-block-paragraph">The name of the folder becomes the name of the tab. That is why I suggest giving the folder a name you can recognize at a glance. Make sure the folder contains at least one template file, or the tab may not appear.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">Recommended Settings for Your Template</h2>



<p class="wp-block-paragraph">Here are the settings that I think are useful to build into a template.</p>



<h3 class="wp-block-heading">Settings for Parts and Assemblies</h3>



<p class="wp-block-paragraph">First, the settings for part templates and assembly templates.</p>



<p class="wp-block-paragraph">These settings cover the information the model itself keeps, and the settings that make modeling easier.</p>



<h4 class="wp-block-heading">1. Document Properties</h4>



<p class="wp-block-paragraph">Check the following items in Document Properties.</p>



<ul class="wp-block-list">
<li><strong>Drafting standard</strong>: Choose the standard that your company and your customers use, such as ISO, ANSI, DIN, or JIS.</li>



<li><strong>Units</strong>: Millimeters, kilograms, and seconds are a practical choice if you work in metric. (To combine millimeters with kilograms, choose <strong>Custom</strong> on the <strong>Units</strong> page.)</li>



<li><strong>Font</strong>: Choose whichever font you like, but pick one that is installed on Windows by default. If you send the data to a customer who does not have your font, it will not display correctly.</li>



<li><strong>Image Quality</strong>: This controls how smooth curves look. A finer setting lowers performance, so be careful.</li>
</ul>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">Some companies specify the arrow type, the font, and the size.</p>



<p class="wp-block-paragraph">In that case, set these to match your internal standard.</p>
</div></div>



<h4 class="wp-block-heading">2. Add Reference Axes</h4>



<p class="wp-block-paragraph">If you insert reference axes in the template (<strong>Insert &gt; Reference Geometry &gt; Axis</strong>), modeling and drawing become more efficient.</p>



<p class="wp-block-paragraph">With axes in place, you can dimension from an axis or add relations to it while you model, which makes modeling easier.</p>



<p class="wp-block-paragraph">You can also show the axes on the drawing, so you do not need to insert a centerline each time.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">This is not a required setting, but it is a good one to add because it saves work.</p>
</div></div>



<p class="wp-block-paragraph">After you create the axes, turn on the axis display (<strong>View &gt; Hide/Show &gt; Axes</strong>).</p>



<p class="wp-block-paragraph">If you forget, the axes you made stay hidden.</p>



<h4 class="wp-block-heading">3. File Properties (Custom Properties)</h4>



<p class="wp-block-paragraph">In SOLIDWORKS, you can register file properties (<strong>File &gt; Properties</strong>) for both model files and drawing files.</p>



<p class="wp-block-paragraph">The information you enter in the model&#8217;s properties can be read into the title block of the drawing automatically, and it can also be used to create a bill of materials automatically.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">In SOLIDWORKS, the model and the drawing are linked, and the model is the parent. (The drawing is created by referring to the model.)</p>



<p class="wp-block-paragraph">If you put the information in the model, it carries over to the drawing automatically.</p>
</div></div>



<p class="wp-block-paragraph">Pick the items you want to register as properties, and set them up in the template.</p>



<p class="wp-block-paragraph">Typical basic management items include the <strong>drawing number, model name, designer, drafter, and creation date</strong>. It also helps to add the items needed for manufacturing, such as <strong>material, heat treatment, surface treatment, and quantity</strong>.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">If you need other items for management, add them as needed.</p>



<p class="wp-block-paragraph">Filling these in makes drawing creation smoother.</p>
</div></div>



<p class="wp-block-paragraph">Set up the model file&#8217;s properties so that you can use them in drawings.</p>



<p class="wp-block-paragraph">The properties of a drawing file usually have no particular use, so you do not need to set them in the template.</p>



<h4 class="wp-block-heading">4. View Settings</h4>



<p class="wp-block-paragraph">You look at the screen for a long time while you design. Set up the display so that it is as easy on your eyes as possible.</p>



<p class="wp-block-paragraph">This is purely a matter of taste. I use the following settings.</p>



<ul class="wp-block-list">
<li>Display style: <strong>Shaded With Edges</strong></li>



<li>Background: I leave it at the default</li>



<li>Floor reflection and floor shadow: turned off</li>
</ul>



<p class="wp-block-paragraph">Nothing unusual. My display is close to the default.</p>



<h4 class="wp-block-heading">5. FeatureManager Design Tree Display</h4>



<p class="wp-block-paragraph">A cluttered FeatureManager design tree is hard to read, so tidy up how it is displayed.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">If each part also shows its configuration and display state, the tree gets cluttered.</p>



<p class="wp-block-paragraph">If a part has only one configuration, hide those names and the tree becomes clean and easy to read.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Settings for Drawings</h3>



<h4 class="wp-block-heading">1. Drawing Border (Sheet Format)</h4>



<p class="wp-block-paragraph">Set up the drawing border that you use on your drawings.</p>



<p class="wp-block-paragraph">The border and the title block together are called the <strong>sheet format</strong>. You need one for each drawing size you use. Use the paper sizes your company uses, for example A1 to A4 in ISO, or A to E in ANSI.</p>



<p class="wp-block-paragraph">To edit the border, right-click inside it and select <strong>Edit Sheet Format</strong>.</p>



<h4 class="wp-block-heading">2. Line Styles</h4>



<p class="wp-block-paragraph">The basic line styles are available by default. If you want to use a special line style all the time, it is a good idea to set it up in the template.</p>



<p class="wp-block-paragraph">For example, I often use these two:</p>



<ul class="wp-block-list">
<li>A line style that does not print, for design notes that I want to write on the drawing but not print</li>



<li>A color-coded line style that makes revised areas stand out</li>
</ul>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">Summary</h2>



<p class="wp-block-paragraph">This article explained how to set up and use a document template, and the settings I recommend building into it.</p>



<p class="wp-block-paragraph">As you work with your template, you will find more and more things you want to add.</p>



<p class="wp-block-paragraph">Do not try to do everything at once. Update the template as you go, and you will build one that is easy to use.</p>



<p class="wp-block-paragraph">You can also create templates for specific situations, such as one for sheet metal parts, one for machined parts, and one for large assemblies.</p>



<p class="wp-block-paragraph">I hope a template tailored to your work makes SOLIDWORKS more comfortable to use.</p>



<p class="wp-block-paragraph">Thank you for reading to the end.</p>

]]></content:encoded>
					
					<wfw:commentRss>https://sugitama-lab.tech/en/solidworks-document-template-guide/feed/</wfw:commentRss>
			<slash:comments>0</slash:comments>
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">3670</post-id>	</item>
		<item>
		<title>How to Use SOLIDWORKS Remotely: Free Tailscale VPN and Remote Desktop Setup</title>
		<link>https://sugitama-lab.tech/en/solidworks-remote-desktop-tailscale/</link>
					<comments>https://sugitama-lab.tech/en/solidworks-remote-desktop-tailscale/#respond</comments>
		
		<dc:creator><![CDATA[sugitama]]></dc:creator>
		<pubDate>Mon, 09 Nov 2026 22:41:50 +0000</pubDate>
				<category><![CDATA[Tips & Features]]></category>
		<category><![CDATA[for beginners]]></category>
		<category><![CDATA[intermediate & advanced]]></category>
		<category><![CDATA[makers]]></category>
		<category><![CDATA[remote work]]></category>
		<guid isPermaLink="false">https://sugitama-lab.tech/?p=3667</guid>

					<description><![CDATA[Take SOLIDWORKS anywhere without a mobile workstation: connect to your home PC with the free Tailscale VPN and Remote Desktop, and even power it on remotely.]]></description>
										<content:encoded><![CDATA[
<p class="wp-block-paragraph">For a designer who normally works at a desk in the office, working from a caf&eacute; is an appealing idea.</p>



<p class="wp-block-paragraph">But if you want to use SOLIDWORKS outside the office, there is a big obstacle.</p>



<p class="wp-block-paragraph">A PC that runs SOLIDWORKS smoothly is <strong>too heavy to carry around</strong>, and a <strong>mobile workstation is too expensive</strong>.</p>



<p class="wp-block-paragraph">There is, however, a way to <strong>keep using the desktop you already have at home, at a low cost and safely</strong>.</p>



<p class="wp-block-paragraph">This article explains how to carry SOLIDWORKS with you using a VPN app called <strong>Tailscale</strong> and <strong>Remote Desktop</strong> (the Remote Desktop Protocol, or RDP).</p>



<p class="wp-block-paragraph">With this setup, you can fix a drawing on a business trip, or do some hobby modeling from the living-room sofa.</p>



<p class="wp-block-paragraph">If you are interested in working from anywhere, please read on.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">A Third Option for Using SOLIDWORKS Away from Your Desk</h2>



<p class="wp-block-paragraph">There are three main ways to use SOLIDWORKS outside the office.</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_ttl"><div class="box_title"><span class="span__box_title">Three Ways to Take SOLIDWORKS with You</span></div><div class="cboxcomment">
<ol class="wp-block-list">
<li><strong>Carry a mobile workstation</strong><br>Pros: High performance anywhere, and no dependence on an internet connection.<br>Cons: The PC is heavy, expensive, and drains the battery quickly.</li>



<li><strong>Use a cloud-based 3D CAD (such as SOLIDWORKS xDesign)</strong><br>Pros: It runs in a browser, so an ordinary laptop is enough.<br>Cons: The usability and functions differ from the desktop version, and moving your existing data takes effort.</li>



<li><strong>Control your office or home workstation remotely (Remote Desktop)</strong><br>Pros: You keep using your familiar PC environment and data, and the PC you carry can be low-spec.<br>Cons: How comfortable it feels depends on the speed of your internet connection.</li>
</ol>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">This article covers the third option, using <strong>Remote Desktop (RDP)</strong>.</p>



<p class="wp-block-paragraph">From a lightweight laptop or tablet, you call up the screen of the high-performance workstation at home and operate it.</p>



<p class="wp-block-paragraph">That frees you from both the heavy luggage and the big expense.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">Tailscale: A Simple, Safe Way to Connect</h2>



<p class="wp-block-paragraph">RDP itself is a standard feature of Windows.</p>



<p class="wp-block-paragraph">However, exposing it directly to the internet is risky.</p>



<p class="wp-block-paragraph">To use RDP safely, you need to put proper security around it.</p>



<p class="wp-block-paragraph">Without it, an attacker may be able to steal your information or take over your PC and accounts.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">This is where a <strong>VPN (virtual private network)</strong> comes in.</p>



<p class="wp-block-paragraph">A VPN is a technology that builds your own private &quot;tunnel&quot; through the public internet.</p>



<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="1280" height="625" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/tailscale-vpn-tunnel-en.png" alt="Illustration of an encrypted tunnel carrying traffic from a laptop in a cafe to a home workstation, across the busy internet" class="wp-image-3663" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/tailscale-vpn-tunnel-en.png 1280w, https://sugitama-lab.tech/wp-content/uploads/2026/11/tailscale-vpn-tunnel-en-300x146.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/tailscale-vpn-tunnel-en-1024x500.png 1024w, https://sugitama-lab.tech/wp-content/uploads/2026/11/tailscale-vpn-tunnel-en-768x375.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/tailscale-vpn-tunnel-en-485x237.png 485w" sizes="auto, (max-width: 1280px) 100vw, 1280px" /></figure>



<p class="wp-block-paragraph">Until recently, building a safe VPN environment on your own was difficult.</p>



<ul class="wp-block-list stk-list-icon--bad">
<li>You had to buy a router that supports VPN.</li>



<li>You needed technical network settings such as &quot;port forwarding&quot; and &quot;DDNS&quot; (manual router and address settings that open your home network to the internet).</li>
</ul>



<p class="wp-block-paragraph">Other VPN products exist, but with <strong>Tailscale</strong>, which I recommend here, you can set up a VPN environment very easily.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_ttl"><div class="box_title"><span class="span__box_title">Three Reasons to Use Tailscale</span></div><div class="cboxcomment">
<ol class="wp-block-list">
<li><strong>No extra equipment</strong>:<br><strong>No expensive router is needed.</strong> You just install the software on the PCs you already have.</li>



<li><strong>No complicated setup</strong>:<br>Port forwarding and other <strong>difficult settings are not required</strong>. You just install it and log in.</li>



<li><strong>Free for personal use</strong>:<br>Tailscale&#8217;s Personal plan is <strong>free</strong>. For the current limits, see the <a href="https://tailscale.com/pricing" target="_blank" rel="noreferrer noopener"><strong>official pricing page</strong></a>.</li>
</ol>
</div></div>



<p class="wp-block-paragraph">With Tailscale, PCs in different places can quickly form a secure network, as if they were connected by a LAN cable in the same room.</p>



<p class="is-style-supplement-warning wp-block-paragraph"><strong>Before you start:</strong> The free Personal plan is meant for personal use. If you plan to connect a PC that belongs to your employer, check Tailscale&#8217;s terms and your company&#8217;s IT policy first. Also turn on two-step verification for the Google or Microsoft account you use to log in to Tailscale, because that account is the key to your private network.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">Step by Step: Build the Remote Environment with Tailscale</h2>



<p class="wp-block-paragraph">Now let&#8217;s build the environment.</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_ttl"><div class="box_title"><span class="span__box_title">What You Need (Important)</span></div><div class="cboxcomment">
<ul class="wp-block-list">
<li><strong>Host PC (the one you control remotely)</strong>: the workstation at home with SOLIDWORKS installed
<ul class="wp-block-list">
<li><strong>Very important: its edition of Windows must be Pro, Enterprise, or Education.</strong> Windows 10 reached the end of support on October 14, 2025, so Windows 11 Pro is the safer choice.</li>



<li>The Home edition does not include the Remote Desktop host feature, so such a PC cannot be controlled remotely. Check your edition under Settings &gt; System &gt; About.</li>



<li>If you have the Home edition, you need to upgrade to Pro through the Microsoft Store (paid).</li>
</ul>
</li>



<li><strong>Client PC (the one you operate from)</strong>: the laptop you carry
<ul class="wp-block-list">
<li>This can be anything: Windows Home, a Mac, an iPad, and so on.</li>
</ul>
</li>
</ul>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Step 1: Install Tailscale and Connect</h3>



<p class="wp-block-paragraph">Do the following on both the host PC and the client PC.</p>



<ol class="wp-block-list">
<li>Go to the <a href="https://tailscale.com/" target="_blank" rel="noreferrer noopener"><strong>official Tailscale website</strong></a>, then download and install the app. (On a Mac or iPad, you can also get it from the App Store.)</li>



<li>Start the app and log in with a Google or Microsoft account, for example.<br><strong>Use the same account on the host side and the client side.</strong></li>



<li>After you log in, the Tailscale <a href="https://login.tailscale.com/admin" target="_blank" rel="noreferrer noopener">admin console</a> shows the connected PCs. Note the Tailscale IP address of your host PC (it starts with 100.), because you will need it in Step 3.</li>



<li><strong>Disable key expiry for the host PC</strong> in the admin console. By default, each device has to sign in to Tailscale again about every 180 days, and connections stop working until it does. If that happens while you are away from home, you cannot fix it remotely. (See Tailscale&#8217;s <a href="https://tailscale.com/kb/1028/key-expiry" target="_blank" rel="noreferrer noopener">key expiry documentation</a>.)</li>



<li>On the host PC, also turn on <strong>Run unattended</strong> so that Tailscale keeps running even when nobody is signed in to Windows. I explain how in the note near the end of this article.</li>
</ol>



<p class="wp-block-paragraph">That is all it takes to open your own private tunnel.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Step 2: Set Up the Home Workstation (Host Side)</h3>



<p class="wp-block-paragraph">Set up the workstation at home so that it accepts remote operation.</p>



<p class="wp-block-paragraph"><strong>(This feature requires the Pro edition or higher.)</strong></p>



<ol class="wp-block-list">
<li>Open Windows <strong>Settings</strong> &rarr; <strong>System</strong> &rarr; <strong>Remote Desktop</strong>.</li>



<li>Turn on the <strong>Remote Desktop</strong> switch, and select Confirm if Windows asks.</li>



<li>While you are there, check the power settings (Settings &rarr; System &rarr; Power). If the PC goes to sleep, you cannot connect, so set it not to sleep while it is plugged in.</li>
</ol>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Step 3: Connect from the PC You Carry (Client Side)</h3>



<p class="wp-block-paragraph">Now it is time to connect.</p>



<ol class="wp-block-list">
<li>On the PC you carry, start <strong>Remote Desktop Connection</strong>. (It is a standard Windows app. On a Mac or iPhone/iPad, use Microsoft&#8217;s <strong>Windows App</strong> instead.)</li>



<li>In the &quot;Computer&quot; field, enter <strong>the Tailscale IP address of the home workstation (the number that starts with 100.) that you noted in Step 1</strong>, then click Connect. (On a Mac or iPad, install Tailscale and sign in with the same account first, then add the 100.x address as a new PC in Windows App.)</li>



<li>Enter the user name and password of the workstation at home. If you sign in to Windows with a Microsoft account, use that account&#8217;s email address and password, not a PIN. A Windows account without a password usually cannot be used for Remote Desktop.</li>



<li>If a certificate warning appears the first time (it says the identity of the remote computer cannot be verified), it is expected when you connect by IP address. If you are sure the address is your own PC&#8217;s, you can continue.</li>
</ol>



<p class="is-style-supplement-normal wp-block-paragraph">The 100.x address is assigned to the home workstation by Tailscale, and it stays the same even when the device switches networks, so you do not need to look it up every time.</p>



<p class="wp-block-paragraph">If the connection succeeds, the SOLIDWORKS screen of your home workstation should fill the screen of your laptop.</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_simple"><div class="box_title"><span class="span__box_title">Column: What If 3D Operation Feels Heavy?</span></div><div class="cboxcomment">
<p class="wp-block-paragraph">The standard Windows Remote Desktop (RDP) gives a clear picture, but it is not very good at heavy drawing, such as spinning a model around in SOLIDWORKS.</p>



<p class="wp-block-paragraph">If it feels choppy and hard to work with, try <strong>Parsec</strong>, a remote-access app made for gamers, instead of RDP.</p>



<p class="wp-block-paragraph">It is designed for <strong>low latency</strong>, so it may make 3D CAD operation feel smoother. Parsec is a separate tool with its own account and settings, so follow its own instructions to set it up. How well either tool performs depends on your PC and your connection, so try both.</p>



<p class="wp-block-paragraph">Parsec is <strong>free for personal, non-commercial use</strong>. According to <a href="https://parsec.app/pricing" target="_blank" rel="noreferrer noopener">Parsec&#8217;s pricing page</a>, commercial use requires a paid plan.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">The Physical Problem: How to Turn the PC On</h2>



<p class="wp-block-paragraph">The last big obstacle when building a remote-work environment is this.</p>



<p class="wp-block-paragraph">How do you press the power button of a PC in an empty house or office?</p>



<p class="wp-block-paragraph">You want to turn the PC on remotely, only when you need it. You can do that by combining a <strong>smart plug</strong> with a setting in the PC&#8217;s <strong>BIOS</strong> (the firmware setup screen that you can open before Windows starts).</p>



<p class="wp-block-paragraph">Once this is set up, your remote-work environment is complete.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">How It Works</h3>



<p class="wp-block-paragraph">Many desktop PCs have a function that <strong>starts the PC automatically when power returns after it has been cut, such as in a power outage</strong>. We use that function.</p>



<ol class="wp-block-list">
<li>Put a <strong>smart plug</strong> between the PC and the wall outlet.</li>



<li>From wherever you are, turn the smart plug <strong>ON</strong> with its smartphone app.</li>



<li>Power flows to the PC, the PC decides that power has been restored after an outage, and it <strong>starts up by itself</strong>.</li>
</ol>



<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="1280" height="720" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/smart-plug-remote-power-en.png" alt="Diagram: wall outlet, smart plug, and the PC power plug, with a phone switching the smart plug on remotely" class="wp-image-3664" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/smart-plug-remote-power-en.png 1280w, https://sugitama-lab.tech/wp-content/uploads/2026/11/smart-plug-remote-power-en-300x169.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/smart-plug-remote-power-en-1024x576.png 1024w, https://sugitama-lab.tech/wp-content/uploads/2026/11/smart-plug-remote-power-en-768x432.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/smart-plug-remote-power-en-485x273.png 485w" sizes="auto, (max-width: 1280px) 100vw, 1280px" /></figure>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">BIOS Settings</h3>



<p class="wp-block-paragraph">To use this function, you need to change a setting in the <strong>BIOS</strong> (also called UEFI) of the workstation. Check that your PC has this option before you buy a plug. It may be named differently, such as &quot;After Power Loss&quot; or &quot;AC Recovery.&quot;</p>



<ol class="wp-block-list">
<li>Turn on the PC and, while the maker&#8217;s logo is showing, press the <strong>F2</strong> or <strong>Delete</strong> key repeatedly to enter the BIOS screen. (The key differs by model and maker, so check the PC maker&#8217;s website for details.)</li>



<li>Look for a tab such as <strong>Power Management</strong>.</li>



<li>Find an item such as <strong>AC Power Loss Recovery</strong> or <strong>Restore on AC Power Loss</strong>, and change the setting to <strong>Power On</strong> (or <strong>Always On</strong> or <strong>Last State</strong>, depending on the PC).</li>



<li>Save the settings and exit the BIOS.</li>
</ol>



<p class="is-style-supplement-normal wp-block-paragraph">If your PC starts too fast to catch the key, on Windows 11 you can open the BIOS from Settings &rarr; System &rarr; Recovery &rarr; Advanced startup &rarr; Restart now, then Troubleshoot &rarr; Advanced options &rarr; UEFI Firmware Settings.</p>



<p class="wp-block-paragraph">Now you are ready. Turn the PC on from your phone, wait a few minutes, and connect with Remote Desktop over Tailscale. With this flow, you can start working anytime, anywhere.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_simple"><div class="box_title"><span class="span__box_title">Before You Leave: Test the Whole Chain</span></div><div class="cboxcomment">
<ol class="wp-block-list">
<li>Set up the smart plug following its maker&#8217;s instructions, and make sure you can switch it from your phone <strong>using mobile data</strong>, not only your home Wi-Fi.</li>



<li>Shut down the PC, turn the plug off, then turn it on from your phone and confirm that the PC starts by itself.</li>



<li>From another PC or network, connect with Remote Desktop over Tailscale, and check that it also works after the PC has restarted without anyone signing in.</li>
</ol>
</div></div>



<p class="wp-block-paragraph">All of these steps need physical access to the home PC, so do them while you are still at home.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">A Smart Plug Also Helps with Security</h3>



<p class="wp-block-paragraph">Physically cutting the power to the PC with a smart plug is also a good security measure.</p>



<p class="wp-block-paragraph">A PC that is always connected to the internet and waiting in sleep mode can never be made completely risk-free, however well you defend it with a VPN.</p>



<p class="wp-block-paragraph">But if you turn off the power at the source with the smart plug, <strong>nobody can reach the PC from outside while it is off</strong>.</p>



<p class="wp-block-paragraph">To protect confidential data, I think that cutting the power when you are not using the PC is <strong>a very simple and very safe way</strong> to operate it.</p>



<p class="wp-block-paragraph">Note that the smart plug itself is controlled through an app account, so protect that account with a strong password and two-step verification too.</p>



<p class="is-style-supplement-warning wp-block-paragraph"><strong>Tip:</strong> When you finish working, always <strong>shut down</strong> from the Windows Start menu. Turn the smart plug OFF only after the PC has finished shutting down completely.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">How to Choose a Smart Plug</h3>



<p class="wp-block-paragraph">Many smart plugs are on sale, but there are two things to check when you use one with a high-spec PC such as a workstation.</p>



<ol class="wp-block-list">
<li><strong>Its rating must be clearly higher than what the PC needs.</strong> Check the input rating (amps or watts) on the label of the PC&#8217;s power supply, and choose a plug whose rated current and wattage are clearly above it for your local mains voltage. A plug rated too low may cut out or overheat when the PC starts up or runs under heavy load. Choose a plug that carries a safety certification recognized in your country.</li>



<li><strong>It should show power consumption (wattage).</strong> When you turn the plug on from a distance, watching the reading in the app rise from 0 W to something like 80 W tells you the PC has started.</li>
</ol>



<p class="wp-block-paragraph">&nbsp;</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_simple"><div class="box_title"><span class="span__box_title">Note: Starting the PC with a Smart Plug</span></div><div class="cboxcomment">
<p class="wp-block-paragraph">If the PC may restart or be powered on while nobody is signed in to Windows (for example, when you start it remotely with a smart plug, or after a Windows update restart), you need to set Tailscale to <strong>&quot;Run unattended.&quot;</strong></p>



<p class="wp-block-paragraph">With the default settings, Tailscale starts in the background when you sign in to Windows.</p>



<p class="wp-block-paragraph">So when the PC has only just been powered on, Tailscale is not running yet, and a Remote Desktop connection fails because the PC cannot be found.</p>



<p class="wp-block-paragraph">With &quot;Run unattended&quot; enabled, Tailscale keeps running in the background even before sign-in, so you can connect with Remote Desktop from the Windows sign-in screen.</p>



<p class="wp-block-paragraph">Right-click the Tailscale icon in the system tray (it may be hidden under the ^ arrow), point to <strong>Preferences</strong>, select <strong>Run unattended</strong>, and select Yes when the app asks. A check mark appears next to the item when it is on.</p>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="652" height="398" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/tailscale-run-unattended.png" alt="The Tailscale tray menu in Windows with Preferences open and Run unattended checked" class="wp-image-3665" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/tailscale-run-unattended.png 652w, https://sugitama-lab.tech/wp-content/uploads/2026/11/tailscale-run-unattended-300x183.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/tailscale-run-unattended-485x296.png 485w" sizes="auto, (max-width: 652px) 100vw, 652px" /></figure>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">Summary</h2>



<p class="wp-block-paragraph">This article explained how to use SOLIDWORKS while working remotely, getting the most out of the high-performance environment you already own, without buying an expensive mobile workstation.</p>



<p class="wp-block-paragraph">The main extra item you need is a <strong>smart plug</strong>, which you use to turn the PC on remotely.</p>



<p class="wp-block-paragraph">If your PC at home runs the Home edition, you also need to pay for the upgrade to Pro, but the total cost should still be much lower than that of a mobile workstation.</p>



<p class="wp-block-paragraph"><strong>Tailscale</strong>, the core of the network, is free to try.</p>



<p class="wp-block-paragraph">Why not start by installing Tailscale this weekend? Your options for how you work could widen a lot.</p>



<p class="wp-block-paragraph">Thank you for reading to the end.</p>

]]></content:encoded>
					
					<wfw:commentRss>https://sugitama-lab.tech/en/solidworks-remote-desktop-tailscale/feed/</wfw:commentRss>
			<slash:comments>0</slash:comments>
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">3667</post-id>	</item>
		<item>
		<title>How to Install SOLIDWORKS for Makers: Buy, Install, and Launch Step by Step</title>
		<link>https://sugitama-lab.tech/en/solidworks-for-makers-install/</link>
					<comments>https://sugitama-lab.tech/en/solidworks-for-makers-install/#respond</comments>
		
		<dc:creator><![CDATA[sugitama]]></dc:creator>
		<pubDate>Sat, 07 Nov 2026 11:58:04 +0000</pubDate>
				<category><![CDATA[SOLIDWORKS for Makers]]></category>
		<category><![CDATA[cost reduction]]></category>
		<category><![CDATA[for beginners]]></category>
		<category><![CDATA[makers]]></category>
		<category><![CDATA[students & education]]></category>
		<guid isPermaLink="false">https://sugitama-lab.tech/?p=3655</guid>

					<description><![CDATA[Step-by-step guide to buying, installing, and launching SOLIDWORKS for Makers, the low-cost personal version of SOLIDWORKS for hobbyists and learners.]]></description>
										<content:encoded><![CDATA[
<p class="wp-block-paragraph">If you have never used 3D CAD before, choosing your first 3D CAD software matters a lot.</p>



<p class="wp-block-paragraph">Each CAD program works differently, so it takes a long time to get used to one.</p>



<p class="wp-block-paragraph">If you start with one, find it hard to use, and switch to another, you have to spend time and effort getting used to a new set of operations all over again.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">Among the many 3D CAD programs out there, the one I recommend is <strong>SOLIDWORKS</strong>.</p>



<p class="wp-block-paragraph">My reasons are its rich set of functions and tools that make design easier, and the fact that it is widely used by companies.</p>



<p class="wp-block-paragraph">For more details, see this article.</p>



<p class="wp-block-paragraph">&raquo;<a href="https://sugitama-lab.tech/en/fusion-vs-solidworks/" target="_blank" rel="noreferrer noopener"><strong>Autodesk Fusion vs SOLIDWORKS for Beginners: Which Free or Low-Cost 3D CAD Should You Pick?</strong></a></p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">To use SOLIDWORKS, you normally need to buy a <span class="pre--maker span-stk-maker-blue">commercial license that costs many times more than SOLIDWORKS for Makers</span>.</p>



<p class="wp-block-paragraph">However, for limited purposes such as hobby projects or practicing 3D CAD, you can use a <strong>very low-priced version of SOLIDWORKS</strong>.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">This article explains <strong>SOLIDWORKS for Makers</strong>, the product you can use at that very low price.</p>



<p class="wp-block-paragraph">It covers the differences from commercial SOLIDWORKS and the installation steps, in plain language.</p>



<p class="wp-block-paragraph">If you want to try SOLIDWORKS for personal use, please read on.</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_ttl"><div class="box_title"><span class="span__box_title">This article is for you if you&#8230;</span></div><div class="cboxcomment">
<ul class="wp-block-list">
<li>want to <strong>keep improving</strong> and practice SOLIDWORKS at home</li>



<li>want to use SOLIDWORKS for <strong>creative hobby projects</strong></li>



<li>are <strong>curious</strong> and want to see how useful SOLIDWORKS is</li>
</ul>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">What Is SOLIDWORKS for Makers?</h2>



<p class="wp-block-paragraph">The official name of SOLIDWORKS for Makers is <strong>3DEXPERIENCE SOLIDWORKS for Makers</strong>.</p>



<p class="wp-block-paragraph">It is a <strong>personal version of SOLIDWORKS</strong> offered directly by Dassault Systèmes.</p>



<p class="wp-block-paragraph">It is a different product from the SOLIDWORKS sold through resellers.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">In this article, I call the SOLIDWORKS you buy from a reseller &quot;commercial SOLIDWORKS&quot; to tell it apart from SOLIDWORKS for Makers.</p>


<p class="wp-block-paragraph">Keep that in mind as you read.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">SOLIDWORKS for Makers has the following four main characteristics.</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_simple"><div class="box_title"><span class="span__box_title">Characteristics of SOLIDWORKS for Makers</span></div><div class="cboxcomment">
<ul class="wp-block-list">
<li>Very <strong>low price</strong> (US$48 per year or US$15 per month, excluding taxes, as of November 2026)</li>



<li>Sold only as the subscription-based, cloud-connected <strong>Connected</strong> license</li>



<li>Limited to <strong>non-commercial use</strong> (you may sell what you make for a profit of up to US$2,000 a year)</li>



<li><strong>Limited support</strong></li>
</ul>



<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="1389" height="564" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/makers-characteristics-v2.png" alt="Summary of the characteristics of SOLIDWORKS for Makers" class="wp-image-3581" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/makers-characteristics-v2.png 1389w, https://sugitama-lab.tech/wp-content/uploads/2026/11/makers-characteristics-v2-300x122.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/makers-characteristics-v2-1024x416.png 1024w, https://sugitama-lab.tech/wp-content/uploads/2026/11/makers-characteristics-v2-768x312.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/makers-characteristics-v2-485x197.png 485w" sizes="auto, (max-width: 1389px) 100vw, 1389px" /></figure>
</div></div>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">There are also <strong>differences from commercial SOLIDWORKS</strong>, so please keep them in mind.</p>


<p class="wp-block-paragraph">I list the main ones near the end of this article.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;&nbsp;</p>



<p class="wp-block-paragraph">If you want to know more about the differences between commercial SOLIDWORKS and SOLIDWORKS for Makers, please read this article.</p>



<p class="wp-block-paragraph">&raquo;<a href="https://sugitama-lab.tech/en/solidworks-for-makers-review/" target="_blank" rel="noreferrer noopener"><strong>SOLIDWORKS for Makers: What You Can and Can&#8217;t Do</strong></a></p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">There is also a similar license called <strong>SOLIDWORKS xDesign for Makers</strong>.</p>



<p class="wp-block-paragraph">It is also a <strong>personal product</strong> offered directly by Dassault Systèmes, but <strong>you cannot use SOLIDWORKS with it</strong>.</p>



<p class="wp-block-paragraph">It lets you use xDesign, the cloud-based app in the SOLIDWORKS family.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">How to Get Started with SOLIDWORKS for Makers</h2>



<p class="wp-block-paragraph">There are five steps to get started with SOLIDWORKS for Makers.</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_ttl"><div class="box_title"><span class="span__box_title">5 Steps to Get Started with SOLIDWORKS for Makers</span></div><div class="cboxcomment">
<ol class="wp-block-list">
<li>Prepare a CAD PC</li>



<li>Create a 3DEXPERIENCE ID (user account)</li>



<li>Buy a license</li>



<li>Install</li>



<li>Launch</li>
</ol>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">I will explain each step in detail.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">Some of my screenshots were taken with a Japanese-language interface, so for those steps I describe the screen in words instead.</p>


<p class="wp-block-paragraph">Where a screen is already in English, I use the original screenshot.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Prepare a CAD PC</h3>



<p class="wp-block-paragraph">To use SOLIDWORKS for Makers, you need a workstation with a graphics card.</p>



<p class="wp-block-paragraph">There are two points to check when choosing a workstation.</p>



<ol class="wp-block-list">
<li>It meets the SOLIDWORKS system requirements</li>



<li>It passes the cloud eligibility check</li>
</ol>



<p class="wp-block-paragraph">&nbsp;</p>



<h4 class="wp-block-heading">System requirements</h4>



<p class="wp-block-paragraph">A configuration that meets the SOLIDWORKS system requirements looks like this.</p>



<figure class="wp-block-table stk-table-thdesign is-style-stk-table-border"><table class="has-fixed-layout"><tbody><tr><td>OS</td><td>Windows 11, 64-bit (macOS is not supported)</td></tr><tr><td>CPU</td><td>64-bit Intel or AMD</td></tr><tr><td>Memory (RAM)</td><td>16 GB or more</td></tr><tr><td>Graphics card</td><td>Certified graphics card and driver</td></tr><tr><td>Drive</td><td>SSD recommended</td></tr></tbody></table><figcaption class="wp-element-caption">System requirements</figcaption></figure>



<p class="wp-block-paragraph">For details, see the <a href="https://www.solidworks.com/support/system-requirements" target="_blank" rel="noreferrer noopener"><strong>SOLIDWORKS website</strong></a>.</p>



<p class="wp-block-paragraph">Dassault&#8217;s <a href="https://www.3ds.com/store/faq/makers" target="_blank" rel="noreferrer noopener"><strong>Makers FAQ</strong></a> says the SOLIDWORKS Connected app cannot be installed on a Mac. Choose Windows 11, the OS listed in the official SOLIDWORKS 2026 requirements.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">If you are not sure how to choose a workstation or decide on its specs, this article explains it in detail.</p>



<p class="wp-block-paragraph">&raquo;<a href="https://sugitama-lab.tech/en/solidworks-pc-specs/" target="_blank" rel="noreferrer noopener"><strong>SOLIDWORKS PC Specs 2026: How to Choose the CPU, RAM, and GPU</strong></a></p>



<p class="wp-block-paragraph">&nbsp;</p>



<h4 class="wp-block-heading">Cloud eligibility</h4>



<p class="wp-block-paragraph">Like the subscription-based Connected license of commercial SOLIDWORKS, SOLIDWORKS for Makers requires your PC to pass a cloud eligibility check.</p>



<p class="wp-block-paragraph">The <a href="https://www.3ds.com/support/cloud/eligibility" target="_blank" rel="noreferrer noopener"><strong>3DEXPERIENCE website</strong></a> has a Cloud Eligibility page. Click <strong>Test your compatibility</strong> to download a check file. Run the downloaded file to check your PC. According to that page, the tool runs on Windows and needs internet access.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Create a 3DEXPERIENCE ID</h3>



<p class="wp-block-paragraph">To use SOLIDWORKS for Makers, you need a 3DEXPERIENCE user account (a 3DEXPERIENCE ID).</p>



<p class="wp-block-paragraph">Go to the <a href="https://www.3ds.com/products/3dexperience" target="_blank" rel="noreferrer noopener"><strong>Dassault Systèmes</strong></a> website (the company behind SOLIDWORKS) and create a new account.</p>



<p class="wp-block-paragraph">Click the account button at the top right.</p>



<p class="wp-block-paragraph">Choose the option to create a 3DEXPERIENCE ID.</p>



<p class="wp-block-paragraph">Fill in the required fields, starting with your email address, and click the register button.</p>



<p class="wp-block-paragraph">A message titled <strong>3DEXPERIENCE ID account &#8211; Email verification</strong> arrives at the email address you registered.</p>



<p class="wp-block-paragraph">Click the link below &quot;To validate your account,&hellip;&quot; to finish registering your account.</p>



<figure class="wp-block-image size-full is-style-stk_shadow_s"><img loading="lazy" decoding="async" width="1025" height="616" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/3dexperience-id-email-verification.png" alt="The 3DEXPERIENCE ID account email verification message, with the validation link highlighted" class="wp-image-3651" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/3dexperience-id-email-verification.png 1025w, https://sugitama-lab.tech/wp-content/uploads/2026/11/3dexperience-id-email-verification-300x180.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/3dexperience-id-email-verification-768x462.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/3dexperience-id-email-verification-485x291.png 485w" sizes="auto, (max-width: 1025px) 100vw, 1025px" /></figure>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Buy a License</h3>



<p class="wp-block-paragraph">Next, buy a SOLIDWORKS for Makers license.</p>



<p class="wp-block-paragraph">You can buy online with a billing address in the countries listed in the <a href="https://www.3ds.com/store/faq/makers" target="_blank" rel="noreferrer noopener"><strong>official Makers FAQ</strong></a>. Prices are shown in the currency linked to your billing address, so they may appear in your local currency.</p>



<p class="wp-block-paragraph">Go to the <a href="https://discover.solidworks.com/solidworks-makers" target="_blank" rel="noreferrer noopener"><strong>SOLIDWORKS for Makers</strong></a> website and click the buy button for <strong>3DEXPERIENCE SOLIDWORKS for Makers</strong>. (Do not pick SOLIDWORKS xDesign for Makers, which does not include SOLIDWORKS.)</p>



<p class="is-style-supplement-normal wp-block-paragraph">You can change the plan on the next screen, so it does not matter whether you pick yearly or monthly here.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">Click the account icon at the top right and log in with the account you just created.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">Select a subscription plan.</p>



<p class="is-style-supplement-warning wp-block-paragraph">Prices were revised on November 20, 2023. As of November 2026, Dassault&#8217;s official FAQ lists US$15 per month or US$48 per year, excluding taxes. Prices may change, so check the current price on the official site.</p>



<p class="wp-block-paragraph">If you will use it for four months or more, the yearly subscription costs less (four months of the monthly plan add up to US$60, against US$48 for a year). In this walkthrough, though, I chose the monthly subscription.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">After selecting a plan, click the button to proceed to checkout.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">Check that the information in the cart is correct, then click the button at the bottom right to go to payment.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">A form for your billing address appears. Fill in the required fields and click the next button.</p>



<p class="is-style-supplement-normal wp-block-paragraph">The individual/company selection and the name fields appear to be locked because they are linked to your 3DEXPERIENCE ID.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">The same screen has a contact section. Click the edit button to enter a phone number, read the terms of use, and check the box to agree.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">Finally, enter your payment details. Dassault&#8217;s FAQ lists Visa, Mastercard, Amex, and UPI as payment methods. After filling in everything, click the button to confirm your order.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">When the purchase is complete, a confirmation message appears.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">You will also receive two emails from Dassault Systèmes at the email address you registered.</p>



<p class="wp-block-paragraph">The first one is the subscription confirmation email.</p>



<figure class="wp-block-image size-full is-style-stk_shadow_s"><img loading="lazy" decoding="async" width="760" height="245" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/subscription-confirmation-email.png" alt="Your 3DEXPERIENCE subscription confirmation email: Your order is confirmed" class="wp-image-3652" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/subscription-confirmation-email.png 760w, https://sugitama-lab.tech/wp-content/uploads/2026/11/subscription-confirmation-email-300x97.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/subscription-confirmation-email-485x156.png 485w" sizes="auto, (max-width: 760px) 100vw, 760px" /></figure>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">The email shows the plan you chose (monthly or yearly), the subscription expiry (renewal) date, and the amount charged. Check that they are what you expect.</p>



<p class="is-style-supplement-warning wp-block-paragraph">The subscription is <strong>renewed automatically</strong> when its term ends.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">The other email tells you that your subscription is ready to use.</p>



<p class="wp-block-paragraph">Click the <strong>Launch your 3DEXPERIENCE platform</strong> button in the email and go on to the installation steps.</p>



<figure class="wp-block-image size-large is-style-stk_shadow_s"><img loading="lazy" decoding="async" width="1047" height="471" src="https://sugitama-lab.tech/wp-content/uploads/2026/11/get-started-email-launch-platform.png" alt="The Get started with your 3DEXPERIENCE subscription email, with the Launch your 3DEXPERIENCE platform button highlighted" class="wp-image-3653" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/11/get-started-email-launch-platform.png 1047w, https://sugitama-lab.tech/wp-content/uploads/2026/11/get-started-email-launch-platform-300x135.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/11/get-started-email-launch-platform-1024x461.png 1024w, https://sugitama-lab.tech/wp-content/uploads/2026/11/get-started-email-launch-platform-768x345.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/11/get-started-email-launch-platform-485x218.png 485w" sizes="auto, (max-width: 1047px) 100vw, 1047px" /></figure>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Install SOLIDWORKS Connected</h3>



<p class="wp-block-paragraph">Now it is time to install SOLIDWORKS. The installer screens in this section were captured in 2023, so what you see today may differ slightly.</p>



<p class="wp-block-paragraph">The link button in the email takes you to the 3DEXPERIENCE dashboard.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">Bookmark this link.</p>


<p class="wp-block-paragraph">If you lose it, Dassault&#8217;s FAQ says you can log in at solidworks.com/maker-cloud.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">Click the compass (the round button at the top left of the dashboard).</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">In the list on the left, click <strong>SOLIDWORKS Connected</strong>.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">If this is your first time using the 3DEXPERIENCE platform, a window appears asking you to download the 3DEXPERIENCE Launcher.</p>



<p class="wp-block-paragraph">Click the button to download the 3DEXPERIENCE Launcher, then follow the steps in that window.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">Run the 3DEXPERIENCE Launcher file you downloaded.</p>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="277" height="138" src="https://sugitama-lab.tech/wp-content/uploads/2023/10/2023-10-01_08h30_32.png" alt="The downloaded 3DEXPERIENCE Launcher installer file on the desktop" class="wp-image-1478"/></figure>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">The 3DEXPERIENCE Launcher installer starts.</p>



<p class="wp-block-paragraph">If you see no error messages, just follow the wizard on the screen.</p>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="495" height="387" src="https://sugitama-lab.tech/wp-content/uploads/2023/10/2023-09-30_14h46_01-1.png" alt="The 3DEXPERIENCE Launcher Setup welcome screen, with Next highlighted" class="wp-image-1480" srcset="https://sugitama-lab.tech/wp-content/uploads/2023/10/2023-09-30_14h46_01-1.png 495w, https://sugitama-lab.tech/wp-content/uploads/2023/10/2023-09-30_14h46_01-1-300x235.png 300w, https://sugitama-lab.tech/wp-content/uploads/2023/10/2023-09-30_14h46_01-1-485x379.png 485w" sizes="auto, (max-width: 495px) 100vw, 495px" /></figure>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="495" height="387" src="https://sugitama-lab.tech/wp-content/uploads/2023/10/2023-09-30_14h46_08.png" alt="The installation folder screen of the 3DEXPERIENCE Launcher Setup, with Install highlighted" class="wp-image-1481" srcset="https://sugitama-lab.tech/wp-content/uploads/2023/10/2023-09-30_14h46_08.png 495w, https://sugitama-lab.tech/wp-content/uploads/2023/10/2023-09-30_14h46_08-300x235.png 300w, https://sugitama-lab.tech/wp-content/uploads/2023/10/2023-09-30_14h46_08-485x379.png 485w" sizes="auto, (max-width: 495px) 100vw, 495px" /></figure>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="495" height="387" src="https://sugitama-lab.tech/wp-content/uploads/2023/10/2023-09-30_14h46_29.png" alt="The final screen of the 3DEXPERIENCE Launcher Setup, with Finish highlighted" class="wp-image-1482" srcset="https://sugitama-lab.tech/wp-content/uploads/2023/10/2023-09-30_14h46_29.png 495w, https://sugitama-lab.tech/wp-content/uploads/2023/10/2023-09-30_14h46_29-300x235.png 300w, https://sugitama-lab.tech/wp-content/uploads/2023/10/2023-09-30_14h46_29-485x379.png 485w" sizes="auto, (max-width: 495px) 100vw, 495px" /></figure>



<p class="wp-block-paragraph">Next, a message like the one below appears.</p>



<p class="wp-block-paragraph">It asks whether to trust a third-party URL. Check that the URL shown matches your 3DEXPERIENCE dashboard URL, and if it does, click <strong>Always</strong>.</p>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="413" height="211" src="https://sugitama-lab.tech/wp-content/uploads/2023/10/2023-09-30_14h47_16.png" alt="The 3DEXPERIENCE Launcher message asking to confirm a trusted URL, with Always highlighted" class="wp-image-1484" srcset="https://sugitama-lab.tech/wp-content/uploads/2023/10/2023-09-30_14h47_16.png 413w, https://sugitama-lab.tech/wp-content/uploads/2023/10/2023-09-30_14h47_16-300x153.png 300w" sizes="auto, (max-width: 413px) 100vw, 413px" /></figure>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">You return to the 3DEXPERIENCE dashboard.</p>



<p class="wp-block-paragraph">Click the option to install all roles, including SOLIDWORKS Connected. (Roles are the apps and tools your subscription gives you access to.)</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">The 3DEXPERIENCE installer starts. Click <strong>Next</strong>.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">SOLIDWORKS for Makers is a cloud-based license, so you need to check that your PC meets the cloud eligibility requirements.</p>



<p class="wp-block-paragraph">To check, click the 3DEXPERIENCE Platform on Cloud support link shown on this screen. It is the <a href="https://www.3ds.com/support/cloud/eligibility" target="_blank" rel="noreferrer noopener"><strong>same page I described above</strong></a>.</p>



<p class="wp-block-paragraph">Once you have confirmed cloud eligibility, click <strong>Next</strong>.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">Click <strong>Next</strong> on the screen that asks for the installation folder.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">Click <strong>Next</strong> on the screen that asks for the Toolbox / Hole Wizard data location.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">In some cases, a Java Runtime Environment message appears. It says that a 64-bit Java Runtime Environment (JRE) is not installed or could not be detected, and that a Java 11 runtime (for example, Oracle JDK 11.0.8 or AdoptOpenJDK OpenJ9 JRE 11.0.8) is required.</p>



<p class="wp-block-paragraph">If you see this message, install JDK 11 first.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">If no error appears, the installer continues like this. Click <strong>Install</strong> here.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">The files are downloaded and installed.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">It depends on your internet connection, but in my case it took about an hour.</p>


<p class="wp-block-paragraph">Plan for some waiting time.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">When the installation finishes, the final screen appears. Click <strong>Close</strong> to end the installation.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">That completes the installation of SOLIDWORKS Connected.</p>



<p class="wp-block-paragraph">With these steps, you can use SOLIDWORKS for Makers.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Launch SOLIDWORKS</h3>



<p class="wp-block-paragraph">To launch SOLIDWORKS for Makers, you need to log in to the 3DEXPERIENCE platform (the dashboard you bookmarked).</p>



<p class="wp-block-paragraph">From the dashboard, click <strong>SOLIDWORKS Connected</strong>.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">When SOLIDWORKS starts, a splash screen shows the logo, a 3D model, and the status.</p>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="588" height="312" src="https://sugitama-lab.tech/wp-content/uploads/2022/05/28f271095cf693d7d335b4bda7f6ded6-1.png" alt="The SOLIDWORKS Design 2026 splash screen" class="wp-image-2545" srcset="https://sugitama-lab.tech/wp-content/uploads/2022/05/28f271095cf693d7d335b4bda7f6ded6-1.png 588w, https://sugitama-lab.tech/wp-content/uploads/2022/05/28f271095cf693d7d335b4bda7f6ded6-1-300x159.png 300w, https://sugitama-lab.tech/wp-content/uploads/2022/05/28f271095cf693d7d335b4bda7f6ded6-1-485x257.png 485w" sizes="auto, (max-width: 588px) 100vw, 588px" /></figure>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">SOLIDWORKS is now running.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">It used to be displayed as &quot;SOLIDWORKS Connected Makers&quot;, but after an update it now starts with the screen above.</p>


<p class="wp-block-paragraph">I took this screenshot with SOLIDWORKS Design 2026.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">The interface is not very different from commercial SOLIDWORKS, but the icons in the FeatureManager design tree carry an additional mark: a gear with an &quot;m&quot; inside.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">Good to Know: Differences from Commercial SOLIDWORKS and Canceling</h2>



<p class="wp-block-paragraph">Two things are worth knowing before you start: how SOLIDWORKS for Makers <strong>differs from commercial SOLIDWORKS</strong>, and <strong>how to cancel</strong>.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Differences from Commercial SOLIDWORKS</h3>



<p class="wp-block-paragraph">SOLIDWORKS for Makers offers most of the functions of commercial SOLIDWORKS, but there are a few differences.</p>



<p class="wp-block-paragraph">Please check the differences carefully before you buy. Pay special attention to the things you <strong>cannot do</strong> with SOLIDWORKS for Makers.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-blue_box type_simple"><div class="box_title"><span class="span__box_title">What You Can&#8217;t Do with SOLIDWORKS for Makers</span></div><div class="cboxcomment">
<ul class="wp-block-list">
<li>Files created in SOLIDWORKS for Makers can&#8217;t be opened in commercial SOLIDWORKS</li>



<li>No technical support from Dassault Systèmes or resellers (help comes mainly from the Maker Support community)</li>



<li>Profit from selling what you make is capped at US$2,000 a year</li>
</ul>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">The differences between commercial SOLIDWORKS and SOLIDWORKS for Makers are explained in detail in this article, so please read it before you buy.</p>



<p class="wp-block-paragraph">&raquo;<a href="https://sugitama-lab.tech/en/solidworks-for-makers-review/" target="_blank" rel="noreferrer noopener"><strong>SOLIDWORKS for Makers: What You Can and Can&#8217;t Do</strong></a></p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Canceling Your Subscription</h3>



<p class="wp-block-paragraph">SOLIDWORKS for Makers is a one-year or one-month subscription.</p>



<p class="wp-block-paragraph">The subscription is <strong>renewed automatically</strong>, so if you do not want to keep using it, you need to <strong>cancel it</strong>.</p>



<p class="wp-block-paragraph">For both yearly and monthly subscriptions, you must cancel <strong>at least 5 days before the renewal date</strong>, so please be careful.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">I did not capture the cancellation screens. According to Dassault&#8217;s <a href="https://www.3ds.com/store/faq/makers" target="_blank" rel="noreferrer noopener"><strong>Makers FAQ</strong></a>, you can manage your subscription in the Subscriptions tab of your Platform Management cockpit, so start there.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">Summary</h2>



<p class="wp-block-paragraph">This article explained how to install <strong>SOLIDWORKS for Makers</strong>.</p>



<p class="wp-block-paragraph">SOLIDWORKS for Makers is a very attractive product that lets you use SOLIDWORKS at a <strong>very low price</strong>.</p>



<p class="wp-block-paragraph">For <strong>US$48 per year</strong> (as of November 2026), you can use <strong>most of SOLIDWORKS&#8217; functions</strong>. For the details, see <a href="https://sugitama-lab.tech/en/solidworks-for-makers-review/" target="_blank" rel="noreferrer noopener"><strong>my review article</strong></a>.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">SOLIDWORKS for Makers is limited to <strong>non-commercial use</strong>, so I recommend it if you want to use SOLIDWORKS for hobbies or to learn it.</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">I think SOLIDWORKS for Makers is a great tool for enjoying making things.</p>


<p class="wp-block-paragraph">I hope this guide helps you get started.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">Thank you for reading to the end.</p>
]]></content:encoded>
					
					<wfw:commentRss>https://sugitama-lab.tech/en/solidworks-for-makers-install/feed/</wfw:commentRss>
			<slash:comments>0</slash:comments>
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">3655</post-id>	</item>
		<item>
		<title>SOLIDWORKS PC Specs 2026: How to Choose the CPU, RAM, and GPU</title>
		<link>https://sugitama-lab.tech/en/solidworks-pc-specs/</link>
					<comments>https://sugitama-lab.tech/en/solidworks-pc-specs/#respond</comments>
		
		<dc:creator><![CDATA[sugitama]]></dc:creator>
		<pubDate>Sat, 07 Nov 2026 08:40:03 +0000</pubDate>
				<category><![CDATA[PC & Hardware]]></category>
		<category><![CDATA[for beginners]]></category>
		<category><![CDATA[intermediate & advanced]]></category>
		<category><![CDATA[makers]]></category>
		<category><![CDATA[speed & performance]]></category>
		<category><![CDATA[workstation]]></category>
		<guid isPermaLink="false">https://sugitama-lab.tech/?p=3645</guid>

					<description><![CDATA[Memory, CPU, or graphics card: which should you spend on first? A working engineer explains how to choose PC specs for SOLIDWORKS in 2026.]]></description>
										<content:encoded><![CDATA[
<p class="wp-block-paragraph">&#8220;Every time I open the assembly, I have time to make coffee&#8230;&#8221;</p>



<p class="wp-block-paragraph">&#8220;I just rotate the model a little and the screen stutters, so I can&#8217;t even select the face I want&#8230;&#8221;</p>



<p class="wp-block-paragraph">Do these <strong>waiting times</strong> frustrate you in your daily design work?</p>



<p class="wp-block-paragraph">When you design in SOLIDWORKS, <strong>how fast your PC runs directly affects both your efficiency and your stress level</strong>.</p>



<p class="wp-block-paragraph">But <strong>simply buying an expensive PC doesn&#8217;t guarantee that SOLIDWORKS will run faster</strong>.</p>



<p class="wp-block-paragraph">When you choose a PC, you need to focus on the hardware components that actually matter to SOLIDWORKS.</p>



<p class="wp-block-paragraph">If you miss them, even an expensive workstation won&#8217;t feel comfortable.</p>



<p class="wp-block-paragraph">On the other hand, if you get them right, you can build a smooth setup even on a limited budget.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">In this article, I, a working mechanical engineer, explain how to choose the right PC the first time.</p>



<p class="wp-block-paragraph">Let&#8217;s get you a setup where you can forget about spec-related stress and focus on your design work!</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">The Short Answer: Recommended SOLIDWORKS Specs at a Glance (2026)</h2>



<p class="wp-block-paragraph">The specs you need depend on <strong>how many parts your assemblies contain and what you use SOLIDWORKS for</strong>.</p>



<p class="wp-block-paragraph">Find your own use in the table below and pick the matching class.</p>



<figure class="wp-block-table stk-table-thdesign is-style-regular"><table class="has-fixed-layout"><thead><tr><th>Class</th><th class="has-text-align-center" data-align="center"><strong>Number of parts</strong><br><strong>(rough guide)</strong></th><th class="has-text-align-center" data-align="center"><strong>CPU </strong><br><strong>(latest generation)</strong></th><th class="has-text-align-center" data-align="center"><strong>Memory</strong></th><th><strong>Graphics card</strong><br><strong> (GPU)</strong></th><th><strong>Typical use</strong></th></tr></thead><tbody><tr><td><strong>Entry</strong><br><span class="pre--font-size span-stk-fs-ss">(personal / SOLIDWORKS for Makers)</span></td><td class="has-text-align-center" data-align="center"><strong>Up to 500</strong></td><td class="has-text-align-center" data-align="center">Core Ultra 5<br>Core i5</td><td class="has-text-align-center" data-align="center">16 GB</td><td>RTX 500 / 1000 Ada<br><span class="pre--font-size span-stk-fs-ss">(formerly T600 / T1000)</span></td><td>&bull; Part modeling<br>&bull; Simple jigs<br>&bull; Learning</td></tr><tr><td><strong>Mid-range</strong><br><span class="pre--font-size span-stk-fs-ss">(professional work)</span></td><td class="has-text-align-center" data-align="center"><strong>501 to 10,000</strong></td><td class="has-text-align-center" data-align="center">Core Ultra 7<br>Core i7</td><td class="has-text-align-center" data-align="center">32 GB</td><td>RTX 2000 Ada<br><span class="pre--font-size span-stk-fs-ss">(formerly RTX A2000)</span></td><td>&bull; Product design<br>&bull; Machine design</td></tr><tr><td><strong>High-end</strong><br><span class="pre--font-size span-stk-fs-ss">(simulation / large assemblies)</span></td><td class="has-text-align-center" data-align="center"><strong>Over 10,000</strong></td><td class="has-text-align-center" data-align="center">Core Ultra 9<br>Core i9 / Xeon</td><td class="has-text-align-center" data-align="center">64 GB or more</td><td>RTX 4000 Ada or higher<br><span class="pre--font-size span-stk-fs-ss">(formerly RTX A4000 or higher)</span></td><td>&bull; Large-scale equipment<br>&bull; Simulation (CAE)<br>&bull; Rendering</td></tr></tbody></table></figure>



<p class="wp-block-paragraph">&nbsp;</p>



<div class="wp-block-stk-plugin-supplement2 supplement is-style-succes">
<p class="wp-block-paragraph"><strong>If you can&#8217;t decide, mid-range is the right choice</strong></p>



<p class="wp-block-paragraph">For many professional designers, the mid-range combination (<strong>Core Ultra 7 + 32 GB of memory + RTX 2000 Ada</strong>) is <strong>the best balance of price and performance</strong>.</p>



<p class="wp-block-paragraph">Unless you work with assemblies of over 10,000 parts or run advanced fluid simulations, this configuration should <strong>keep you from feeling stressed by a lack of specs.</strong></p>



<p class="wp-block-paragraph">It is not overkill. Think of it as the baseline for comfortable design work.</p>
</div>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">Official SOLIDWORKS System Requirements</h2>



<p class="wp-block-paragraph">The PC specs needed to run SOLIDWORKS are published on the <a href="https://www.solidworks.com/support/system-requirements" target="_blank" rel="noreferrer noopener"><strong>SOLIDWORKS website</strong></a>. Here are the main items (checked on November 7, 2026).</p>



<figure class="wp-block-table stk-table-thdesign is-style-regular"><table class="has-fixed-layout"><thead><tr><th>Item</th><th>Official requirement</th></tr></thead><tbody><tr><td><strong>Operating system</strong></td><td>Windows 11, 64-bit.<br>Windows 10, 64-bit: supported up to SOLIDWORKS 2025 SP5, not supported in SOLIDWORKS 2026</td></tr><tr><td><strong>Processor</strong></td><td>x86_64 (Intel 64 or AMD64)</td></tr><tr><td><strong>Memory (RAM)</strong></td><td>16 GB (32 GB recommended)</td></tr><tr><td><strong>Graphics / GPU</strong></td><td>Certified cards and drivers</td></tr><tr><td><strong>Drive</strong></td><td>SSD recommended for optimal performance</td></tr></tbody></table></figure>



<p class="wp-block-paragraph">With these official requirements in mind, I explain below how I decide on a configuration.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">The Golden Rule of Budgeting: Prioritize Memory &gt; CPU &gt; Graphics Card</h2>



<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="1024" height="350" src="https://sugitama-lab.tech/wp-content/uploads/2026/02/momori-1024x350.png" alt="Icons of RAM, a CPU, and a graphics card (GPU)" class="wp-image-2454" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/02/momori-1024x350.png 1024w, https://sugitama-lab.tech/wp-content/uploads/2026/02/momori-300x103.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/02/momori-768x263.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/02/momori-485x166.png 485w, https://sugitama-lab.tech/wp-content/uploads/2026/02/momori.png 1292w" sizes="auto, (max-width: 1024px) 100vw, 1024px" /></figure>



<p class="wp-block-paragraph">Nobody has an unlimited PC budget.</p>



<p class="wp-block-paragraph">To get a comfortable setup at a good price, the surest approach is to invest in this order: <strong>&#8220;remove the risk of it not working,&#8221; then &#8220;buy speed.&#8221;</strong></p>



<p class="wp-block-paragraph">My priority order is <strong>&#8220;Memory &gt; CPU &gt; Graphics card.&#8221;</strong></p>



<p class="wp-block-paragraph">You might think, &#8220;Isn&#8217;t the graphics card (GPU) the most important?&#8221; But when it comes to budget allocation, it actually comes third. Here is why.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">[Top priority] Memory (the key to stability)</h3>



<p class="wp-block-paragraph">This is a hard minimum.</p>



<p class="wp-block-paragraph">If you <strong>don&#8217;t have enough memory</strong> for the amount you need (for example, the recommended 32 GB), SOLIDWORKS doesn&#8217;t just slow down. It can <strong>crash or freeze, and you can&#8217;t get any work done.</strong></p>



<p class="wp-block-paragraph">Before you chase speed, think of it as buying stability first, and secure the memory before anything else.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">[Second] CPU (the key to saving time)</h3>



<p class="wp-block-paragraph">Once stability is secured, the next investment is in <strong>reducing waiting time</strong>.</p>



<p class="wp-block-paragraph"><strong>SOLIDWORKS processing speed depends heavily on CPU performance.</strong></p>



<p class="wp-block-paragraph">If you want to cut the few seconds of waiting you face every day and boost your efficiency dramatically, spend your money on the CPU.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">[Third] Graphics card (depends on your budget)</h3>



<p class="wp-block-paragraph">Last is the part that determines <strong>how smooth the screen feels</strong>.</p>



<p class="wp-block-paragraph">A more powerful card is of course better, but today&#8217;s SOLIDWORKS-certified graphics cards are <strong>surprisingly capable even at the entry level (RTX 500 / 1000 Ada and similar)</strong>, and for small models they run reasonably well.</p>



<p class="wp-block-paragraph">Even if you lower the grade of the card a little, you can still get your work done, so I think it&#8217;s best to decide on the graphics card last, based on your budget.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">

<p class="wp-block-paragraph">Here&#8217;s the short version. Memory gives you <strong>peace of mind that it won&#8217;t crash</strong>, the CPU buys you <strong>processing speed</strong>, and the graphics card buys you <strong>smooth motion on screen</strong>!</p>

</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">A Detailed Guide to Choosing Each Part</h2>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="1022" height="754" src="https://sugitama-lab.tech/wp-content/uploads/2026/02/Gemini_Generated_Image_wox4kewox4kewox4.png" alt="A desktop PC with its case open, a graphics card, a keyboard, and a monitor showing a PC specs selection guide" class="wp-image-2455" srcset="https://sugitama-lab.tech/wp-content/uploads/2026/02/Gemini_Generated_Image_wox4kewox4kewox4.png 1022w, https://sugitama-lab.tech/wp-content/uploads/2026/02/Gemini_Generated_Image_wox4kewox4kewox4-300x221.png 300w, https://sugitama-lab.tech/wp-content/uploads/2026/02/Gemini_Generated_Image_wox4kewox4kewox4-768x567.png 768w, https://sugitama-lab.tech/wp-content/uploads/2026/02/Gemini_Generated_Image_wox4kewox4kewox4-485x358.png 485w" sizes="auto, (max-width: 1022px) 100vw, 1022px" /></figure>



<p class="wp-block-paragraph">Let&#8217;s look at what to base each choice on. The impact stars show how much each part affects how SOLIDWORKS feels in use, which is a separate ranking from the budget priority above.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">OS: Windows 11 (64-bit) is the only choice for a new PC</h3>



<ul class="wp-block-list">
<li><strong>Impact:</strong> ★★★★★ <strong>(prerequisite)</strong></li>



<li><strong>Role:</strong> The foundation that runs your PC.</li>



<li><strong>How to choose:</strong><ul><li>Microsoft has ended support for Windows 10, so it is a security risk. SOLIDWORKS 2026 doesn&#8217;t support it either (see the table above). Be sure to choose <strong>Windows 11</strong>.</li></ul>
<ul class="wp-block-list">
<li><strong>For Mac users:</strong> SOLIDWORKS is <strong>not available for macOS</strong>. The official system requirements also state that Apple Mac machines running Windows with Boot Camp (Apple&#8217;s feature for running Windows on a Mac) are not supported, so be sure to get a Windows PC.</li>
</ul>
</li>
</ul>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">CPU: clock speed matters more than core count</h3>



<ul class="wp-block-list">
<li><strong>Impact:</strong> ★★★★★ <strong>(processing speed)</strong></li>



<li><strong>Role:</strong> Calculations such as rebuilding, creating features, and opening files.</li>



<li><strong>How to choose:</strong><br>SOLIDWORKS modeling work is basically done on <strong>a single core</strong>. So a CPU with fewer cores but a <strong>higher clock speed per core</strong> will run faster than one with many cores.</li>



<li><strong>Guideline:</strong> Check the &#8220;maximum turbo frequency&#8221; on the spec sheet and choose a CPU with <strong>4.0 GHz or higher</strong> (4.5 GHz or higher is better). If it reaches 4.0 GHz or higher, even a used CPU is likely to run smoothly.</li>
</ul>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph"><span class="pre--maker span-stk-maker-pink"><strong>Recommended series:</strong> <strong>Intel Core Ultra series</strong></span></p>



<p class="wp-block-paragraph">The official requirements only list an x86_64 processor (Intel 64 or AMD64) and do not name a specific series, so the Intel series below are my own recommendation.</p>



<ul class="wp-block-list">
<li><strong>Core Ultra 5</strong>: for tight budgets and learning</li>



<li><strong>Core Ultra 7</strong>: right in the middle of professional work (recommended)</li>



<li><strong>Core Ultra 9</strong>: high-end</li>
</ul>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="is-style-supplement-warning wp-block-paragraph"><strong>What to avoid:</strong> Celeron, Pentium, and Atom are <strong>too underpowered</strong> to run SOLIDWORKS.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="is-style-supplement-hint wp-block-paragraph"><strong>By the way, do you need a Xeon?</strong><br>For general design work, <strong>Core Ultra is enough</strong> (and often faster).<br>Xeon shows its real value in places like a <strong>simulation server</strong> that runs around the clock.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<div class="supplement">

<p class="wp-block-paragraph"><strong>Note: when many cores pay off</strong></p>


<p class="wp-block-paragraph">Clock speed comes first, but if you often do the following work, a CPU with more cores gives you an advantage.</p>


<ul class="wp-block-list">

<li><strong>Structural analysis (CAE):</strong> It involves huge matrix calculations, so <strong>parallel processing on multiple cores</strong> helps a lot. Speed does not grow in proportion to the core count, though, and it levels off at some point. It is generally said that the benefit is large up to <strong>about 8 to 12 cores</strong>.</li>


<li><strong>Rendering:</strong> <strong>Multi-core performance</strong> helps almost linearly.</li>


<li><strong>Drawing processing:</strong> Tasks such as hidden line removal (calculating overlapping lines) in drawings are processed on multiple cores in the background.</li>


<li><strong>Multitasking:</strong> If you use many apps at once alongside SOLIDWORKS, such as a browser and Excel, having multiple cores makes things more stable.</li>

</ul>

</div>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Memory (RAM): the new standard in 2026 is 32 GB</h3>



<ul class="wp-block-list">
<li><strong>Impact:</strong> ★★★☆☆ <strong>(stability)</strong></li>



<li><strong>Role:</strong> The size of your work desk. Running short can cause crashes and freezes.</li>



<li><strong>How to choose:</strong><br>Memory is not a part that &#8220;makes things faster&#8221; but a part that &#8220;keeps things from getting slower.&#8221; If the desk (memory) is small, you end up working with your data on the floor (the SSD), and everything becomes painfully slow.</li>



<li><strong>Guideline:</strong>
<ul class="wp-block-list">
<li><strong>16 GB:</strong> <strong>[Minimum]</strong> This is the official minimum system requirement, but in real work it fills up quickly once you open Excel or a browser alongside SOLIDWORKS. Think of it as a starter level for learning.</li>



<li><strong>32 GB:</strong> <strong>[Recommended]</strong> This is the official recommended system requirement and the standard for real work. You can design comfortably even with other apps open.</li>
</ul>
</li>
</ul>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph"><span class="pre--maker span-stk-maker-pink"> <strong>Recommended memory sizes:</strong></span></p>



<ul class="wp-block-list">
<li><strong>16 GB:</strong> For getting started and learning (SOLIDWORKS for Makers, for example). Fine for simple parts.</li>



<li><strong>32 GB:</strong> The standard for real work. You can design comfortably even while looking things up in a browser.</li>



<li><strong>64 GB or more:</strong> Strongly recommended for large assemblies (over 10,000 parts) and structural analysis (CAE).</li>
</ul>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Graphics card: NVIDIA RTX (formerly Quadro)</h3>



<ul class="wp-block-list">
<li><strong>Impact:</strong> ★★★★☆ <strong>(comfort and display)</strong></li>



<li><strong>Role:</strong> Display processing such as rotating, zooming, and panning the model.</li>



<li><strong>How to choose:</strong><br>If this part is weak, the model stutters when you rotate it and the stress builds up. Gaming cards (GeForce) are good at effects like explosions, while CAD cards (RTX/Quadro) are good at drawing accurate lines (OpenGL). <strong>For work, choose a CAD graphics card</strong>. The official requirements also call for certified cards and drivers.</li>



<li><strong>Guideline (graphics memory):</strong>
<ul class="wp-block-list">
<li><strong>4 GB: [Minimum]</strong> Works for learning.</li>



<li><strong>8 GB to 12 GB: [Recommended]</strong> The class to choose if you want to work comfortably.</li>



<li><strong>24 GB or more: [Power machine]</strong> For simulation or large assemblies.</li>
</ul>
</li>
</ul>



<p class="wp-block-paragraph">&nbsp;</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">

<p class="wp-block-paragraph">CAD graphics cards have model names that start with &#8220;<strong>NVIDIA RTX</strong>,&#8221; &#8220;<strong>NVIDIA T</strong>,&#8221; or &#8220;<strong>Quadro</strong>.&#8221; Cards named &#8220;GeForce&#8221; are the gaming ones.</p>

</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="is-style-supplement-normal wp-block-paragraph"><strong>By the way, why not the gaming card &#8220;GeForce&#8221;?</strong><br>It does run, but you may see display problems such as <strong>&#8220;lines disappear,&#8221; &#8220;faces can&#8217;t be selected,&#8221; or &#8220;RealView doesn&#8217;t work.&#8221;</strong> (RealView Graphics is SOLIDWORKS&#8217; realistic display mode.)<br>It may be good enough for hobby or learning use, but for work, choose a CAD card to avoid the risk.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph"><strong><span class="pre--maker span-stk-maker-pink">Recommended models (as of 2026):</span></strong></p>



<ul class="wp-block-list">
<li><strong>Entry:</strong> RTX 500 Ada / RTX 1000 Ada (for small models)</li>



<li><strong>Mid-range:</strong> <strong>RTX 2000 Ada</strong> (when in doubt, this one! The best-value standard for work)</li>



<li><strong>High-end:</strong> RTX 4000 Ada / 5000 Ada (for large assemblies, VR, and rendering)</li>
</ul>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Storage: time to leave HDDs behind. SSD is the only choice</h3>



<ul class="wp-block-list">
<li><strong>Impact:</strong> ★★★★☆ <strong>(startup speed)</strong></li>



<li><strong>Role:</strong> Starting the OS and software, and reading and writing data.</li>



<li><strong>How to choose:</strong><br>There is not much to debate here. On a PC whose system drive (C drive) is an HDD, you wait minutes just for it to start up.<br>Be sure to choose a model with an <strong>SSD</strong> (512 GB or more). The official requirements also recommend an SSD. Use an HDD only for backup storage.</li>
</ul>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph"><strong><span class="pre--maker span-stk-maker-pink">Capacity:</span></strong></p>



<ul class="wp-block-list">
<li><strong>512 GB:</strong> The minimum. It tends to fill up once you install the OS and apps.</li>



<li><strong>1 TB:</strong> Recommended. You won&#8217;t have to worry as your data grows.</li>
</ul>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">Which Part of Your PC Is the Problem? Symptoms and Fixes (FAQ)</h2>



<p class="wp-block-paragraph">&#8220;My current PC feels slow, but I can&#8217;t tell why&#8230;&#8221;</p>



<p class="wp-block-paragraph">For anyone with that problem, here are common symptoms and the part most likely responsible.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Q1. Opening files is slow, or rebuilds never finish</h3>



<ul class="wp-block-list">
<li><strong>The culprit is&#8230; the CPU or the storage</strong></li>



<li><strong>Explanation:</strong> How long you wait depends on calculation speed (CPU) or data loading speed (storage).</li>



<li><strong>Fix:</strong><ul><li>Check the disk usage in Task Manager. If you are using an HDD, switching to an SSD alone can make a dramatic difference.</li></ul>
<ul class="wp-block-list">
<li>If you already have an SSD, the CPU clock speed is the limit. Consider replacing the PC.</li>
</ul>
</li>
</ul>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Q2. The model stutters or leaves ghost trails when I rotate it</h3>



<ul class="wp-block-list">
<li><strong>The culprit is&#8230; the graphics card</strong></li>



<li><strong>Explanation:</strong> The display processing can&#8217;t keep up. There are mainly two possible patterns.<ul><li><strong>You are using a GeForce:</strong> Gaming cards are not good at the display processing CAD needs, so they can stutter even on high-spec models.</li></ul>
<ul class="wp-block-list">
<li><strong>You are using a certified card that is underpowered:</strong> Even with a Quadro or RTX series card, an entry-level model (such as the T1000) can stutter from lack of power when you rotate a large assembly.</li>
</ul>
</li>



<li><strong>Fix:</strong>
<ul class="wp-block-list">
<li>Review the settings under <strong>System Options</strong> &gt; <strong>Performance</strong> in SOLIDWORKS.</li>



<li>If that doesn&#8217;t help, consider moving up to a higher-tier graphics card (for example, from RTX 500 to RTX 2000 or higher).</li>
</ul>
</li>
</ul>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">Q3. It suddenly crashes (shuts down) or freezes while I work</h3>



<ul class="wp-block-list">
<li><strong>The culprit is&#8230; the memory</strong></li>



<li><strong>Explanation:</strong> This is the most dangerous symptom. The work desk (memory) is full for the task, and the PC has hit its limit. If the mouse pointer still moves but SOLIDWORKS freezes, or the software suddenly shuts down, it is most likely a lack of memory.</li>



<li><strong>Fix:</strong>
<ul class="wp-block-list">
<li>Add more memory.</li>



<li>Changing settings can&#8217;t solve this one. It is the top priority to invest in before your work grinds to a halt.</li>
</ul>
</li>
</ul>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">Summary: Invest in the Right Work Tool</h2>



<p class="wp-block-paragraph">In this article, I explained how to choose specs so that SOLIDWORKS runs comfortably.</p>



<ul class="wp-block-list">
<li><strong>Budget priority:</strong> Memory &gt; CPU &gt; Graphics card</li>



<li><strong>Memory:</strong> 32 GB is the standard for real work</li>



<li><strong>CPU:</strong> Clock speed matters more than core count</li>



<li><strong>Graphics card:</strong> Decide based on your budget</li>
</ul>



<p class="wp-block-paragraph">If you stick to these criteria, you won&#8217;t be stressed by lack of specs, and you won&#8217;t regret buying an unnecessarily expensive PC.</p>



<p class="wp-block-paragraph">A workstation is a &#8220;work tool&#8221; that lets you make the most of your design skills and generate profit.</p>



<p class="wp-block-paragraph"><strong>Investing in a workstation comes back to you as work efficiency.</strong></p>



<p class="wp-block-paragraph">I hope this article helps you find the PC that suits you best.</p>

]]></content:encoded>
					
					<wfw:commentRss>https://sugitama-lab.tech/en/solidworks-pc-specs/feed/</wfw:commentRss>
			<slash:comments>0</slash:comments>
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">3645</post-id>	</item>
		<item>
		<title>Autodesk Fusion vs SOLIDWORKS for Beginners: Which Free or Low-Cost 3D CAD Should You Pick?</title>
		<link>https://sugitama-lab.tech/en/fusion-vs-solidworks/</link>
					<comments>https://sugitama-lab.tech/en/fusion-vs-solidworks/#respond</comments>
		
		<dc:creator><![CDATA[sugitama]]></dc:creator>
		<pubDate>Fri, 06 Nov 2026 15:42:31 +0000</pubDate>
				<category><![CDATA[Columns & Comparisons]]></category>
		<category><![CDATA[for beginners]]></category>
		<category><![CDATA[makers]]></category>
		<category><![CDATA[students & education]]></category>
		<guid isPermaLink="false">https://sugitama-lab.tech/?p=3638</guid>

					<description><![CDATA[Autodesk Fusion for personal use or SOLIDWORKS for Makers? Compare price, limits, OS support, and who each beginner-friendly 3D CAD suits best.]]></description>
										<content:encoded><![CDATA[
<p class="wp-block-paragraph">Bringing in 3D CAD has plenty of advantages for making things.</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-blue_box type_simple"><div class="box_title"><span class="span__box_title">Main Benefits of 3D CAD</span></div><div class="cboxcomment">
<ul class="wp-block-list stk-list-icon--stylenone">
<li>Models are easy to understand visually, and you can <strong>cut rework</strong> caused by interference between parts</li>



<li>You can easily design <strong>complex shapes and curves</strong> that 2D CAD can&#8217;t express</li>



<li>You can <strong>quickly make prototypes</strong> with a 3D printer or similar</li>



<li>You can <strong>easily get design information</strong> such as weight, center of gravity, surface area, and volume</li>
</ul>
</div></div>



<p class="wp-block-paragraph">These are only a few examples. But do you ever find yourself thinking,</p>



<p class="wp-block-paragraph"><strong>&#8220;I want to start 3D CAD, but the software is too expensive for me&#8221;</strong></p>



<p class="wp-block-paragraph"><strong>&#8220;I can&#8217;t tell which one is actually worth learning for work&#8221;</strong></p>



<p class="wp-block-paragraph">3D CAD software once cost a small fortune, but today <strong>you can use capable 3D CAD for free, or for as little as US$48 a year</strong>, within the terms of each license.</p>



<p class="wp-block-paragraph">As a working mechanical engineer, I compare two 3D CAD programs that I can confidently recommend: <strong>Autodesk Fusion</strong> (formerly Fusion 360) and <strong>SOLIDWORKS</strong>.</p>



<p class="wp-block-paragraph">I also point out <strong>pitfalls</strong> such as &#8220;the limits of the free version&#8221; and &#8220;data compatibility of SOLIDWORKS for Makers.&#8221;</p>



<p class="wp-block-paragraph">&nbsp;</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_simple"><div class="box_title"><span class="span__box_title">Who This Article Is For</span></div><div class="cboxcomment">
<ul class="wp-block-list">
<li>You&#8217;re adopting 3D CAD for the first time and don&#8217;t know which one to use.</li>



<li>You want to keep the cost of getting started as low as possible.</li>



<li>You want to try designing in 3D CAD.</li>



<li>You want to use 3D CAD as a hobby.</li>



<li>You want to practice and study 3D CAD.</li>
</ul>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">Autodesk Fusion (Formerly Fusion 360)</h2>



<figure class="wp-block-image size-large"><img loading="lazy" decoding="async" width="1024" height="594" src="https://sugitama-lab.tech/wp-content/uploads/2022/04/fusion.360JPG-1024x594.jpg" alt="Autodesk Fusion 360 logo over an illustration of a mechanical assembly" class="wp-image-248" srcset="https://sugitama-lab.tech/wp-content/uploads/2022/04/fusion.360JPG-1024x594.jpg 1024w, https://sugitama-lab.tech/wp-content/uploads/2022/04/fusion.360JPG-300x174.jpg 300w, https://sugitama-lab.tech/wp-content/uploads/2022/04/fusion.360JPG-768x445.jpg 768w, https://sugitama-lab.tech/wp-content/uploads/2022/04/fusion.360JPG-485x281.jpg 485w, https://sugitama-lab.tech/wp-content/uploads/2022/04/fusion.360JPG.jpg 1069w" sizes="auto, (max-width: 1024px) 100vw, 1024px" /></figure>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">The product is now called <strong>&#8220;Autodesk Fusion&#8221;</strong>, formerly &#8220;Fusion 360.&#8221;</p>



<p class="wp-block-paragraph">It is a modern 3D CAD program that manages data in the cloud.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_ttl"><div class="box_title"><span class="span__box_title">Autodesk Fusion at a Glance</span></div><div class="cboxcomment">
<p class="is-style-default has-mainttlbg-color has-text-color has-link-color wp-elements-1 wp-block-paragraph"><strong>Free for personal use, and a paid plan for business</strong></p>



<p class="wp-block-paragraph">Its biggest appeal is that <strong>Autodesk Fusion for personal use</strong> is <strong>free</strong> for personal, non-commercial projects. As of November 2026, Autodesk limits it to individuals with annual revenue under US$1,000, and it may not be used at your primary place of work, in a company environment, or for commercial training.</p>



<p class="wp-block-paragraph">It is also a reduced version: limited CAM, single-user data management, limited electronics and PCB designs, limited 2D drawings, forum support only, and limited import/export file types.</p>



<p class="wp-block-paragraph">The paid plan includes CAM, CAE, and PCB tools (see the price below).</p>



<p class="has-mainttlbg-color has-text-color has-link-color wp-elements-2 wp-block-paragraph"><strong>Good news for Mac users</strong></p>



<p class="wp-block-paragraph">While many professional CAD programs (including SOLIDWORKS) run only on Windows, Fusion <strong>supports macOS</strong> as well as Windows. You can design at a coffee shop on your MacBook.</p>



<p class="has-mainttlbg-color has-text-color has-link-color wp-elements-3 wp-block-paragraph"><strong>Organic surface design with Form</strong></p>



<p class="wp-block-paragraph">With the &#8220;Form&#8221; (sculpting) tools, you can shape <strong>organic curved surfaces intuitively</strong>, as if kneading clay. Which features you get depends on the plan.</p>
</div></div>



<p class="wp-block-paragraph"><strong>Price (paid plan):</strong> US$680 per year or US$85 per month on Autodesk&#8217;s US site, as of November 2026</p>



<p class="wp-block-paragraph">*Prices may vary by region and promotion, so please check Autodesk&#8217;s official site.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">In a nutshell, Autodesk Fusion is a <strong>versatile 3D CAD program</strong> that works on a <strong>Mac</strong> too and covers everything from <strong>hobby projects to startups</strong>. It&#8217;s a friendly place to start.</p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">SOLIDWORKS (and SOLIDWORKS for Makers)</h2>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="715" height="404" src="https://sugitama-lab.tech/wp-content/uploads/2022/04/2022-04-15_05h23_13.png" alt="SOLIDWORKS banner reading Authentic Design Experience, over an image of a mechanical assembly" class="wp-image-256" srcset="https://sugitama-lab.tech/wp-content/uploads/2022/04/2022-04-15_05h23_13.png 715w, https://sugitama-lab.tech/wp-content/uploads/2022/04/2022-04-15_05h23_13-300x170.png 300w, https://sugitama-lab.tech/wp-content/uploads/2022/04/2022-04-15_05h23_13-485x274.png 485w" sizes="auto, (max-width: 715px) 100vw, 715px" /><figcaption class="wp-element-caption">Image source: SOLIDWORKS (https://www.3ds.com/products-services/solidworks/)</figcaption></figure>



<p class="wp-block-paragraph"><strong>SOLIDWORKS:</strong> a tool widely used in manufacturing</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">If you are <strong>serious about designing for a living</strong> or <strong>aiming to become an engineer, it&#8217;s the one to pick</strong>. That&#8217;s my honest opinion as a working engineer.</p>
</div></div>



<p class="wp-block-paragraph">SOLIDWORKS is a 3D CAD program widely used in mechanical design.</p>



<p class="wp-block-paragraph">Being able to operate it can be <strong>a real asset when changing jobs or advancing your career</strong>.</p>



<div class="wp-block-stk-plugin-cbox cbox intitle is-style-site_color type_ttl"><div class="box_title"><span class="span__box_title">SOLIDWORKS at a Glance</span></div><div class="cboxcomment">
<p class="is-style-default has-mainttlbg-color has-text-color has-link-color wp-elements-4 wp-block-paragraph"><strong><strong>Used at many companies</strong></strong></p>



<p class="wp-block-paragraph">SOLIDWORKS is a 3D CAD program that <strong>companies use widely</strong>. In the 2021 CNCCookbook survey below, SolidWorks ranked first among professional users. If you can handle SOLIDWORKS, you may be able to <strong>contribute at a company quickly</strong>.</p>



<figure class="wp-block-image size-full"><img loading="lazy" decoding="async" width="768" height="679" src="https://sugitama-lab.tech/wp-content/uploads/2022/04/CADProMarketShare.jpg" alt="Bar chart of CAD package usage among professional users from the CNCCookbook 2021 survey, with SOLIDWORKS at the top" class="wp-image-251" srcset="https://sugitama-lab.tech/wp-content/uploads/2022/04/CADProMarketShare.jpg 768w, https://sugitama-lab.tech/wp-content/uploads/2022/04/CADProMarketShare-300x265.jpg 300w, https://sugitama-lab.tech/wp-content/uploads/2022/04/CADProMarketShare-485x429.jpg 485w" sizes="auto, (max-width: 768px) 100vw, 768px" /><figcaption class="wp-element-caption">Source: CNCCookbook (https://www.cnccookbook.com/)</figcaption></figure>



<p class="has-mainttlbg-color has-text-color has-link-color wp-elements-5 wp-block-paragraph"><strong><strong>SOLIDWORKS for Makers: US$48 a year for personal use</strong></strong></p>



<p class="wp-block-paragraph">It used to be hard for an individual to adopt, but the arrival of <strong>&#8220;SOLIDWORKS for Makers&#8221;</strong> changed that. According to the official FAQ, it costs <strong>US$48 a year or US$15 a month</strong> (excluding taxes) and is meant for personal projects and non-commercial use.</p>



<p class="has-mainttlbg-color has-text-color has-link-color wp-elements-6 wp-block-paragraph"><strong>Rich in design-focused features</strong></p>



<p class="wp-block-paragraph">Fusion&#8217;s paid plan includes CAM, while SOLIDWORKS offers a wide range of features from the designer&#8217;s point of view. <strong>SOLIDWORKS for Makers includes SimulationXpress for basic strength analysis.</strong></p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<div class="wp-block-stk-plugin-voicecomment voice comment_gray l icon_red"><figure class="icon"><img loading="lazy" decoding="async" class="voice_icon__img" src="https://sugitama-lab.tech/wp-content/uploads/2021/12/illust_MEGANE_prf.png" width="100" height="100" alt=""/><figcaption class="avatar-name name">sugitama</figcaption></figure><div class="voicecomment">
<p class="wp-block-paragraph">&#8220;SOLIDWORKS for Makers&#8221; is the low-priced way to get started with SOLIDWORKS. It is meant for personal projects and non-commercial use. The article below shows how to get started.</p>



<p class="wp-block-paragraph">»<strong><a href="https://sugitama-lab.tech/en/solidworks-for-makers-install/" target="_blank" rel="noreferrer noopener">How to Install SOLIDWORKS for Makers: Buy, Install, and Launch Step by Step</a></strong></p>
</div></div>



<p class="wp-block-paragraph">&nbsp;</p>



<h2 class="wp-block-heading">Side-by-Side Comparison</h2>



<p class="wp-block-paragraph">Here is a table summarizing the differences so far. Choose according to your own situation and goals.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<figure class="wp-block-table stk-table-thdesign is-style-stripes"><table class="has-fixed-layout"><thead><tr><td><strong>Item</strong></td><td><strong>Autodesk Fusion (personal use)</strong></td><td><strong>SOLIDWORKS for Makers</strong></td></tr></thead><tbody><tr><td><strong>Main uses</strong></td><td>Hobbies, 3D printing, design</td><td>Serious mechanical design, learning, DIY</td></tr><tr><td><strong>Price</strong></td><td><strong>Free</strong> (personal, non-commercial use)</td><td>US$48 per year or US$15 per month</td></tr><tr><td><strong>Commercial use</strong></td><td>Personal, non-commercial use only (see the eligibility conditions above)</td><td>Non-commercial use; you may sell items you make for a profit of up to US$2,000 a year</td></tr><tr><td><strong>CAE (simulation)</strong></td><td>Not mentioned in Autodesk&#8217;s personal-use feature list (the paid plan includes CAE)</td><td><strong>Basic strength analysis with SimulationXpress</strong></td></tr><tr><td><strong>Operating system</strong></td><td>Windows / <strong>macOS supported</strong></td><td>Windows only (<strong>not available for Mac</strong>)</td></tr><tr><td><strong>Data management</strong></td><td>Cloud-based</td><td>Cloud (3DEXPERIENCE)</td></tr><tr><td><strong>Caveats</strong></td><td>The personal-use version has limited functionality, such as limited import/export file types</td><td>Files are watermarked and can only be opened with a Makers license, so you can&#8217;t exchange native files with a commercial license</td></tr></tbody></table></figure>



<p class="wp-block-paragraph"></p>



<p class="wp-block-paragraph"></p>



<h2 class="wp-block-heading">Summary</h2>



<p class="wp-block-paragraph">I&#8217;ve covered 3D CAD programs that I recommend for beginners.</p>



<p class="wp-block-paragraph">I get the impression that many people used to 2D CAD are put off by 3D CAD without having tried it. But with some modeling practice, I think it isn&#8217;t that hard to learn.</p>



<p class="wp-block-paragraph">Once you get used to 3D CAD, you can create shapes just the way you imagine them, and watching them come together as an assembly is a ton of fun.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<h3 class="wp-block-heading">The Verdict: Which One Should You Choose?</h3>



<p class="wp-block-paragraph">If you can&#8217;t decide, choose by the following criteria.</p>



<p class="is-style-simple_bg-gray wp-block-paragraph"><strong>&#8220;I want to start for free, no matter what,&#8221; &#8220;I use a Mac,&#8221; &#8220;I want to create smooth shapes like figurines&#8221;</strong> </p>



<p class="wp-block-paragraph"><strong>→</strong> Download <strong>Autodesk Fusion</strong> now! Start by experiencing the joy of 3D modeling for free.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="is-style-simple_bg-gray wp-block-paragraph"><strong>&#8220;I want to become an engineer someday,&#8221; &#8220;I want skills that help with getting a job or changing jobs,&#8221; &#8220;I want to build real machines and robots&#8221;</strong> </p>



<p class="wp-block-paragraph"><strong>→</strong> <strong>SOLIDWORKS for Makers</strong> is the way to go! For an investment of a few dozen dollars a year, you get a skill that is widely used in mechanical design.</p>



<p class="wp-block-paragraph">&nbsp;</p>



<p class="wp-block-paragraph">Whichever one you choose, once you master it, it becomes a tool for turning your ideas into real objects.</p>



<p class="wp-block-paragraph">Start by installing whichever CAD software caught your eye and making something simple, even a cube!</p>



<p class="wp-block-paragraph">Thanks for reading.</p>

]]></content:encoded>
					
					<wfw:commentRss>https://sugitama-lab.tech/en/fusion-vs-solidworks/feed/</wfw:commentRss>
			<slash:comments>0</slash:comments>
		
		
		<post-id xmlns="com-wordpress:feed-additions:1">3638</post-id>	</item>
	</channel>
</rss>
